Empirical investigation of the applicability of constructability methods to prevent design errors

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Gabriel Raviv ◽  
Aviad Shapira ◽  
Rafael Sacks
Keyword(s):  
Construction Projects ◽  
Comparative Case Study ◽  
Design Quality ◽  
Content Type ◽  
Construction Companies ◽  
Failure Data ◽  
Causal Connections ◽  
Specific Project ◽  
General Tool

PurposeThe paper aims to identify the effective constructability methods and tools that should be applied during the early project design stages to prevent specific constructability failures regarding project context.Design/methodology/approachSeventeen basic constructability problems were defined, 12 constructability implementation methods for investigation were selected, and a general tool representing potential causal connections between the problems and the methods that could prevent them was developed. A comparative case study was conducted through a rigorous investigation of the construction documentation of four major building construction projects. Nearly four hundred constructability problems were identified. The tool developed was used to draw conclusions about the preferred constructability methods, in general, and with respect to specific project contexts.FindingsThe managerial approach offers the best methods for preventing constructability problems. The major methods that emerged were (1) assigning a constructability champion, (2) facilitating the involvement of the general contractor early in the design process, and (3) augmenting design quality control. At the other end of the scale, methods such as company procedures and owner involvement were found to be the least effective.Originality/valueThe paper offers the ability to relate constructability problems to preventive mechanisms and to identify the appropriate steps to be taken to resolve these problems. The mechanism described here can be used by construction companies that keep failure data within accounting files to check projects in retrospect and draw lessons from them to be implemented in future projects.

Maintaining focus on clients’ requirements using the DQI tool

2017 ◽  
Vol 7 (3) ◽  
pp. 271-283 ◽  
Author(s):  
John M. Kamara
Keyword(s):  
Construction Projects ◽  
Design Quality ◽  
Building Projects ◽  
Content Type ◽  
Case Study Analysis ◽  
The Many ◽  
Stakeholder Requirements ◽  
Project Lifecycle ◽  
Further Development

Purpose The purpose of this paper is to explore the contribution of the design quality indicator (DQI) tool in the management of client requirements in construction projects, and propose a requirements-oriented project process (ROPP) to ensure continued focus on client requirements throughout the lifecycle of a project. Design/methodology/approach Direct participant involvement and case studies of building projects that have used the DQI tool are used to analyse the extent to which DQI contributes to the management of client requirements. Findings Case study analysis suggests that the DQI enhances focus on client and project stakeholder requirements through the initial quality aspirations set out at the beginning of a project, but it is limited in its scope to address a more comprehensive requirements profile. Research limitations/implications The proposed ROPP model is conceptual and requires further development to test its effectiveness in enhancing focus on client requirements. However, given current developments in automated checking in BIM and other environments, this offers scope for further research in this area. Originality/value Maintaining focus on client requirements throughout the process is a key criterion for project success. However, given the many stakeholders involved, and the progressive translation into various project documents, there is a risk that focus on the original/evolving requirements of the client can be lost. Current approaches such as the DQI have limitations and a robust ROPP is, therefore, a key contribution to securing clients’ objectives over the project lifecycle.

Managing integration in infrastructure alliance projects

2017 ◽  
Vol 10 (1) ◽  
pp. 5-31 ◽  
Author(s):  
Anna-Maija Hietajärvi ◽  
Kirsi Aaltonen ◽  
Harri Haapasalo
Keyword(s):  
Construction Projects ◽  
Research Approach ◽  
Content Type ◽  
Complex Projects ◽  
Wide Range ◽  
Project Organizations ◽  
Integration Mechanisms ◽  
Organizational Integration ◽  
Time Critical

Purpose The effective management of inter-organizational integration is central to complex projects. Such projects pose significant challenges for integration, as organizations struggle with constantly changing inter-organizational interdependencies and must develop and adapt integration mechanisms to meet new demands. The purpose of this paper is to understand what kinds of integration mechanisms are used and how they are developed and adjusted during the infrastructure alliance projects. Design/methodology/approach This study provides empirical evidence of integration dynamics in project alliancing by analyzing two infrastructure alliance projects – a complex tunnel construction project and a railway renovation project. The research approach is an inductive case study. Findings This paper identifies integration mechanisms adopted in two case projects and three central triggers that led to changes in the integration mechanisms: project lifecycle phase, unexpected events and project team’s learning during the project. Practical implications Integration capability should be a precondition for alliance project organizations and requires the adoption of a wide range of integration mechanisms, as well as an ability to adjust those mechanisms in response to everyday dynamics and emergent situations. Originality/value Although unplanned contingencies and the responses to them represent important influences in organizations, there is limited amount of research on the dynamics of integration. The findings will be of value in supporting the management of inter-organizational integration in complex, uncertain and time-critical construction projects.

Asset recovery in corruption cases

2016 ◽  
Vol 19 (1) ◽  
pp. 4-20 ◽  
Author(s):  
Peter Leasure
Keyword(s):  
Vice President ◽  
Comparative Case Study ◽  
Content Type ◽  
Case Study Analysis ◽  
Asset Recovery ◽  
The Us ◽  
Quasi Experimental ◽  
The Usa ◽  
The Republic

Purpose – Asset recovery proceedings increasingly target corrupt foreign officials who acquire lavish assets as a result of capital gained through criminal acts. One extremely difficult issue arising in asset recovery proceedings is whether the capital used to acquire the assets can be traced to a criminal act. The purpose of this paper is to critique US tracing procedure through comparative analysis. Design/methodology/approach – A prominent series of cases brought by the USA and France against assets owned by Teodoro “Teodorín” Nguema Obiang, second Vice President of the Republic of Equatorial Guinea, produced mixed results on the tracing element. This paper utilizes a qualitative comparative case analysis to examine the US and French cases. Findings – The US results reflect serious weaknesses in the US law as compared to more effective French asset recovery procedure. Originality/value – Though this paper is certainly a comparative case study analysis, nearly identical facts and two different jurisdictions reaching separate conclusions bring us in the legal community as close as we can realistically come to quasi-experimental research. Comparative research in this area is severely lacking and sorely needed. The mechanisms identified in the French system clearly show flaws that are present in the US system.

Developing an integrated framework for optimization of spatial requirements of construction equipment

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
S. Hemalattha ◽  
R. Vidjeapriya
Keyword(s):  
Construction Projects ◽  
Indoor Environment ◽  
Outdoor Environment ◽  
Building Information Modelling ◽  
Actual Structure ◽  
Content Type ◽  
Space Planning ◽  
Existing Structures ◽  
Building Information

PurposeThis study aims to develop a framework for optimizing the spatial requirements of the equipment in a construction site using a geographic information system (GIS).Design/methodology/approachAn ongoing construction project, an existing thermal powerplant in India, is considered to be the case study, and the corresponding construction activities were scheduled. The equipment spaces were defined for the scheduled activities in building information modelling (BIM), which was further imported to GIS to define the topology rules, validate and optimize the spatial requirements. The BIM simulates the indoor environment, which includes the actual structure being constructed, and the GIS helps in modelling the outdoor environment, which includes the existing structures, temporary facilitates, topography of the site, etc.; thus, this study incorporates the knowledge of BIM in a geospatial environment to obtain optimized equipment spaces for various activities.FindingsSpace in construction projects is to be considered as a resource as well as a constraint, which is to be modelled and planned according to the requirements. The integration of BIM and GIS for equipment space planning will enable precise identification of the errors in the equipment spaces defined and also result in fewer errors as possible. The integration has also eased the process of assigning the topology rules and validating the same, which otherwise is a tedious process.Originality/valueThe workspace for each activity will include the space of the equipment. But, in most of the previous works of workspace planning, only the labour space is considered, and the conflicts and congestions occurring due to the equipment were neglected. The planning of equipment spaces cannot be done based only on the indoor environment; it has to be carried out by considering the surroundings and topography of the site, which have not been researched extensively despite its importance.

scholarly journals Do entrepreneurial knowledge and innovative attitude overcome “imperfections” in the innovation process? Insights from SMEs in the UK and Italy

2018 ◽  
Vol 22 (8) ◽  
pp. 1637-1654 ◽  
Author(s):  
Antonio Usai ◽  
Veronica Scuotto ◽  
Alan Murray ◽  
Fabio Fiano ◽  
Luca Dezi
Keyword(s):  
Risk Management ◽  
Knowledge Management ◽  
Asymmetric Information ◽  
Innovation Process ◽  
Comparative Case Study ◽  
Management Process ◽  
Content Type ◽  
Entrepreneurial Knowledge ◽  
The Uk

PurposeEntrepreneurial knowledge spurs innovation and, in turn, generates a competitive advantage. This paper aims to explore if entrepreneurial knowledge combined with the attitude to innovate can overcome the key “imperfections” of the innovation process generated by dynamic, current technological progress in the knowledge-intensive sector. The “imperfections” identified in risk management, asymmetric information in the knowledge management process and hold-up problems can all disrupt collaborative partnerships and limit opportunities for innovation.Design/methodology/approachA theory-building approach is applied which offers a case study analysis of two small- to medium-sized enterprises (SMEs). These two SMEs operate in Europe but in two different territories: the UK and Italy. The study explores three key imperfections, risk management, asymmetric information in the knowledge management process and hold-up problems, which occur in the innovation process.FindingsThe entrepreneurs face these imperfections by adopting an open innovation model. Notwithstanding, both entrepreneurs had to deal with all “imperfections”, and their skills, attributes, attitude and aptitude allowed them to grow their business and continually develop new products. Therefore, the imperfections do not limit the innovative capacity of an entrepreneur but rather enhance their challengeable attitude. In this regard, the case studies induce a further analysis on entrepreneurial knowledge intertwined with entrepreneurial risk management and networking skills.Research limitations/implicationsThe empirical significance of the two cases does not allow theorisation. However, this research offers interesting results which can be strengthened by a comparative case study with other countries or deeper investigation by applying a quantitative approach.Originality/valueBy leveraging entrepreneurial knowledge, the imperfections noted in the innovation process can be overcome. Entrepreneurial knowledge is recognised as the main asset of an enterprise if it is combined with external talent or human resources. Entrepreneurs aim to develop innovative approaches and ideas through establishing both formal and informal collaborative partnership relationships which are used thanks to the entrepreneurs’ networking skills, knowledge and abilities.

Causal ascription of rework in building and civil engineering projects

2014 ◽  
Vol 21 (1) ◽  
pp. 111-126 ◽  
Author(s):  
Palaneeswaran Ekambaram ◽  
Peter E.D. Love ◽  
Mohan M. Kumaraswamy ◽  
Thomas S.T. Ng
Keyword(s):  
Construction Projects ◽  
Civil Engineering ◽  
Small Data ◽  
Data Set ◽  
Content Type ◽  
Management Measures ◽  
Significant Difference ◽  
Quantitative Impact ◽  
Engineering Projects

Purpose – Rework is an endemic problem in construction projects and has been identified as being a significant factor contributing cost and schedule overruns. Causal ascription is necessary to obtain knowledge about the underlying nature of rework so that appropriate prevention mechanisms can be put in place. The paper aims to discuss these issues. Design/methodology/approach – Using a supervised questionnaire survey and case-study interviews, data from 112 building and engineering projects about the sources and causes of rework in projects were obtained. A multivariate exploration was conducted to examine the underlying relationships between rework variables. Findings – The analysis revealed that there was a significant difference between rework causes for building and civil engineering projects. The set of associations explored in the analyses will be useful to develop a generic causal model to examine the quantitative impact of rework on project performance so that appropriate prevention strategies can be identified and developed. Research limitations/implications – The limitations include: small data set (112 projects), which include 75 from building and 37 from civil engineering projects. Practical implications – Meaningful insights into the rework occurrences in construction projects will pave pathways for rational mitigation and effective management measures. Originality/value – To date there has been limited empirical research that has sought to determine the causal ascription of rework, particularly in Hong Kong.

scholarly journals Application of BIM and 3D Laser Scanning for Quantity Management in Construction Projects

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Thu Anh Nguyen ◽  
Phong Thanh Nguyen ◽  
Sy Tien Do
Keyword(s):  
Construction Industry ◽  
Construction Projects ◽  
Laser Scanning ◽  
Essential Role ◽  
Industrial Revolution ◽  
Management Process ◽  
3D Laser Scanning ◽  
Economic Sectors ◽  
Construction Companies

The construction industry has played an essential role in the process of modernization and industrialization and it has also been a major factor in determining the development of the infrastructure for other economic sectors. Construction companies consider the measurement of work progress, which often wastes time and has a low resolution, to be one of the most challenging problems faced by project management. Therefore, this research aimed to propose practical solutions by applying recent technological achievements of the 4.0 industrial revolution to improve the efficiency of the quantity management process. By utilizing the advantages and features of a BIM model and 3D laser scanning, this paper proposes that adopting a BIM model and 3D laser scanning has the potential to improve the accuracy and efficiency of the quantity management process. The case study demonstrated some typical tasks to evaluate accuracy and efficiency as well as to showcase the research proposal.

Interconnections between the cultural and creative industries and tourism: challenges in four Ibero-American capital cities

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Claudia Helena Henriques ◽  
Silvina Renee Elias
Keyword(s):  
Buenos Aires ◽  
New Technologies ◽  
Creative Industries ◽  
Comparative Case Study ◽  
Tourism Impacts ◽  
Content Type ◽  
Capital Cities ◽  
Creative Cities ◽  
Cultural And Creative Industries

Purpose This paper aims to investigate the European and Latin America urban cultural policies that could enhance cultural and creative sustainable tourism products development. Design/methodology/approach The methodological framework is based on a comparative case study regarding the importance, dynamics and policies associated to cultural and creative tourism in four Ibero-American cities, namely, Brasilia, Buenos Aires, Lisbon and Madrid. Findings This exploratory analysis underlines the growing importance of cultural and creative tourism in the four capital cities. On one hand, cities reveal different tourism impacts and, on the other hand, they are associated to different cultural and creative sector structures. Cities cultural and creative performance put in evidence that sustainable cities index, global talent competitiveness index and cultural and creative cities monitor, tend to position Madrid in the first place followed by, Lisbon, Buenos Aires and Brasilia. Research limitations/implications In general, and despite the importance of space in the creative process, there is little research on the geography of the creative industries and there is a lack of cross-country comparative studies so that it is difficult to assess the particularities of each model of creativity. Practical implications Cities could enhance more efforts in investing, not only in the traditional cultural infrastructures but also on the new forms of culture, new technologies, new makers, new audiences based on their attributes, activities and labels, in a framework of urban sustainable policies based on “innovation,” “inclusiveness” and “interconnectivity.” Originality/value The originality of the paper lies in the comparative analysis of four cities based on cultural and creative sector and tourism interconnections. Simultaneously, it lies in an exploratory model application.

BIM in the Saudi Arabian construction industry: state of the art, benefit and barriers

2019 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Abdullah Al-Yami ◽  
Muizz O. Sanni-Anibire
Keyword(s):  
Saudi Arabia ◽  
Construction Industry ◽  
Construction Projects ◽  
State Of The Art ◽  
Pilot Project ◽  
Lessons Learned ◽  
Information Modeling ◽  
Perceived Benefits ◽  
Content Type

Purpose Although there is a boom in the construction industry in the Kingdom of Saudi Arabia (KSA), it is yet to fully adopt building information modeling (BIM), which has received a lot of attention in the US, UK and Australian construction industries. Thus, the purpose of this paper is to provide the current state of the art in BIM implementation in Saudi Arabia, as well as perceived benefits and barriers through a case study. Design/methodology/approach A broad overview of BIM, the construction industry in KSA and the research and implementation of BIM in KSA was presented in this study. The research further established the perceived benefits and barriers of BIM implementation through a case study of a local AEC firm. A questionnaire survey was used to obtain lessons learned from the BIM team of the pilot project and was further analyzed using the RII approach. Findings The study’s findings include the lack of policy initiatives in KSA to enforce BIM in the construction industry, as well as the lack of sufficient research in the domain of BIM in KSA. Furthermore, the case study also revealed that the most important benefit of BIM adoption is “detection of inter-disciplinary conflicts in the drawings to reduce error, maintain design intent, control quality and speed up communication,” whereas the most important barrier is “the need for re-engineering many construction projects for successful transition towards BIM.” Originality/value The study provides a background for enhanced research towards the implementation of BIM in Saudi Arabia and also demonstrates the potential benefits and barriers in BIM implementation.

Sign in / Sign up

Export Citation Format

Share Document