scholarly journals Spindle scaling is governed by cell boundary regulation of microtubule nucleation

2020 ◽  
Author(s):  
Elisa Maria Rieckhoff ◽  
Frederic Berndt ◽  
Stefan Golfier ◽  
Franziska Decker ◽  
Maria Elsner ◽  
...  
Keyword(s):  
Mitotic Spindle ◽  
Large Range ◽  
Zebrafish Embryos ◽  
Quantitative Microscopy ◽  
Microtubule Nucleation ◽  
Microtubule Polymerization ◽  
Egg Extracts ◽  
Boundary Regulation ◽  
Geometric Cues ◽  
Cellular Organelles

AbstractCellular organelles such as the mitotic spindle adjust their size to the dimensions of the cell. It is widely understood that spindle scaling is governed by regulation of microtubule polymerization. Here we use quantitative microscopy in living zebrafish embryos and Xenopus egg extracts in combination with theory to show that microtubule polymerization dynamics are insufficient to scale spindles and only contribute below a critical cell size. In contrast, microtubule nucleation governs spindle scaling for all cell sizes. We show that this hierarchical regulation arises from the partitioning of a nucleation inhibitor to the cell membrane. Our results reveal that cells differentially regulate microtubule number and length using distinct geometric cues to maintain a functional spindle architecture over a large range of cell sizes.

scholarly journals Autocatalytic microtubule nucleation determines the size and mass of spindles

2017 ◽  
Author(s):  
Franziska Decker ◽  
David Oriola ◽  
Benjamin Dalton ◽  
Jan Brugués
Keyword(s):  
Mitotic Spindle ◽  
Protein Concentration ◽  
Fundamental Problem ◽  
Quantitative Microscopy ◽  
Concentration Gradients ◽  
Microtubule Nucleation ◽  
Spatial Regulation ◽  
Egg Extracts ◽  
Spindle Structure ◽  
Autocatalytic Growth

AbstractRegulation of size and growth is a fundamental problem in biology. A prominent example is the formation of the mitotic spindle, where protein concentration gradients around chromosomes are thought to regulate spindle growth by controlling microtubule nucleation (1, 2). Previous evidence suggests that microtubules nucleate throughout the spindle structure (3-5). However, the mechanisms underlying microtubule nucleation and its spatial regulation are still unclear. Here, we developed an assay based on laser ablation to directly probe microtubule nucleation events in Xenopus laevis egg extracts. Combining this method with theory and quantitative microscopy, we show that the size of a spindle is controlled by autocatalytic growth of microtubules, driven by microtubule-stimulated microtubule nucleation. The autocatalytic activity of this nucleation system is spatially regulated by the limiting amounts of active microtubule nucleators, which decrease with distance from the chromosomes. Thus, the size of spindles is determined by the distance where one microtubule nucleates on average less than one new microtubule. This mechanism provides an upper limit to spindle size even when resources are not limiting and may have implications for spindle scaling during development (6, 7).

scholarly journals Kinesin-5 promotes microtubule nucleation and assembly by stabilizing a lattice-competent conformation of tubulin

2019 ◽  
Author(s):  
Geng-Yuan Chen ◽  
Ana B. Asenjo ◽  
Yalei Chen ◽  
Jake Mascaro ◽  
David F. J. Arginteanu ◽  
...  
Keyword(s):  
Mitotic Spindle ◽  
Polymerase Activity ◽  
Microtubule Nucleation ◽  
Domain Swap ◽  
Microtubule Polymerization ◽  
The Family ◽  
Microtubule Growth ◽  
Spindle Elongation ◽  
Necessary And Sufficient ◽  
Induced Changes

SummaryBesides sliding apart antiparallel microtubules during spindle elongation, the mitotic kinesin-5, Eg5 promotes microtubule polymerization, emphasizing its importance in mitotic spindle length control. Here, we characterize the Eg5 microtubule polymerase mechanism by assessing motor-induced changes in the longitudinal and lateral tubulin-tubulin bonds that form the microtubule lattice. Isolated Eg5 motor domains promote microtubule nucleation, growth and stability. Eg5 binds preferentially to microtubules over free tubulin, and colchicine-like inhibitors that stabilize the bent conformation of tubulin allosterically inhibit Eg5 binding, consistent with a model in which Eg5 induces a curved-to-straight transition in tubulin. Domain swap experiments establish that the family-specific Loop11, which resides near the nucleotide-sensing Switch-II domain, is necessary and sufficient for the polymerase activity of Eg5. Thus, we propose a microtubule polymerase mechanism in which Eg5 at the plus-end promotes a curved-to-straight transition in tubulin that enhances lateral bond formation and thereby promotes microtubule growth and stability.

scholarly journals Characterization of the TPX2 Domains Involved in Microtubule Nucleation and Spindle Assembly in Xenopus Egg Extracts

2004 ◽  
Vol 15 (12) ◽  
pp. 5318-5328 ◽  
Author(s):  
Stéphane Brunet ◽  
Teresa Sardon ◽  
Timo Zimmerman ◽  
Torsten Wittmann ◽  
Rainer Pepperkok ◽  
...  
Keyword(s):  
Spindle Assembly ◽  
Aurora A Kinase ◽  
Aurora A ◽  
Microtubule Nucleation ◽  
Terminal Domain ◽  
Large N ◽  
Egg Extracts ◽  
Xenopus Egg ◽  
Domain Functional ◽  
Xenopus Egg Extracts

TPX2 has multiple functions during mitosis, including microtubule nucleation around the chromosomes and the targeting of Xklp2 and Aurora A to the spindle. We have performed a detailed domain functional analysis of TPX2 and found that a large N-terminal domain containing the Aurora A binding peptide interacts directly with and nucleates microtubules in pure tubulin solutions. However, it cannot substitute the endogenous TPX2 to support microtubule nucleation in response to Ran guanosine triphosphate (GTP) and spindle assembly in egg extracts. By contrast, a large C-terminal domain of TPX2 that does not bind directly to pure microtubules and does not bind Aurora A kinase rescues microtubule nucleation in response to RanGTP and spindle assembly in TPX2-depleted extract. These and previous results suggest that under physiological conditions, TPX2 is essential for microtubule nucleation around chromatin and functions in a network of other molecules, some of which also are regulated by RanGTP.

The Xenopus protein kinase pEg2 associates with the centrosome in a cell cycle-dependent manner, binds to the spindle microtubules and is involved in bipolar mitotic spindle assembly

1998 ◽  
Vol 111 (5) ◽  
pp. 557-572 ◽  
Author(s):  
C. Roghi ◽  
R. Giet ◽  
R. Uzbekov ◽  
N. Morin ◽  
I. Chartrain ◽  
...  
Keyword(s):  
Cell Cycle ◽  
Protein Kinase ◽  
Mitotic Spindle ◽  
Cultured Cells ◽  
Dependent Manner ◽  
Egg Extracts ◽  
Pericentriolar Material ◽  
Spindle Microtubules ◽  
Cycle Dependent

By differential screening of a Xenopus laevis egg cDNA library, we have isolated a 2,111 bp cDNA which corresponds to a maternal mRNA specifically deadenylated after fertilisation. This cDNA, called Eg2, encodes a 407 amino acid protein kinase. The pEg2 sequence shows significant identity with members of a new protein kinase sub-family which includes Aurora from Drosophila and Ipl1 (increase in ploidy-1) from budding yeast, enzymes involved in centrosome migration and chromosome segregation, respectively. A single 46 kDa polypeptide, which corresponds to the deduced molecular mass of pEg2, is immunodetected in Xenopus oocyte and egg extracts, as well as in lysates of Xenopus XL2 cultured cells. In XL2 cells, pEg2 is immunodetected only in S, G2 and M phases of the cell cycle, where it always localises to the centrosomal region of the cell. In addition, pEg2 ‘invades’ the microtubules at the poles of the mitotic spindle in metaphase and anaphase. Immunoelectron microscopy experiments show that pEg2 is located precisely around the pericentriolar material in prophase and on the spindle microtubules in anaphase. We also demonstrate that pEg2 binds directly to taxol stabilised microtubules in vitro. In addition, we show that the presence of microtubules during mitosis is not necessary for an association between pEg2 and the centrosome. Finally we show that a catalytically inactive pEg2 kinase stops the assembly of bipolar mitotic spindles in Xenopus egg extracts.

scholarly journals Microinjection of Ca++-calmodulin causes a localized depolymerization of microtubules.

1983 ◽  
Vol 97 (6) ◽  
pp. 1918-1924 ◽  
Author(s):  
C Keith ◽  
M DiPaola ◽  
F R Maxfield ◽  
M L Shelanski
Keyword(s):  
Mitotic Spindle ◽  
Calcium Ion ◽  
Molar Ratio ◽  
Free Calcium ◽  
Local Concentration ◽  
Dependent Manner ◽  
Calcium Dependent ◽  
Molar Ratios ◽  
Microtubule Polymerization ◽  
Full Complement

The microinjection of calcium-saturated calmodulin into living fibroblasts causes the rapid disruption of microtubules and stress fibers in a sharply delimited region concentric with the injection site. This effect is specific to the calcium-bearing form of calmodulin; neither calcium-free calmodulin nor calcium ion at similar levels affects the cytoskeleton. If cells have previously been microinjected with calcium-free calmodulin, elevation of their intracellular calcium levels to 25 mM potentiates the disruption of microtubules throughout the cytoplasm. Approximately 400 mM free calcium is required to cause an equivalent disruption in uninjected cells. The level of calmodulin necessary to disrupt the full complement of cellular microtubules is found to be approximately in 2:1 molar ratio to tubulin dimer. These results indicate that calmodulin can be localized within the cytoplasm in a calcium-dependent manner and that it can act to regulate the calcium lability of microtubules at molar ratios that could be achieved locally within the cell. Our results are consistent with the hypothesis that calmodulin may be controlling microtubule polymerization equilibria in areas of high local concentration such as the mitotic spindle.

scholarly journals A requirement for MAP kinase in the assembly and maintenance of the mitotic spindle

2003 ◽  
Vol 161 (6) ◽  
pp. 1021-1028 ◽  
Author(s):  
Melinda M. Horne ◽  
Thomas M. Guadagno
Keyword(s):  
Map Kinase ◽  
Mitotic Spindle ◽  
Kinase Inhibitor ◽  
Map Kinase Phosphatase ◽  
Egg Extracts ◽  
Xenopus Egg ◽  
Multiple Spindle ◽  
Xenopus Egg Extracts ◽  
Nih 3T3 ◽  
Bipolar Spindles

Circumstantial evidence has suggested the possibility of microtubule-associated protein (MAP) kinase's involvement in spindle regulation. To test this directly, we asked whether MAP kinase was required for spindle assembly in Xenopus egg extracts. Either the inhibition or the depletion of endogenous p42 MAP kinase resulted in defective spindle structures resembling asters or half-spindles. Likewise, an increase in the length and polymerization of microtubules was measured in aster assays suggesting a role for MAP kinase in regulating microtubule dynamics. Consistent with this, treatment of extracts with either a specific MAP kinase kinase inhibitor or a MAP kinase phosphatase resulted in the rapid disassembly of bipolar spindles into large asters. Finally, we report that mitotic progression in the absence of MAP kinase signaling led to multiple spindle abnormalities in NIH 3T3 cells. We therefore propose that MAP kinase is a key regulator of the mitotic spindle.

scholarly journals TPX2 phosphorylation maintains metaphase spindle length by regulating microtubule flux

2015 ◽  
Vol 210 (3) ◽  
pp. 373-383 ◽  
Author(s):  
Jingyan Fu ◽  
Minglei Bian ◽  
Guangwei Xin ◽  
Zhaoxuan Deng ◽  
Jia Luo ◽  
...  
Keyword(s):  
Steady State ◽  
Mitotic Spindle ◽  
Microtubule Dynamics ◽  
Flux Rate ◽  
Aurora A ◽  
Null Mutant ◽  
Constant Length ◽  
Microtubule Polymerization ◽  
Spindle Microtubules

A steady-state metaphase spindle maintains constant length, although the microtubules undergo intensive dynamics. Tubulin dimers are incorporated at plus ends of spindle microtubules while they are removed from the minus ends, resulting in poleward movement. Such microtubule flux is regulated by the microtubule rescue factors CLASPs at kinetochores and depolymerizing protein Kif2a at the poles, along with other regulators of microtubule dynamics. How microtubule polymerization and depolymerization are coordinated remains unclear. Here we show that TPX2, a microtubule-bundling protein and activator of Aurora A, plays an important role. TPX2 was phosphorylated by Aurora A during mitosis. Its phospho-null mutant caused short metaphase spindles coupled with low microtubule flux rate. Interestingly, phosphorylation of TPX2 regulated its interaction with CLASP1 but not Kif2a. The effect of its mutant in shortening the spindle could be rescued by codepletion of CLASP1 and Kif2a that abolished microtubule flux. Together we propose that Aurora A–dependent TPX2 phosphorylation controls mitotic spindle length through regulating microtubule flux.

scholarly journals The kinesin-8 Kip3 scales anaphase spindle length by suppression of midzone microtubule polymerization

2014 ◽  
Vol 204 (6) ◽  
pp. 965-975 ◽  
Author(s):  
Rania S. Rizk ◽  
Katherine A. DiScipio ◽  
Kathleen G. Proudfoot ◽  
Mohan L. Gupta
Keyword(s):  
Mitotic Spindle ◽  
Molecular Mechanisms ◽  
Spindle Microtubule ◽  
Microtubule Polymerization ◽  
Sister Chromatids ◽  
Final Length ◽  
Spindle Microtubules ◽  
Spindle Elongation ◽  
Spindle Function ◽  
Yeast Mutants

Mitotic spindle function is critical for cell division and genomic stability. During anaphase, the elongating spindle physically segregates the sister chromatids. However, the molecular mechanisms that determine the extent of anaphase spindle elongation remain largely unclear. In a screen of yeast mutants with altered spindle length, we identified the kinesin-8 Kip3 as essential to scale spindle length with cell size. Kip3 is a multifunctional motor protein with microtubule depolymerase, plus-end motility, and antiparallel sliding activities. Here we demonstrate that the depolymerase activity is indispensable to control spindle length, whereas the motility and sliding activities are not sufficient. Furthermore, the microtubule-destabilizing activity is required to counteract Stu2/XMAP215-mediated microtubule polymerization so that spindle elongation terminates once spindles reach the appropriate final length. Our data support a model where Kip3 directly suppresses spindle microtubule polymerization, limiting midzone length. As a result, sliding forces within the midzone cannot buckle spindle microtubules, which allows the cell boundary to define the extent of spindle elongation.

scholarly journals Theory of microtubule length regulation in antiparallel overlaps

2019 ◽  
Author(s):  
Hui-Shun Kuan ◽  
Meredith D. Betterton
Keyword(s):  
Steady State ◽  
Cell Division ◽  
Mitotic Spindle ◽  
Motor Proteins ◽  
Critical Concentration ◽  
Binding Kinetics ◽  
Kinesin Motor ◽  
Microtubule Polymerization ◽  
Length Regulation ◽  
Theory And Experiment

AbstractDuring cell division, microtubules in the mitotic spindle form antiparallel overlaps near the center of the spindle. Kinesin motor proteins alter microtubule polymerization dynamics to regulate the length of these overlaps to maintain spindle integrity. Length regulation of antiparallel overlaps has been reconstituted with purified microtubules, crosslinkers, and motors. Here we develop a theory of steady-state overlap length which depends on the filament plus-end motor concentration, determined by a balance between motor arrival (motor binding and stepping in the overlap) and motor departure (motor unbinding from filament tips during depolymerization) in the absence of motor-driven sliding. Assuming that motors processively depolymerize and exhibit altered binding kinetics near MT plus-ends improves the agreement between theory and experiment. Our theory explains the origin of the experimentally observed critical concentration, a minimum motor concentration to observe a steady-state overlap length.

Sign in / Sign up

Export Citation Format

Share Document