Indirect implementations of sliding-mode control law in buck-type converters

Author(s):  
V.M. Nguyen ◽  
C.Q. Lee
2014 ◽  
Vol 971-973 ◽  
pp. 714-717 ◽  
Author(s):  
Xiang Shi ◽  
Zhe Xu ◽  
Qing Yi He ◽  
Ka Tian

To control wheeled inverted pendulum is a good way to test all kinds of theories of control. The control law is designed, and it based on the collaborative simulation of MATLAB and ADAMS is used to control wheeled inverted pendulum. Then, with own design of hardware and software of control system, sliding mode control is used to wheeled inverted pendulum, and the experimental results of it indicate short adjusting time, the small overshoot and high performance.


Author(s):  
Yohan Díaz-Méndez ◽  
Leandro Diniz de Jesus ◽  
Marcelo Santiago de Sousa ◽  
Sebastião Simões Cunha ◽  
Alexandre Brandão Ramos

Sliding mode control (SMC) is a widely used control law for quadrotor regulation and tracking control problems. The purpose of this article is to solve the tracking problem of quadrotors using a relatively novel nonlinear control law based on SMC that makes use of a conditional integrator. It is demonstrated by a motivation example that the proposed control law can improve the transient response and chattering shortcomings of the previous approaches of similar SMC based controllers. The adopted Newton–Euler model of quadrotor dynamics and controller design is treated separately in two subsystems: attitude and position control loops. The stability of the control technique is demonstrated by Lyapunov’s analysis and the effectiveness and performance of the proposed method are compared with a similar integral law, also based on SMC, and validated by tracking control problems using numerical simulations. Simulations were developed in the presence of external disturbances in order to evaluate the controller robustness. The effectiveness of the proposed controller was verified by performance indexes, demonstrating less accumulated tracking errors and control activity and improvement in the transient response and disturbance rejection when compared to a conventional integrator sliding mode controller.


2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Jeang-Lin Chang

For a class of linear MIMO uncertain systems, a dynamic sliding mode control algorithm that avoids the chattering problem is proposed in this paper. Without using any differentiator, we develop a modified asymptotically stable second-order sliding mode control law in which the proposed controller can guarantee the finite time convergence to the sliding mode and can show that the system states asymptotically approach to zero. Finally, a numerical example is explained for demonstrating the applicability of the proposed scheme.


Author(s):  
Ayman A. Nada ◽  
Abdullateef H. Bashiri

Trajectory tracking robotic systems require complex control procedures that occupy less space and need less energy. For these reasons, the development of computerized and integrated control systems is crucial. Recently, developing reconfigurable Field Programmable Gate Arrays (FPGAs) give a prominence of the complete robotic control systems. Furthermore, it has been found in the literature that the model-based control methods are most efficient and cost-effective. This model must interpret how multiple moving parts interact with each other and with their environment. On the other hand, MultiBody Dynamic (MBD) approach is considered to solve these difficulties to attain the models accurately. However, the obtained equations of motion do not match the well-developed forms of control theory. In this paper, the MBD model of a mobile robot is established; and the equations of motion are reshaped into their control canonical form. Additionally, the Sliding Mode Control (SMC) theory is used to design the control law. The constraints’ manifold, which is available in the equations of the MBD system, are imposed systematically as the switching surface. SMC is applied because of its ability to address multiple-input/multiple-output nonlinear systems without resorting any approximations. Eventually, the experimental verification of the proposed algorithm is carried out using DaNI mobile robot in which, a Reconfigurable Input/Output (RIO) board is used to reorient the control design, so that can fit the required trajectory. The control law is implemented using LabVIEW software and NI-sbRIO-9631 with acceptable performance. It is obvious that the integration of MBD/SMC/FPGA can be used successfully to develop embedded systems for the applications of trajectory tracking robotics.


Author(s):  
Hafedh Abid ◽  
Mohamed Chtourou ◽  
Ahmed Toumi

In this work we are interested to discrete robust fuzzy sliding mode control. The discrete SISO nonlinear uncertain system is presented by the Takgi- Sugeno type fuzzy model state. We recall the principle of the sliding mode control theory then we combine the fuzzy systems with the sliding mode control technique to compute at each sampling time the control law. The control law comports two terms: equivalent control law and switching control law which has a high frequency. The uncertainty is replaced by its upper bound. Inverted pendulum and mass spring dumper are used to check performance of the proposed fuzzy robust sliding mode control scheme.


2002 ◽  
Vol 8 (2) ◽  
pp. 189-217 ◽  
Author(s):  
Feijun Song ◽  
Edgar An ◽  
Samuel M. Smith

Successful controller development involves three distinct stages, namely, control law design, code debugging and field test. For Autonomous Underwater Vehicle (AUV) applications, the first two stages require special strategies. Since the dynamics of an AUV is highly nonlinear, and the environment that an AUV operates in is noisy with external disturbance that cannot be neglected, a robust control law must be considered in the first stage. The control law design is even more difficult when optimal criteria are also involved. In the second stage, since the software architecture on an AUV is very complicated, debugging the controllers alone without all the software routines running together often can not reveal subtle faults in the controller code. Thorough debugging needs at-sea test, which is costly. Therefore, a platform that can help designers debug and evaluate controller performance before any at-sea experiment is highly desirable. Recently, a 6 Degree of Freedom (DOF) AUV simulation toolbox was developed for the Ocean Explorer (OEX) series AUVs developed at Florida Atlantic University. The simulation toolbox is an ideal platform for controller in-lab debugging and evaluation. This paper first presents a novel robust controller design methodology, named the Sliding Mode Fuzzy Controller (SMFC). It combines sliding mode control and fuzzy logic control to create a robust, easy on-line tunable controller structure. A formal proof of the robustness of the proposed nonlinear sliding mode control is also given. A pitch and a heading controller have been designed with the presented structure and the controller code was tested on the simulation software package as well as at sea. The simulated and at-sea test data are compared. The whole controller design procedure described in this paper clearly demonstrates the advantage of using the simulation toolbox to debug and test the controller in-lab. Moreover, the pitch and heading controller have been used in the real system for more than 2 years, and have also been successfully ported to other types of vehicles without any major modification on the controller parameters. The similarity of the controller performances on different vehicles further demonstrates the robustness of the proposed Sliding Mode Fuzzy Controller. The main contribution of this paper is to provide useful insights into the design and implementation of the proposed control architecture, and its application in AUV control.


2018 ◽  
Vol 41 (2) ◽  
pp. 447-457 ◽  
Author(s):  
Aghiles Ardjal ◽  
Rachid Mansouri ◽  
Maamar Bettayeb

This paper deals with a nonlinear control algorithm based on a sliding mode theory to reach the maximum power point tracking of a variable-speed wind energy conversion system. The proposed method allows us to combine the sliding mode and fractional-order theory. The fractional-order component of the control law is introduced by a sliding surface. In order to validate this controller, fractional and integer sliding modes are developed. The proposed fractional-order sliding mode control law is tested in a Simulink/Matlab environment. The simulation results show the effectiveness of the proposed scheme, suppression of the chattering phenomenon and robustness of the proposed controller compared to the integer sliding mode control law.


2021 ◽  
Vol 118 (2) ◽  
pp. 215
Author(s):  
Yin Fang-Chen ◽  
Wu Xiang-Cheng

This paper introduces a linear quadratic sliding mode control (LQ-SMC) scheme into a looper control system. First, according to a 1700 mm tandem hot mill, the state-space dynamic model of the looper system was established, and then, the optimal control law of the looper system was obtained based on the established model. Finally, the optimal sliding mode and optimal sliding mode control law of the LQ-SMC scheme were designed such that the sliding motion could satisfy the optimal value of the quadratic performance index. Simulation results show that the proposed control scheme has complete robustness to external disturbances that satisfies certain conditions, and the coupling between the looper angle dynamic and strip tension dynamic is also minimized.


Sign in / Sign up

Export Citation Format

Share Document