scholarly journals Microtubule architecture in vitro and in cells revealed by cryo-electron tomography

2018 ◽  
Vol 74 (6) ◽  
pp. 572-584 ◽  
Author(s):  
Joseph Atherton ◽  
Melissa Stouffer ◽  
Fiona Francis ◽  
Carolyn A. Moores
Keyword(s):  
Molecular Motors ◽  
Electron Tomography ◽  
Three Dimensional ◽  
Structural Heterogeneity ◽  
Dimensional Structure ◽  
Cellular Functions ◽  
Cellular Processes ◽  
Cryo Electron Tomography ◽  
In Cells

The microtubule cytoskeleton is involved in many vital cellular processes. Microtubules act as tracks for molecular motors, and their polymerization and depolymerization can be harnessed to generate force. The structures of microtubules provide key information about the mechanisms by which their cellular roles are accomplished and the physiological context in which these roles are performed. Cryo-electron microscopy allows the visualization of in vitro-polymerized microtubules and has provided important insights into their overall morphology and the influence of a range of factors on their structure and dynamics. Cryo-electron tomography can be used to determine the unique three-dimensional structure of individual microtubules and their ends. Here, a previous cryo-electron tomography study of in vitro-polymerized GMPCPP-stabilized microtubules is revisited, the findings are compared with new tomograms of dynamic in vitro and cellular microtubules, and the information that can be extracted from such data is highlighted. The analysis shows the surprising structural heterogeneity of in vitro-polymerized microtubules. Lattice defects can be observed both in vitro and in cells. The shared ultrastructural properties in these different populations emphasize the relevance of three-dimensional structures of in vitro microtubules for understanding microtubule cellular functions.

scholarly journals A guided approach for subtomogram averaging of challenging macromolecular assemblies

2020 ◽  
Author(s):  
Danielle Grotjahn ◽  
Saikat Chowdhury ◽  
Gabriel C. Lander
Keyword(s):  
Electron Tomography ◽  
A Priori ◽  
Three Dimensional ◽  
Structural Heterogeneity ◽  
Dimensional Structure ◽  
Diverse Range ◽  
Macromolecular Assemblies ◽  
Cryo Electron Tomography ◽  
Subtomogram Averaging

AbstractCryo-electron tomography is a powerful biophysical technique enabling three-dimensional visualization of complex biological systems. Macromolecular targets of interest identified within cryo-tomograms can be computationally extracted, aligned, and averaged to produce a better-resolved structure through a process called subtomogram averaging (STA). However, accurate alignment of macromolecular machines that exhibit extreme structural heterogeneity and conformational flexibility remains a significant challenge with conventional STA approaches. To expand the applicability of STA to a broader range of pleomorphic complexes, we developed a user-guided, focused refinement approach that can be incorporated into the standard STA workflow to facilitate the robust alignment of particularly challenging samples. We demonstrate that it is possible to align visually recognizable portions of multi-subunit complexes by providing a priori information regarding their relative orientations within cryo-tomograms, and describe how this strategy was applied to successfully elucidate the first three-dimensional structure of the dynein-dynactin motor protein complex bound to microtubules. Our approach expands the application of STA for solving a more diverse range of heterogeneous biological structures, and establishes a conceptual framework for the development of automated strategies to deconvolve the complexity of crowded cellular environments and improve in situ structure determination technologies.

scholarly journals Cryo-Electron Tomography Reveals the Comparative Three-Dimensional Architecture of Prochlorococcus, a Globally Important Marine Cyanobacterium

2007 ◽  
Vol 189 (12) ◽  
pp. 4485-4493 ◽  
Author(s):  
Claire S. Ting ◽  
Chyongere Hsieh ◽  
Sesh Sundararaman ◽  
Carmen Mannella ◽  
Michael Marko
Keyword(s):  
Cell Wall ◽  
Electron Tomography ◽  
Three Dimensional ◽  
Membrane System ◽  
Niche Differentiation ◽  
Dimensional Structure ◽  
Comparative Genomic ◽  
Photosynthetic Membrane ◽  
Peptidoglycan Biosynthesis ◽  
Cryo Electron Tomography

ABSTRACT In an age of comparative microbial genomics, knowledge of the near-native architecture of microorganisms is essential for achieving an integrative understanding of physiology and function. We characterized and compared the three-dimensional architecture of the ecologically important cyanobacterium Prochlorococcus in a near-native state using cryo-electron tomography and found that closely related strains have diverged substantially in cellular organization and structure. By visualizing native, hydrated structures within cells, we discovered that the MED4 strain, which possesses one of the smallest genomes (1.66 Mbp) of any known photosynthetic organism, has evolved a comparatively streamlined cellular architecture. This strain possesses a smaller cell volume, an attenuated cell wall, and less extensive intracytoplasmic (photosynthetic) membrane system compared to the more deeply branched MIT9313 strain. Comparative genomic analyses indicate that differences have evolved in key structural genes, including those encoding enzymes involved in cell wall peptidoglycan biosynthesis. Although both strains possess carboxysomes that are polygonal and cluster in the central cytoplasm, the carboxysomes of MED4 are smaller. A streamlined cellular structure could be advantageous to microorganisms thriving in the low-nutrient conditions characteristic of large regions of the open ocean and thus have consequences for ecological niche differentiation. Through cryo-electron tomography we visualized, for the first time, the three-dimensional structure of the extensive network of photosynthetic lamellae within Prochlorococcus and the potential pathways for intracellular and intermembrane movement of molecules. Comparative information on the near-native structure of microorganisms is an important and necessary component of exploring microbial diversity and understanding its consequences for function and ecology.

scholarly journals Analysis of the cross-reactivity and of the 1.5 Å crystal structure of the Malassezia sympodialis Mala s 6 allergen, a member of the cyclophilin pan-allergen family

2006 ◽  
Vol 396 (1) ◽  
pp. 41-49 ◽  
Author(s):  
Andreas G. Glaser ◽  
Andreas Limacher ◽  
Sabine Flückiger ◽  
Annika Scheynius ◽  
Leonardo Scapozza ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Three Dimensional ◽  
Cross Reactivity ◽  
Dimensional Structure ◽  
Cellular Functions ◽  
Human Proteins ◽  
Ige Mediated ◽  
Unit Cell Dimensions

Cyclophilins constitute a family of proteins involved in many essential cellular functions. They have also been identified as a panallergen family able to elicit IgE-mediated hypersensitivity reactions. Moreover, it has been shown that human cyclophilins are recognized by serum IgE from patients sensitized to environmental cyclophilins. IgE-mediated autoreactivity to self-antigens that have similarity to environmental allergens is often observed in atopic disorders. Therefore comparison of the crystal structure of human proteins with similarity to allergens should allow the identification of structural similarities to rationally explain autoreactivity. A new cyclophilin from Aspergillus fumigatus (Asp f 27) has been cloned, expressed and showed to exhibit cross-reactivity in vitro and in vivo. The three-dimensional structure of cyclophilin from the yeast Malassezia sympodialis (Mala s 6) has been determined at 1.5 Å (1 Å=0.1 nm) by X-ray diffraction. Crystals belong to space group P41212 with unit cell dimensions of a=b=71.99 Å and c=106.18 Å. The structure was solved by molecular replacement using the structure of human cyclophilin A as the search model. The refined structure includes all 162 amino acids of Mala s 6, an active-site-bound Ala-Pro dipeptide and 173 water molecules, with a crystallographic R- and free R-factor of 14.3% and 14.9% respectively. The overall structure consists of an eight-stranded antiparallel β-barrel and two α-helices covering the top and bottom of the barrel, typical for cyclophilins. We identified conserved solvent-exposed residues in the fungal and human structures that are potentially involved in the IgE-mediated cross-reactivity.

scholarly journals Molecular architecture of inner dynein arms in situ in Chlamydomonas reinhardtii flagella

2008 ◽  
Vol 183 (5) ◽  
pp. 923-932 ◽  
Author(s):  
Khanh Huy Bui ◽  
Hitoshi Sakakibara ◽  
Tandis Movassagh ◽  
Kazuhiro Oiwa ◽  
Takashi Ishikawa
Keyword(s):  
Chlamydomonas Reinhardtii ◽  
Electron Tomography ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Molecular Architecture ◽  
Heavy Chains ◽  
Distal Side ◽  
Cryo Electron Tomography ◽  
Dynein Arms

The inner dynein arm regulates axonemal bending motion in eukaryotes. We used cryo-electron tomography to reconstruct the three-dimensional structure of inner dynein arms from Chlamydomonas reinhardtii. All the eight different heavy chains were identified in one 96-nm periodic repeat, as expected from previous biochemical studies. Based on mutants, we identified the positions of the AAA rings and the N-terminal tails of all the eight heavy chains. The dynein f dimer is located close to the surface of the A-microtubule, whereas the other six heavy chain rings are roughly colinear at a larger distance to form three dyads. Each dyad consists of two heavy chains and has a corresponding radial spoke or a similar feature. In each of the six heavy chains (dynein a, b, c, d, e, and g), the N-terminal tail extends from the distal side of the ring. To interact with the B-microtubule through stalks, the inner-arm dyneins must have either different handedness or, more probably, the opposite orientation of the AAA rings compared with the outer-arm dyneins.

Unfolding single RNA molecules: bridging the gap between equilibrium and non-equilibrium statistical thermodynamics

2005 ◽  
Vol 38 (4) ◽  
pp. 291-301 ◽  
Author(s):  
Carlos Bustamante
Keyword(s):  
Single Molecule ◽  
Molecular Motors ◽  
Biological Systems ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Fluctuation Theorems ◽  
Rna Molecules ◽  
The Times ◽  
Non Equilibrium

During the last 15 years, scientists have developed methods that permit the direct mechanical manipulation of individual molecules. Using this approach, they have begun to investigate the effect of force and torque in chemical and biochemical reactions. These studies span from the study of the mechanical properties of macromolecules, to the characterization of molecular motors, to the mechanical unfolding of individual proteins and RNA. Here I present a review of some of our most recent results using mechanical force to unfold individual molecules of RNA. These studies make it possible to follow in real time the trajectory of each molecule as it unfolds and characterize the various intermediates of the reaction. Moreover, if the process takes place reversibly it is possible to extract both kinetic and thermodynamic information from these experiments at the same time that we characterize the forces that maintain the three-dimensional structure of the molecule in solution. These studies bring us closer to the biological unfolding processes in the cell as they simulate in vitro, the mechanical unfolding of RNAs carried out in the cell by helicases. If the unfolding process occurs irreversibly, I show here that single-molecule experiments can still provide equilibrium, thermodynamic information from non-equilibrium data by using recently discovered fluctuation theorems. Such theorems represent a bridge between equilibrium and non-equilibrium statistical mechanics. In fact, first derived in 1997, the first experimental demonstration of the validity of fluctuation theorems was obtained by unfolding mechanically a single molecule of RNA. It is perhaps a sign of the times that important physical results are these days used to extract information about biological systems and that biological systems are being used to test and confirm fundamental new laws in physics.

scholarly journals Current data processing strategies for cryo-electron tomography and subtomogram averaging

2021 ◽  
Vol 478 (10) ◽  
pp. 1827-1845
Author(s):  
Euan Pyle ◽  
Giulia Zanetti
Keyword(s):  
Data Processing ◽  
Electron Tomography ◽  
Signal To Noise Ratio ◽  
Three Dimensional ◽  
Current Data ◽  
Processing Strategies ◽  
Cryo Electron Tomography ◽  
Subtomogram Averaging ◽  
The Individual

Cryo-electron tomography (cryo-ET) can be used to reconstruct three-dimensional (3D) volumes, or tomograms, from a series of tilted two-dimensional images of biological objects in their near-native states in situ or in vitro. 3D subvolumes, or subtomograms, containing particles of interest can be extracted from tomograms, aligned, and averaged in a process called subtomogram averaging (STA). STA overcomes the low signal to noise ratio within the individual subtomograms to generate structures of the particle(s) of interest. In recent years, cryo-ET with STA has increasingly been capable of reaching subnanometer resolution due to improvements in microscope hardware and data processing strategies. There has also been an increase in the number and quality of software packages available to process cryo-ET data with STA. In this review, we describe and assess the data processing strategies available for cryo-ET data and highlight the recent software developments which have enabled the extraction of high-resolution information from cryo-ET datasets.

scholarly journals Detailed structural and biochemical characterization of the nexin-dynein regulatory complex

2015 ◽  
Vol 26 (2) ◽  
pp. 294-304 ◽  
Author(s):  
Toshiyuki Oda ◽  
Haruaki Yanagisawa ◽  
Masahide Kikkawa
Keyword(s):  
Biochemical Characterization ◽  
Electron Tomography ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Dynein Motor ◽  
Cryo Electron Tomography ◽  
Regulatory Complex ◽  
And Function

The nexin-dynein regulatory complex (N-DRC) forms a cross-bridge between the outer doublet microtubules of the axoneme and regulates dynein motor activity in cilia/flagella. Although the molecular composition and the three-dimensional structure of N-DRC have been studied using mutant strains lacking N-DRC subunits, more accurate approaches are necessary to characterize the structure and function of N-DRC. In this study, we precisely localized DRC1, DRC2, and DRC4 using cryo–electron tomography and structural labeling. All three N-DRC subunits had elongated conformations and spanned the length of N-DRC. Furthermore, we purified N-DRC and characterized its microtubule-binding properties. Purified N-DRC bound to the microtubule and partially inhibited microtubule sliding driven by the outer dynein arms (ODAs). Of interest, microtubule sliding was observed even in the presence of fourfold molar excess of N-DRC relative to ODA. These results provide insights into the role of N-DRC in generating the beating motions of cilia/flagella.

scholarly journals Three-dimensional structure of the radial spokes reveals heterogeneity and interactions with dyneins in Chlamydomonas flagella

2012 ◽  
Vol 23 (1) ◽  
pp. 111-120 ◽  
Author(s):  
Cynthia F. Barber ◽  
Thomas Heuser ◽  
Blanca I. Carbajal-González ◽  
Vladimir V. Botchkarev ◽  
Daniela Nicastro
Keyword(s):  
Electron Tomography ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Flagellar Motility ◽  
Three Dimensional Structure ◽  
Radial Spoke ◽  
Cryo Electron Tomography ◽  
Radial Spokes ◽  
Axonemal Dynein ◽  
Subtomogram Averaging

Radial spokes (RSs) play an essential role in the regulation of axonemal dynein activity and thus of ciliary and flagellar motility. However, few details are known about the complexes involved. Using cryo–electron tomography and subtomogram averaging, we visualized the three-dimensional structure of the radial spokes in Chlamydomonas flagella in unprecedented detail. Unlike many other species, Chlamydomonas has only two spokes per axonemal repeat, RS1 and RS2. Our data revealed previously uncharacterized features, including two-pronged spoke bases that facilitate docking to the doublet microtubules, and that inner dyneins connect directly to the spokes. Structures of wild type and the headless spoke mutant pf17 were compared to define the morphology and boundaries of the head, including a direct RS1-to-RS2 interaction. Although the overall structures of the spokes are very similar, we also observed some differences, corroborating recent findings about heterogeneity in the docking of RS1 and RS2. In place of a third radial spoke we found an uncharacterized, shorter electron density named “radial spoke 3 stand-in,” which structurally bears no resemblance to RS1 and RS2 and is unaltered in the pf17 mutant. These findings demonstrate that radial spokes are heterogeneous in structure and may play functionally distinct roles in axoneme regulation.

scholarly journals Structural heterogeneity of the microtubule lattice

2021 ◽  
Author(s):  
Charlotte Guyomar ◽  
Siou Ku ◽  
John Heumann ◽  
Clément Bousquet ◽  
Gabriel Guilloux ◽  
...  
Keyword(s):  
Electron Tomography ◽  
Intrinsic Property ◽  
Structural Heterogeneity ◽  
Kinesin Motor ◽  
Tubulin Subunit ◽  
Cryo Electron Tomography ◽  
Egg Extracts ◽  
Xenopus Egg ◽  
Xenopus Egg Extracts

Microtubules are polymers assembled from tubulin α-β-heterodimers. They typically display lateral α-α and β-β-homotypic interactions, except at one region, called the seam, where heterotypic α-β and β-α interactions occur. Here, we decorated microtubules assembled in vitro or in cytoplasmic Xenopus egg extracts with kinesin-motor domains, and analyzed their lattice organization using dual axis cryo-electron tomography followed by segmented sub-tomogram averaging. In both conditions, microtubules incorporated variable protofilament and/or tubulin subunit helix start numbers. While microtubules assembled in vitro displayed variable numbers of seams, those assembled in extracts displayed preferentially one seam. The seam location varied within individual microtubules implying the presence of lattice holes. Thus, the formation of discontinuous microtubule lattices is an intrinsic property of tubulin assembly, a process that is controlled in cells.

Sign in / Sign up

Export Citation Format

Share Document