scholarly journals XAS at the Canadian Macromolecular Crystallography Facility

2014 ◽  
Vol 70 (a1) ◽  
pp. C1525-C1525
Author(s):  
Julien Cotelesage ◽  
Pawel Grochulski ◽  
Michel Fodje ◽  
James Gorin ◽  
Kathryn Janzen ◽  
...  
Keyword(s):  
Data Collection ◽  
Diffraction Data ◽  
Three Dimensional ◽  
Minimal Risk ◽  
Macromolecular Crystallography ◽  
X Ray ◽  
Biologically Relevant ◽  
Wide Range ◽  
X Ray Absorption ◽  
Do So

Recent additions to the Canadian Macromolecular Crystallography Facility have expanded the capabilities of its bending magnet beamline. It is now possible to perform x-ray absorption spectroscopy (XAS) on crystals. A wide range of biologically relevant metals can be further studied, supplementing diffraction data. XAS can be used to determine if metalloproteins are photoreducing during diffraction data collection. The geometries of metal complexes can also be inferred with near-edge and EXAFS data, often more accurately than crystallography. CMCF-BM can be employed to do the abovementioned techniques on powder and solution samples that contain a metal of interest. One XAS-based technique that shows promise is single crystal plane polarized EXAFS. This technique combines crystallographic data with the findings from XAS to yield a high resolution three dimensional atomic model. More recently a number of the procedural steps required for the acquisition of XAS-based data have been automated in the MxDC software suite. These changes to data collection make it easier for users new to these disciplines to run the XAS-based experiments. By having the necessary equipment to do XAS at a protein crystallography facility, researchers who may not have had the opportunity delve into the field of XAS now can do so with minimal risk in terms of materials, funds and time.

Optimizing the spatial distribution of dose in X-ray macromolecular crystallography

2012 ◽  
Vol 20 (1) ◽  
pp. 49-57 ◽  
Author(s):  
Oliver B. Zeldin ◽  
Markus Gerstel ◽  
Elspeth F. Garman
Keyword(s):  
Spatial Distribution ◽  
Data Collection ◽  
Rotation Axis ◽  
Macromolecular Crystallography ◽  
X Ray ◽  
Crystal Shapes ◽  
Peak Dose ◽  
Wide Range ◽  
Helical Scan ◽  
Crystal Volume

X-ray data collection for macromolecular crystallography can lead to highly inhomogeneous distributions of dose within the crystal volume for cases when the crystal is larger than the beam or when the beam is non-uniform (Gaussian-like), particularly when crystal rotation is fully taken into account. Here the spatial distribution of dose is quantitatively modelled in order to compare the effectiveness of two dose-spreading data-collection protocols: helical scanning and translational collection. Their effectiveness in reducing the peak dose per unit diffraction is investigatedviasimulations for four common crystal shapes (cube, plate, long and short needles) and beams with a wide range of full width half maximum values. By inspection of the chosen metric, it is concluded that the optimum strategy is always to use as flat (top-hat) a beam as possible and to either match the beam size in both dimensions to the crystal, or to perform a helical scan with a beam which is narrow along the rotation axis and matched to the crystal size along the perpendicular axis. For crystal shapes where this is not possible, the reduction in peak dose per unit diffraction achieved through dose spreading is quantified and tabulated as a reference for experimenters.

scholarly journals A Medipix quantum area detector allows rotation electron diffraction data collection from submicrometre three-dimensional protein crystals

2013 ◽  
Vol 69 (7) ◽  
pp. 1223-1230 ◽  
Author(s):  
Igor Nederlof ◽  
Eric van Genderen ◽  
Yao-Wang Li ◽  
Jan Pieter Abrahams
Keyword(s):  
Electron Diffraction ◽  
Data Collection ◽  
Diffraction Data ◽  
Three Dimensional ◽  
Protein Crystal ◽  
Protein Crystals ◽  
Electron Diffraction Data ◽  
Single Shot ◽  
X Ray ◽  
Area Detector

When protein crystals are submicrometre-sized, X-ray radiation damage precludes conventional diffraction data collection. For crystals that are of the order of 100 nm in size, at best only single-shot diffraction patterns can be collected and rotation data collection has not been possible, irrespective of the diffraction technique used. Here, it is shown that at a very low electron dose (at most 0.1 e− Å−2), a Medipix2 quantum area detector is sufficiently sensitive to allow the collection of a 30-frame rotation series of 200 keV electron-diffraction data from a single ∼100 nm thick protein crystal. A highly parallel 200 keV electron beam (λ = 0.025 Å) allowed observation of the curvature of the Ewald sphere at low resolution, indicating a combined mosaic spread/beam divergence of at most 0.4°. This result shows that volumes of crystal with low mosaicity can be pinpointed in electron diffraction. It is also shown that strategies and data-analysis software (MOSFLMandSCALA) from X-ray protein crystallography can be used in principle for analysing electron-diffraction data from three-dimensional nanocrystals of proteins.

scholarly journals Visualization of protein crystals by high-energy phase-contrast X-ray imaging

2019 ◽  
Vol 75 (11) ◽  
pp. 947-958 ◽  
Author(s):  
Maxim Polikarpov ◽  
Gleb Bourenkov ◽  
Irina Snigireva ◽  
Anatoly Snigirev ◽  
Sophie Zimmermann ◽  
...  
Keyword(s):  
Synchrotron Radiation ◽  
Data Collection ◽  
Diffraction Data ◽  
Phase Contrast ◽  
High Energy ◽  
Protein Crystals ◽  
Cubic Phase ◽  
Macromolecular Crystallography ◽  
X Ray ◽  
X Ray Imaging

For the extraction of the best possible X-ray diffraction data from macromolecular crystals, accurate positioning of the crystals with respect to the X-ray beam is crucial. In addition, information about the shape and internal defects of crystals allows the optimization of data-collection strategies. Here, it is demonstrated that the X-ray beam available on the macromolecular crystallography beamline P14 at the high-brilliance synchrotron-radiation source PETRA III at DESY, Hamburg, Germany can be used for high-energy phase-contrast microtomography of protein crystals mounted in an optically opaque lipidic cubic phase matrix. Three-dimensional tomograms have been obtained at X-ray doses that are substantially smaller and on time scales that are substantially shorter than those used for diffraction-scanning approaches that display protein crystals at micrometre resolution. Adding a compound refractive lens as an objective to the imaging setup, two-dimensional imaging at sub-micrometre resolution has been achieved. All experiments were performed on a standard macromolecular crystallography beamline and are compatible with standard diffraction data-collection workflows and apparatus. Phase-contrast X-ray imaging of macromolecular crystals could find wide application at existing and upcoming low-emittance synchrotron-radiation sources.

scholarly journals Visualisation of membrane protein crystals using X-ray imaging

2014 ◽  
Vol 70 (a1) ◽  
pp. C351-C351
Author(s):  
Anna Warren ◽  
Wes Armour ◽  
Danny Axford ◽  
Mark Basham ◽  
Thomas Connolley ◽  
...  
Keyword(s):  
Data Collection ◽  
Diffraction Data ◽  
Cubic Phase ◽  
Informed Decision Making ◽  
Macromolecular Crystallography ◽  
X Ray Diffraction ◽  
Shape Estimation ◽  
X Ray ◽  
Raster Scanning ◽  
X Ray Imaging

The focus in macromolecular crystallography is moving towards even more challenging target proteins that often crystallise on much smaller scales and are frequently mounted in opaque or highly refractive materials.[1,2] It is therefore essential that X-ray beamline technology develops in parallel to accommodate such difficult samples. In this poster the use of X-ray microradiography and microtomography is reported as a tool for crystal visualisation, location and characterization on the macromolecular crystallography beamlines at the Diamond Light Source. The technique is particularly useful for microcrystals, and crystals mounted in opaque materials such as lipidic cubic phase. X-ray diffraction raster scanning can be used in combination with radiography to allow informed decision-making at the beamline prior to diffraction data collection. It is demonstrated that the X-ray dose required for a full tomography measurement is similar to a diffraction grid scan. However, for sample location and shape estimation alone, just a few radiographic projections may be required; hence reducing the dose the crystals will be exposed to prior to the diffraction data collection.[3]

scholarly journals DIALS – a toolbox for diffraction data analysis

2014 ◽  
Vol 70 (a1) ◽  
pp. C1440-C1440 ◽  
Author(s):  
Luis Fuentes-Montero ◽  
James Parkhurst ◽  
Graeme Winter ◽  
David Waterman ◽  
Richard Gildea ◽  
...  
Keyword(s):  
Data Analysis ◽  
Open Source Software ◽  
Diffraction Data ◽  
Three Dimensional ◽  
Macromolecular Crystallography ◽  
X Ray Diffraction ◽  
X Ray ◽  
New Methods ◽  
Software Toolbox ◽  
Initial Focus

DIALS is a collaborative initiative to produce an open source software toolbox encompassing all aspects of diffraction data analysis, with an initial focus on X-ray diffraction data from synchrotrons and free-electron lasers for macromolecular crystallography. DIALS [1] has been developed as a modular plug-in framework that permits flexibility not only in the development of new methods and algorithms but also in the application of these methods to data analysis. DIALS builds on the cctbx [2] in addition to its own dedicated tool-kits. We will present the ideas behind DIALS and give examples of its versatility in permitting the use of several spot-finding and indexing schemes, global refinement and both two and three dimensional integration methods.

Design of a novel Peltier-based cooling device and its use in neutron diffraction data collection of perdeuterated yeast pyrophosphatase

2010 ◽  
Vol 43 (5) ◽  
pp. 1113-1120 ◽  
Author(s):  
Esko Oksanen ◽  
François Dauvergne ◽  
Adrian Goldman ◽  
Monika Budayova-Spano
Keyword(s):  
Data Collection ◽  
Neutron Diffraction ◽  
Diffraction Data ◽  
Catalytic Mechanism ◽  
Inorganic Pyrophosphatase ◽  
Neutron Diffraction Data ◽  
Cooling Device ◽  
Data Set ◽  
X Ray ◽  
X Ray Crystallography

H atoms play a central role in enzymatic mechanisms, but H-atom positions cannot generally be determined by X-ray crystallography. Neutron crystallography, on the other hand, can be used to determine H-atom positions but it is experimentally very challenging. Yeast inorganic pyrophosphatase (PPase) is an essential enzyme that has been studied extensively by X-ray crystallography, yet the details of the catalytic mechanism remain incompletely understood. The temperature instability of PPase crystals has in the past prevented the collection of a neutron diffraction data set. This paper reports how the crystal growth has been optimized in temperature-controlled conditions. To stabilize the crystals during neutron data collection a Peltier cooling device that minimizes the temperature gradient along the capillary has been developed. This device allowed the collection of a full neutron diffraction data set.

2D X-ray diffraction and molecular modelling of the crystalline structure of polyesters under uniaxial stress

2021 ◽  
pp. 096739112199822
Author(s):  
Ahmed I Abou-Kandil ◽  
Gerhard Goldbeck
Keyword(s):  
Crystalline Structure ◽  
Molecular Modelling ◽  
Three Dimensional ◽  
Uniaxial Stress ◽  
X Ray Diffraction ◽  
X Ray ◽  
Wide Range ◽  
Modelling Techniques ◽  
Diffraction Patterns

Studying the crystalline structure of uniaxially and biaxially drawn polyesters is of great importance due to their wide range of applications. In this study, we shed some light on the behaviour of PET and PEN under uniaxial stress using experimental and molecular modelling techniques. Comparing experiment with modelling provides insights into polymer crystallisation with extended chains. Experimental x-ray diffraction patterns are reproduced by means of models of chains sliding along the c-axis leading to some loss of three-dimensional order, i.e. moving away from the condition of perfect register of the fully extended chains in triclinic crystals of both PET and PEN. This will help us understand the mechanism of polymer crystallisation under uniaxial stress and the appearance of mesophases in some cases as discussed herein.

scholarly journals Temperature dependence of amorphous magnesium carbonate structure studied by PDF and XAFS analyses

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Gen-ichiro Yamamoto ◽  
Atsushi Kyono ◽  
Satoru Okada
Keyword(s):  
Temperature Dependence ◽  
Three Dimensional ◽  
Magnesium Carbonate ◽  
Range Order ◽  
Edge Structure ◽  
Medium Range Order ◽  
X Ray ◽  
Medium Range ◽  
Mineral Trapping ◽  
X Ray Absorption

AbstractMineral trapping through the precipitation of carbonate minerals is a potential approach to reduce CO2 accumulation in the atmosphere. The temperature dependence of amorphous magnesium carbonate (AMC), a precursor of crystalline magnesium carbonate hydrates, was investigated using synchrotron X-ray scattering experiments with atomic pair distribution function (PDF) and X-ray absorption fine structure analysis. PDF analysis revealed that there were no substantial structural differences among the AMC samples synthesized at 20, 60, and 80 °C. In addition, the medium-range order of all three AMC samples was very similar to that of hydromagnesite. Stirring in aqueous solution at room temperature caused the AMC sample to hydrate immediately and form a three-dimensional hydrogen-bonding network. Consequently, it crystallized with the long-range structural order of nesquehonite. The Mg K-edge X-ray absorption near-edge structure spectrum of AMC prepared at 20 °C was very similar to that of nesquehonite, implying that the electronic structure and coordination geometry of Mg atoms in AMC synthesized at 20 °C are highly similar to those in nesquehonite. Therefore, the short-range order (coordination environment) around the Mg atoms was slightly modified with temperature, but the medium-range order of AMC remained unchanged between 20 and 80 °C.

Sign in / Sign up

Export Citation Format

Share Document