scholarly journals Biophysical Characterisation of Human LincRNA-p21 Sense and Antisense Alu Inverted Repeats

2021 ◽  
Author(s):  
Michael H. D’Souza ◽  
Tyler Mrozowich ◽  
Maulik D. Badmalia ◽  
Mitchell Geeraert ◽  
Angela Frederickson ◽  
...  

AbstractHuman Long Intergenic Noncoding RNA-p21 (LincRNA-p21) is a regulatory noncoding RNA that plays an important role in promoting apoptosis. LincRNA-p21 is also critical in down-regulating many p53 target genes through its interaction with a p53 repressive complex. The interaction between LincRNA-p21 and the repressive complex is likely dependent on the RNA tertiary structure. Previous studies have determined the two-dimensional secondary structures of the sense and antisense human LincRNA-p21 AluSx1 IRs using SHAPE. However, there were no insights into its three-dimensional structure. Therefore, we in vitro transcribed the sense and antisense regions of LincRNA-p21 AluSx1 Inverted Repeats (IRs) and performed analytical ultracentrifugation, size exclusion chromatography, light scattering, and small angle X-ray scattering (SAXS) studies. Based on these studies, we determined low-resolution, three-dimensional structures of sense and antisense LincRNA-p21. By adapting previously known two-dimensional information, we calculated their sense and antisense high-resolution models and determined that they agree with the low-resolution structures determined using SAXS. Thus, our integrated approach provides insights into the structure of LincRNA-p21 Alu IRs. Our study also offers a viable pipeline for combining the secondary structure information with biophysical and computational studies to obtain high-resolution atomistic models for long noncoding RNAs.

The technique of freeze-etching is illustrated with reference to striated muscle. Besides features of immediate biological interest, the material demonstrates various ways in which the process may be used in general to yield new information. These fall broadly into two classes: ( a ) qualitative: visualizing structures not readily seen by other methods, for example, general three-dimensional structure (low resolution) and membrane particles (high resolution); ( b ) quantitative, for example, the distribution of membrane features over extensive uneven surfaces (low and high resolution).


Author(s):  
Francesco Simonetti ◽  
Lianjie Huang

Tomography of complex three-dimensional objects with ultrasound or microwave has been a long-standing goal since the introduction of these technologies after World War II. While current state-of-the-art systems can provide high-resolution images of cylindrical objects characterized by a two-dimensional structure, the three-dimensional case remains an open challenge owing to current limitations of sensor technology and computer power. Here, this problem is addressed by means of a synthetic aperture technique that, while using hardware technology developed for two-dimensional problems, accounts for the complexity of three-dimensional scattering and leads to high-resolution three-dimensional reconstructions. In this paper, we present the theoretical formulation of this new approach and illustrate it by means of a numerical example.


1991 ◽  
Vol 69 (5-6) ◽  
pp. 322-335
Author(s):  
E. Charretier ◽  
M. Guéron

Knowledge of three-dimensional structure is a key factor in protein engineering. It is useful, for example, in predicting and understanding the functional consequences of specific substitution of one or more amino acids of the polypeptide chain. It is also necessary for the design of new effectors or analogs of the substrates of enzymes and receptors. X-ray diffraction by crystals of the biomolecule was for a long time the only method of determining three-dimensional structures. In the last 5 years, it has been joined by a new technique, two-dimensional nuclear magnetic resonance (2D NMR), which can resolve the structure of middle-sized proteins ( < 10 kilodaltons). The technique is applied on solutions whose pH, ionic strength, and temperature can be chosen and changed. The two basic measurements, COSY and NOESY, detect respectively the systems of hydrogen nuclei, or protons, coupled through covalent bonds, and those in which the interproton distances are less than 0.5 nm. A systematic strategy leads from resonance assignments of the two-dimensional spectrum to molecular modeling with constraints and finally to the determination of the molecular structure in the solution. Much sophistication is needed even today for the first task, the assignment of the resonances. Each of the COSY and NOESY spectra is a two-dimensional map, where the diagonal line is the one-dimensional spectrum, and the off-diagonal peaks indicate connectivities between protons. Peak assignment to a specific type of amino acid is based on the pattern of scalar couplings observed in the COSY spectrum. Next, the amino acids are positioned in the primary sequence, using the spatial proximities of polypeptide chain protons, as observed in the NOESY spectrum. The principal secondary structures (α helix, β sheets, etc.) are then identified by their specific connectivities. The tertiary structure is detected by NOESY connectivities between protons of different amino acids which are far apart in the primary sequence. The distance constraints from the NOESY connectivities also provide the starting point for modeling the tertiary structure. This is then refined using distance geometry and molecular dynamics algorithms. The resolution of the structures obtained with the help of recent algorithmic developments may be comparable to that provided by X-ray diffraction. The COSY measurement can be completed or substituted by other measurements, useful albeit more complex. For example, the HOHAHA experiment, currently in wide use, gives the correlations through multiple covalent bonds. Multiquanta experiments, which select systems of a given number of coupled spins, provide spectral simplification. To help with the sequential assignment, which remains a limiting step, one may substitute amino acids isotopically labeled with 15N or 13C. Nuclear magnetic resonance of these nuclei is detected either directly or by heteronuclear proton NMR. In the latter case, heteronuclear cross-peaks indicate connectivities between protons and the isotopic nuclei, 1SN and 13C. This labeling is very useful for proteins with more than 100 amino acids and for proteins exhibiting low-resolution spectra. Resolution can also be enhanced by the combination of two-dimensional experiments, giving rise to 3D NMR. The graphic representation of a three-dimensional experiment is a cube whose sections correspond to virtual two-dimensional measurements. The 3D NMR can be homonuclear or, in the case of isotopically substituted proteins, heteronuclear. The time for a single experiment reaches several days. The memory needed for data acquisition and processing is greater than for two-dimensional experiments. Large parts of the data processing, such as peak detection or the recognition of secondary structure connectivities can be automated. Two-dimensional NMR is becoming a routine technique for peptide and protein structure determination in the laboratories of the pharmaceutical firms.Key words: protein engineering, three-dimensional structure, nuclear magnetic resonance, correlated spectroscopy, nuclear Overhauser effect spectroscopy.


Author(s):  
H.A. Cohen ◽  
T.W. Jeng ◽  
W. Chiu

This tutorial will discuss the methodology of low dose electron diffraction and imaging of crystalline biological objects, the problems of data interpretation for two-dimensional projected density maps of glucose embedded protein crystals, the factors to be considered in combining tilt data from three-dimensional crystals, and finally, the prospects of achieving a high resolution three-dimensional density map of a biological crystal. This methodology will be illustrated using two proteins under investigation in our laboratory, the T4 DNA helix destabilizing protein gp32*I and the crotoxin complex crystal.


Author(s):  
Kenneth H. Downing ◽  
Hu Meisheng ◽  
Hans-Rudolf Went ◽  
Michael A. O'Keefe

With current advances in electron microscope design, high resolution electron microscopy has become routine, and point resolutions of better than 2Å have been obtained in images of many inorganic crystals. Although this resolution is sufficient to resolve interatomic spacings, interpretation generally requires comparison of experimental images with calculations. Since the images are two-dimensional representations of projections of the full three-dimensional structure, information is invariably lost in the overlapping images of atoms at various heights. The technique of electron crystallography, in which information from several views of a crystal is combined, has been developed to obtain three-dimensional information on proteins. The resolution in images of proteins is severely limited by effects of radiation damage. In principle, atomic-resolution, 3D reconstructions should be obtainable from specimens that are resistant to damage. The most serious problem would appear to be in obtaining high-resolution images from areas that are thin enough that dynamical scattering effects can be ignored.


Author(s):  
José L. Carrascosa ◽  
José M. Valpuesta ◽  
Hisao Fujisawa

The head to tail connector of bacteriophages plays a fundamental role in the assembly of viral heads and DNA packaging. In spite of the absence of sequence homology, the structure of connectors from different viruses (T4, Ø29, T3, P22, etc) share common morphological features, that are most clearly revealed in their three-dimensional structure. We have studied the three-dimensional reconstruction of the connector protein from phage T3 (gp 8) from tilted view of two dimensional crystals obtained from this protein after cloning and purification.DNA sequences including gene 8 from phage T3 were cloned, into Bam Hl-Eco Rl sites down stream of lambda promotor PL, in the expression vector pNT45 under the control of cI857. E R204 (pNT89) cells were incubated at 42°C for 2h, harvested and resuspended in 20 mM Tris HC1 (pH 7.4), 7mM 2 mercaptoethanol, ImM EDTA. The cells were lysed by freezing and thawing in the presence of lysozyme (lmg/ml) and ligthly sonicated. The low speed supernatant was precipitated by ammonium sulfate (60% saturated) and dissolved in the original buffer to be subjected to gel nitration through Sepharose 6B, followed by phosphocellulose colum (Pll) and DEAE cellulose colum (DE52). Purified gp8 appeared at 0.3M NaCl and formed crystals when its concentration increased above 1.5 mg/ml.


Author(s):  
Kathryn Grandfield ◽  
Anders Palmquist ◽  
Håkan Engqvist

Interfacial relationships between biomaterials and tissues strongly influence the success of implant materials and their long-term functionality. Owing to the inhomogeneity of biological tissues at an interface, in particular bone tissue, two-dimensional images often lack detail on the interfacial morphological complexity. Furthermore, the increasing use of nanotechnology in the design and production of biomaterials demands characterization techniques on a similar length scale. Electron tomography (ET) can meet these challenges by enabling high-resolution three-dimensional imaging of biomaterial interfaces. In this article, we review the fundamentals of ET and highlight its recent applications in probing the three-dimensional structure of bioceramics and their interfaces, with particular focus on the hydroxyapatite–bone interface, titanium dioxide–bone interface and a mesoporous titania coating for controlled drug release.


2003 ◽  
Vol 3 ◽  
pp. 623-635 ◽  
Author(s):  
Ivan Y. Torshin ◽  
Robert W. Harrison

How a unique three-dimensional structure is rapidly formed from the linear sequence of a polypeptide is one of the important questions in contemporary science. Apart from biological context ofin vivoprotein folding (which has been studied only for a few proteins), the roles of the fundamental physical forces in thein vitrofolding remain largely unstudied. Despite a degree of success in using descriptions based on statistical and/or thermodynamic approaches, few of the current models explicitly include more basic physical forces (such as electrostatics and Van Der Waals forces). Moreover, the present-day models rarely take into account that the protein folding is, essentially, a rapid process that produces a highly specific architecture. This review considers several physical models that may provide more direct links between sequence and tertiary structure in terms of the physical forces. In particular, elaboration of such simple models is likely to produce extremely effective computational techniques with value for modern genomics.


Sign in / Sign up

Export Citation Format

Share Document