scholarly journals Microhomology-mediated CRISPR/Cas9-based method for genome editing in fission yeast

2018 ◽  
Author(s):  
Aki Hayashi ◽  
Katsunori Tanaka
Keyword(s):  
Fission Yeast ◽  
Genome Editing ◽  
High Frequency ◽  
Target Genes ◽  
Point Mutations ◽  
Inducible Promoter ◽  
Double Strand Breaks ◽  
End Joining ◽  
Strand Breaks ◽  
Guide Rna

The CRISPR/Cas9 system enables the editing of genomes of numerous organisms through the induction of the double-strand breaks (DSB) at specific chromosomal targets. We improved the CRISPR/Cas9 system to ease the direct introduction of a point mutation or a tagging sequence into the chromosome by combining it with the microhomology mediated end joining (MMEJ)-based genome editing in fission yeast. We constructed convenient cloning vectors, which possessed a guide RNA (gRNA) expression module, or the humanized Streptococcus pyogenes Cas9 gene that is expressed under the control of an inducible promoter to avoid the needless expression, or both a gRNA and Cas9 gene. Using this system, we attempted the MMEJ-mediated genome editing and found that the MMEJ-mediated method provides high-frequency genome editing at target loci without the need of a long donor DNA. Using short oligonucleotides, we successfully introduced point mutations into two target genes at high frequency. We also precisely integrated the sequences for epitope and GFP tagging using donor DNA possessing microhomology into the target loci, which enabled us to obtain cells expressing N-terminally tagged fusion proteins. This system could expedite genome editing in fission yeast, and could be applicable to other organisms.

scholarly journals CRISPR-Cas12a (Cpf1): A Versatile Tool in the Plant Genome Editing Tool Box for Agricultural Advancement

2020 ◽  
Author(s):  
Anindya Bandyopadhyay ◽  
Nagesh Kancharla ◽  
vivek javalkote ◽  
santanu dasgupta ◽  
Thomas Brutnell
Keyword(s):  
Genome Editing ◽  
Genome Engineering ◽  
Temperature Stability ◽  
Double Strand Breaks ◽  
Plant Genome ◽  
Strand Breaks ◽  
Guide Rna ◽  
Versatile Tool ◽  
Type V ◽  
Global Population

Global population is predicted to approach 10 billion by 2050, an increase of over 2 billion from today. To meet the demands of growing, geographically and socio-economically diversified nations, we need to diversity and expand agricultural production. This expansion of agricultural productivity will need to occur under increasing biotic, and environmental constraints driven by climate change. Clustered regularly interspaced short palindromic repeats-site directed nucleases (CRISPR-SDN) and similar genome editing technologies will likely be key enablers to meet future agricultural needs. While the application of CRISPR-Cas9 mediated genome editing has led the way, the use of CRISPR-Cas12a is also increasing significantly for genome engineering of plants. The popularity of the CRISPR-Cas12a, the type V (class-II) system, is gaining momentum because of its versatility and simplified features. These include the use of a small guide RNA devoid of trans-activating crispr RNA (tracrRNA), targeting of T-rich regions of the genome where Cas9 is not suitable for use, RNA processing capability facilitating simpler multiplexing, and its ability to generate double strand breaks (DSB) with staggered ends. Many monocot and dicot species have been successfully edited using this Cas12a system and further research is ongoing to improve its efficiency in plants, including improving the temperature stability of the Cas12a enzyme, identifying new variants of Cas12a or synthetically producing Cas12a with flexible PAM sequences. In this review we provide a comparative survey of CRISPR-Cas12a and Cas9, and provide a perspective on applications of CRISPR-Cas12 in agriculture.

scholarly journals A cloning-free method for CRISPR/Cas9-mediated genome editing in fission yeast

2017 ◽  
Author(s):  
Xiao-Ran Zhang ◽  
Jia-Bei He ◽  
Yi-Zheng Wang ◽  
Li-Lin Du
Keyword(s):  
Fission Yeast ◽  
Genome Editing ◽  
Dna Cleavage ◽  
Genomic Sequence ◽  
Yeast Cells ◽  
Target Sequence ◽  
Dna Double Strand Breaks ◽  
Strand Breaks ◽  
Guide Rna ◽  
Sequence Deletion

ABSTRACTThe CRISPR/Cas9 system, which relies on RNA-guided DNA cleavage to induce site-specific DNA double-strand breaks, is a powerful tool for genome editing. This system has been successfully adapted for the fission yeast Schizosaccharomyces pombe by expressing Cas9 and the single-guide RNA (sgRNA) from a plasmid. In the procedures published to date, the cloning step that introduces a specific sgRNA target sequence into the plasmid is the most tedious and time-consuming. To increase the efficiency of applying the CRISPR/Cas9 system in fission yeast, we here developed a cloning-free procedure that uses gap repair in fission yeast cells to assemble two linear DNA fragments, a gapped Cas9-encoding plasmid and a PCR-amplified sgRNA insert, into a circular plasmid. Both fragments contain only a portion of the ura4 or bsdMX marker so that only the correctly assembled plasmid can confer uracil prototrophy or blasticidin resistance. We show that this gap-repair-based and cloning-free CRISPR/Cas9 procedure permits rapid and efficient point mutation knock-in, endogenous N-terminal tagging, and genomic sequence deletion in fission yeast.

scholarly journals A CRISPR/Cas9-based method and primer design tool for seamless genome editing in fission yeast

2017 ◽  
Vol 1 ◽  
pp. 19 ◽  
Author(s):  
María Rodríguez-López ◽  
Cristina Cotobal ◽  
Oscar Fernández-Sánchez ◽  
Natalia Borbarán Bravo ◽  
Risky Oktriani ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Genome Editing ◽  
Point Mutations ◽  
Restriction Enzymes ◽  
Design Tool ◽  
Selection Marker ◽  
Guide Rna ◽  
Non Coding Rna ◽  
Pcr Product ◽  
Genomic Regions

In the fission yeast Schizosaccharomyces pombe the prevailing approach for gene manipulations is based on homologous recombination of a PCR product that contains genomic target sequences and a selectable marker. The CRISPR/Cas9 system has recently been implemented in fission yeast, which allows for seamless genome editing without integration of a selection marker or leaving any other genomic ‘scars’. The published method involves manual design of the single guide RNA (sgRNA), and digestion of a large plasmid with a problematic restriction enzyme to clone the sgRNA. To increase the efficiency of this approach, we have established and optimized a PCR-based system to clone the sgRNA without restriction enzymes into a plasmid with a dominant natMX6 (nourseothricin) selection marker. We also provide a web-tool, CRISPR4P, to support the design of the sgRNAs and the primers required for the entire process of seamless DNA deletion. Moreover, we report the preparation of G1-synchronized and cryopreserved S. pombe cells, which greatly increases the efficiency and speed for transformations, and may also facilitate standard gene manipulations. Applying this optimized CRISPR/Cas9-based approach, we have successfully deleted over 80 different non-coding RNA genes, which are generally lowly expressed, and have inserted 7 point mutations in 4 different genomic regions.

scholarly journals Simultaneous precise editing of multiple genes in human cells

2019 ◽  
Vol 47 (19) ◽  
pp. e116-e116 ◽  
Author(s):  
Stephan Riesenberg ◽  
Manjusha Chintalapati ◽  
Dominik Macak ◽  
Philipp Kanis ◽  
Tomislav Maricic ◽  
...  
Keyword(s):  
Genome Editing ◽  
Kinase Inhibitor ◽  
Double Strand Breaks ◽  
End Joining ◽  
Nucleotide Substitutions ◽  
Strand Breaks ◽  
Homology Directed Repair ◽  
A Genome ◽  
Dependent Protein ◽  
Non Homologous End Joining

Abstract When double-strand breaks are introduced in a genome by CRISPR they are repaired either by non-homologous end joining (NHEJ), which often results in insertions or deletions (indels), or by homology-directed repair (HDR), which allows precise nucleotide substitutions to be introduced if a donor oligonucleotide is provided. Because NHEJ is more efficient than HDR, the frequency with which precise genome editing can be achieved is so low that simultaneous editing of more than one gene has hitherto not been possible. Here, we introduced a mutation in the human PRKDC gene that eliminates the kinase activity of the DNA-dependent protein kinase catalytic subunit (DNA-PKcs). This results in an increase in HDR irrespective of cell type and CRISPR enzyme used, sometimes allowing 87% of chromosomes in a population of cells to be precisely edited. It also allows for precise editing of up to four genes simultaneously (8 chromosomes) in the same cell. Transient inhibition of DNA-PKcs by the kinase inhibitor M3814 is similarly able to enhance precise genome editing.

scholarly journals A CRISPR/Cas9-based method and primer design tool for seamless genome editing in fission yeast

2016 ◽  
Vol 1 ◽  
pp. 19 ◽  
Author(s):  
María Rodríguez-López ◽  
Cristina Cotobal ◽  
Oscar Fernández-Sánchez ◽  
Natalia Borbarán Bravo ◽  
Risky Oktriani ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Genome Editing ◽  
Point Mutations ◽  
Restriction Enzymes ◽  
Design Tool ◽  
Selection Marker ◽  
Guide Rna ◽  
Non Coding Rna ◽  
Pcr Product ◽  
Genomic Regions

In the fission yeast Schizosaccharomyces pombe the prevailing approach for gene manipulations is based on homologous recombination of a PCR product that contains genomic target sequences and a selectable marker. The CRISPR/Cas9 system has recently been implemented in fission yeast, which allows for seamless genome editing without integration of a selection marker or leaving any other genomic ‘scars’. The published method involves manual design of the single guide RNA (sgRNA), and digestion of a large plasmid with a problematic restriction enzyme to clone the sgRNA. To increase the efficiency of this approach, we have established and optimized a PCR-based system to clone the sgRNA without restriction enzymes into a plasmid with a dominant natMX6 (nourseothricin) selection marker. We also provide a web-tool, CRISPR4P, to support the design of the sgRNAs and the primers required for the entire process of seamless DNA deletion. Moreover, we report the preparation of G1-synchronized and cryopreserved S. pombe cells, which greatly increases the efficiency and speed for transformations, and may also facilitate standard gene manipulations. Applying this optimized CRISPR/Cas9-based approach, we have successfully deleted over 80 different non-coding RNA genes, which are generally lowly expressed, and have inserted 7 point mutations in 4 different genomic regions.

scholarly journals A CRISPR/Cas9-based method and primer design tool for seamless genome editing in fission yeast

2017 ◽  
Vol 1 ◽  
pp. 19 ◽  
Author(s):  
María Rodríguez-López ◽  
Cristina Cotobal ◽  
Oscar Fernández-Sánchez ◽  
Natalia Borbarán Bravo ◽  
Risky Oktriani ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Genome Editing ◽  
Point Mutations ◽  
Restriction Enzymes ◽  
Design Tool ◽  
Selection Marker ◽  
Guide Rna ◽  
Non Coding Rna ◽  
Pcr Product ◽  
Genomic Regions

In the fission yeast Schizosaccharomyces pombe the prevailing approach for gene manipulations is based on homologous recombination of a PCR product that contains genomic target sequences and a selectable marker. The CRISPR/Cas9 system has recently been implemented in fission yeast, which allows for seamless genome editing without integration of a selection marker or leaving any other genomic ‘scars’. The published method involves manual design of the single guide RNA (sgRNA), and digestion of a large plasmid with a problematic restriction enzyme to clone the sgRNA. To increase the efficiency of this approach, we have established and optimized a PCR-based system to clone the sgRNA without restriction enzymes into a plasmid with a dominant natMX6 (nourseothricin) selection marker. We also provide a web-tool, CRISPR4P, to support the design of the sgRNAs and the primers required for the entire process of seamless DNA deletion. Moreover, we report the preparation of G1-synchronized and cryopreserved S. pombe cells, which greatly increases the efficiency and speed for transformations, and may also facilitate standard gene manipulations. Applying this optimized CRISPR/Cas9-based approach, we have successfully deleted over 80 different non-coding RNA genes, which are generally lowly expressed, and have inserted 7 point mutations in 4 different genomic regions.

scholarly journals CRISPR-Cas12a exploits R-loop asymmetry to form double-strand breaks

eLife ◽  
2020 ◽  
Vol 9 ◽  
Author(s):  
Joshua C Cofsky ◽  
Deepti Karandur ◽  
Carolyn J Huang ◽  
Isaac P Witte ◽  
John Kuriyan ◽  
...  
Keyword(s):  
Genome Editing ◽  
Active Site ◽  
Strand Break ◽  
Double Strand Breaks ◽  
Loop Structure ◽  
Strand Breaks ◽  
Guide Rna ◽  
Double Stranded Dna ◽  
Type V ◽  
Dna Substrate

Type V CRISPR-Cas interference proteins use a single RuvC active site to make RNA-guided breaks in double-stranded DNA substrates, an activity essential for both bacterial immunity and genome editing. The best-studied of these enzymes, Cas12a, initiates DNA cutting by forming a 20-nucleotide R-loop in which the guide RNA displaces one strand of a double-helical DNA substrate, positioning the DNase active site for first-strand cleavage. However, crystal structures and biochemical data have not explained how the second strand is cut to complete the double-strand break. Here, we detect intrinsic instability in DNA flanking the RNA-3′ side of R-loops, which Cas12a can exploit to expose second-strand DNA for cutting. Interestingly, DNA flanking the RNA-5′ side of R-loops is not intrinsically unstable. This asymmetry in R-loop structure may explain the uniformity of guide RNA architecture and the single-active-site cleavage mechanism that are fundamental features of all type V CRISPR-Cas systems.

scholarly journals Methods Favoring Homology-Directed Repair Choice in Response to CRISPR/Cas9 Induced-Double Strand Breaks

2020 ◽  
Vol 21 (18) ◽  
pp. 6461
Author(s):  
Han Yang ◽  
Shuling Ren ◽  
Siyuan Yu ◽  
Haifeng Pan ◽  
Tingdong Li ◽  
...  
Keyword(s):  
Mammalian Cells ◽  
Gene Editing ◽  
Initial Step ◽  
Double Strand Breaks ◽  
Repair Pathway ◽  
End Joining ◽  
Strand Breaks ◽  
Guide Rna ◽  
Homology Directed Repair ◽  
Repair Pathways

Precise gene editing is—or will soon be—in clinical use for several diseases, and more applications are under development. The programmable nuclease Cas9, directed by a single-guide RNA (sgRNA), can introduce double-strand breaks (DSBs) in target sites of genomic DNA, which constitutes the initial step of gene editing using this novel technology. In mammals, two pathways dominate the repair of the DSBs—nonhomologous end joining (NHEJ) and homology-directed repair (HDR)—and the outcome of gene editing mainly depends on the choice between these two repair pathways. Although HDR is attractive for its high fidelity, the choice of repair pathway is biased in a biological context. Mammalian cells preferentially employ NHEJ over HDR through several mechanisms: NHEJ is active throughout the cell cycle, whereas HDR is restricted to S/G2 phases; NHEJ is faster than HDR; and NHEJ suppresses the HDR process. This suggests that definitive control of outcome of the programmed DNA lesioning could be achieved through manipulating the choice of cellular repair pathway. In this review, we summarize the DSB repair pathways, the mechanisms involved in choice selection based on DNA resection, and make progress in the research investigating strategies that favor Cas9-mediated HDR based on the manipulation of repair pathway choice to increase the frequency of HDR in mammalian cells. The remaining problems in improving HDR efficiency are also discussed. This review should facilitate the development of CRISPR/Cas9 technology to achieve more precise gene editing.

Sign in / Sign up

Export Citation Format

Share Document