Heat transfer modeling within the microclimate between 3D human body and clothing: effects of ventilation openings and fire intensity

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Miao Tian ◽  
Jun Li
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Temperature Distribution ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Human Body ◽  
Thermal Environment ◽  
Heat Transfer Process ◽  
Fire Intensity ◽  
Content Type

PurposeThe purpose of this study is to determine the effect of ventilation openings and fire intensity on heat transfer and fluid flow within the microclimate between 3D human body and clothing.Design/methodology/approachOn account of interaction effects of fire and ventilation openings on heat transfer process, a 3D transient computational fluid dynamics model considering the real shape of human body and clothing was developed. The model was validated by comparing heat flux history and distribution with experimental results. Heat transfer modes and fluid flow were investigated under three levels of fire intensity for the microclimate with ventilation openings and closures.FindingsTemperature distribution on skin surface with open microclimate was heavily depended on the heat transfer through ventilation openings. Higher temperature for the clothing with confined microclimate was affected by the position and direction of flames injection. The presence of openings contributed to the greater velocity at forearms, shanks and around neck, which enhanced the convective heat transfer within microclimate. Thermal radiation was the dominant heat transfer mode within the microclimate for garment with closures. On the contrary, convective heat transfer within microclimate for clothing with openings cannot be neglected.Practical implicationsThe findings provided fundamental supports for the ease and pattern design of the improved thermal protective systems, so as to realize the optimal thermal insulation of the microclimate on the garment level in the future.Originality/valueThe outcomes broaden the insights of results obtained from the mesoscale models. Different high skin temperature distribution and heat transfer modes caused by thermal environment and clothing structure provide basis for advanced thermal protective clothing design.

Cooling of an isothermal surface having a cavity component by using CuO-water nano-jet

2019 ◽  
Vol 30 (4) ◽  
pp. 2169-2191 ◽  
Author(s):  
Fatih Selimefendigil ◽  
Ali J. Chamkha
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Average Nusselt Number ◽  
Jet Impingement ◽  
Content Type ◽  
Impingement Cooling ◽  
Isothermal Surface

Purpose The purpose of this study is to numerically analyze the convective heat transfer features for cooling of an isothermal surface with a cavity-like portion by using CuO-water nano jet. Jet impingement cooling of curved surfaces plays an important role in practical applications. As compared to flat surfaces, fluid flow and convective heat transfer features with jet impingement cooling of a curved surface becomes more complex with additional formation of the vortices and their interaction in the jet wall region. As flow separation and reattachment may appear in a wide range of thermal engineering applications such as electronic cooling, combustors and solar power, jet impingement cooling of a surface which has a geometry with potential separation regions is important from the practical point of view. Design/methodology/approach Numerical simulations were performed with a finite volume-based solver. The study was performed for various values of the Reynolds number (between 100 and 400), length of the cavity (between 5 w and 40 w), height of the cavity (between w and 5w) and solid nano-particle volume fraction (between 0 and 4 per cent). Artificial neural network modeling was used to obtain a correlation for the average Nusselt number, which can be used to obtain fast and accurate predictions. Findings It was observed that cavity geometrical parameters of the cooling surface can be adjusted to change the flow field and convective heat transfer features. When the cavity length is low, significant contribution of the inclined wall of the cavity on the average Nusselt number is achieved. As the cavity length and height increase, the average Nusselt number, respectively, reduce and slightly enhance. At the highest value of cavity height, significant changes in the convective flow features are obtained. By using nanofluids instead of water, enhancement of average heat transfer in the range of 35-46 per cent is obtained at the highest particle volume fraction. Originality/value In this study, jet impingement cooling of an isothermal surface which has a cavity-like portion was considered with nanofluids. Addition of this portion to the impingement surface has the potential to produce additional vortices which affects the fluid flow and convective features in the jet impingement heat transfer. This geometry has the forward-facing step for the wall jet region with flow separation reattachment in the region. Based on the above literature survey and to the best of the authors’ knowledge, jet impingement cooling for such a geometry has never been reported in the literature despite its importance in practical thermal engineering applications. The results of this study may be useful for design and optimization of such systems and to obtain best performance in terms of fluid flow and heat transfer characteristics.

Fluid flow and convective heat transfer in flat microchannels

2009 ◽  
Vol 52 (5-6) ◽  
pp. 1337-1352 ◽  
Author(s):  
Omar Mokrani ◽  
Brahim Bourouga ◽  
Cathy Castelain ◽  
Hassan Peerhossaini
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Convective Heat Transfer ◽  
Convective Heat

A computational analysis on convective heat transfer for impinging slot nanojets onto a moving hot body

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Hakan Coşanay ◽  
Hakan F. Oztop ◽  
Fatih Selimefendigil
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Unsteady Flow ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Computational Analysis ◽  
Impinging Jets ◽  
Content Type ◽  
Moving Body ◽  
Flow Effects

Purpose The purpose of this study is to perform computational analysis on the steady flow and heat transfer due to a slot nanojet impingement onto a heated moving body. The object is moving at constant speed and nanoparticle is included in the heat transfer fluid. The unsteady flow effects and interactions of multiple impinging jets are also considered. Design/methodology/approach The finite volume method was used as the solver in the numerical simulation. The movement of the hot body in the channel is also considered. Influence of various pertinent parameters such as Reynolds number, jet to target surface spacing and solid nanoparticle volume fraction on the convective heat transfer characteristics are numerically studied in the transient regime. Findings It is found that the flow field and heat transfer becomes very complicated due to the interaction of multiple impinging jets with the movement of the hot body in the channel. Higher heat transfer rates are achieved with higher values of Reynolds number while the inclusion of nanoparticles resulted in a small impact on flow friction. The middle jet was found to play an important role in the heat transfer behavior while jet and moving body temperatures become equal after t = 80. Originality/value Even though some studies exist for the application of jet impingement heat transfer for a moving plate, the configuration with a solid moving hot body on a moving belt under the impacts of unsteady flow effects and interactions of multiple impinging jets have never been considered. The results of the present study will be helpful in the design and optimization of various systems related to convective drying of products, metal processing industry, thermal management in electronic cooling and many other systems.

scholarly journals Thermal-Structural Design of Actively-Cooled Panels Reinforced by Light-Weight Truss Cores

2013 ◽  
Author(s):  
Hongwei Song ◽  
Mingjun Li ◽  
Chenguang Huang ◽  
Xi Wang
Keyword(s):  
Heat Transfer ◽  
Structural Analysis ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Thermal Environment ◽  
Numerical Models ◽  
Lightweight Design ◽  
Optimization Procedure ◽  
Combustion Gas ◽  
Design Variables

This paper focuses on thermal-structural analysis and lightweight design of actively-cooled panels reinforced by low density lattice-framed material (LFM) truss cores. Numerical models for actively-cooled panels are built up with parametric codes to perform the coupled thermal-structural analysis, considering the internal thermal environment of convective heat transfer in the combustor and convective heat transfer in the cooling channel, and internal pressures from the combustion gas and the coolant. A preliminary comparison of the LFM truss reinforced actively-cooled panel and the non-reinforced panel demonstrates that the thermal-structural behavior is significantly improved. Then, an optimization procedure is carried out to find the lightest design while satisfying thermal deformation and plastic strain constraints, with thicknesses of face sheets and topology parameters of LFM truss as design variables. The optimization result demonstrates that, compared with the non-reinforced actively-cooled panels, weight reduction for the panel reinforced by LFM truss may reach 19.6%. We have also fabricated this type of actively-cooled panel in the laboratory level, and the specimen shows good mechanical behaviors.

Sign in / Sign up

Export Citation Format

Share Document