Design of 180°-switched-line phase shifter with constant phase shift using CRLH TL

Author(s):  
Jun Zhang ◽  
S.W. Cheung ◽  
Qi Zhu
Keyword(s):  
2013 ◽  
Vol 39 (1) ◽  
pp. 142 ◽  
Author(s):  
Xudong Wang ◽  
Erwin H. W. Chan ◽  
Robert A. Minasian

2016 ◽  
Vol 8 (3) ◽  
pp. 399-404 ◽  
Author(s):  
Boris Moret ◽  
Nathalie Deltimple ◽  
Eric Kerhervé ◽  
Baudouin Martineau ◽  
Didier Belot

This paper presents a 60 GHz reconfigurable active phase shifter based on a vector modulator implemented in 65 nm complementary metal–oxide–semiconductor technology. This circuit is based on the recombination of two differential paths in quadrature. The proposed vector modulator allows us to generate a phase shift between 0° and 360°. The voltage gain varies between −13 and −9 dB in function of the phase shift generated with a static consumption between 26 and 63 mW depending on its configuration.


2015 ◽  
Vol 77 (10) ◽  
Author(s):  
Nasser A ALQuaiti ◽  
Noor Asniza Murad

This paper discussed the design and performances of a liquid crystal phase shifter that can be used in tuning devices. Tuning devices growth with the demand in the emerging in telecommunication system. Tuning devices with smooth continuous phase shifting at low cost and compact size would be an advantage. This paper proposed a phase shifter using 5CB liquid crystal material. The advantages of using the material is the smoothness and continuity of the transitions in the phase shift. It is done by having a structure with cavity filled with the liquid crystal and applied with certain voltage that can be changed. The changes in voltage would change the applied electric field, and thus would change the permittivity of the material. The changes would affect the wave propagation and thus contribute to the phase shifting. The performance of the phase shifter was tested by means of simulation using CST Suite 2014 software. The results show that the higher the frequency, the higher the phase shift would occur. The highest FoM achieved is 68 (deg/dB) at 8 GHz. A phase shifter with smooth and continuous phase shift can be used as the feeding network in an array scanning antennas systems.


2020 ◽  
Vol 2020 ◽  
pp. 1-5
Author(s):  
Jessada Konpang ◽  
Natchayathorn Wattikornsirikul

An ease of four-port dual-mode diplexer with high signal isolation is presented. A compact dual-mode diplexer with high signal isolation between the Rx and Tx modules is achievable by only using one resonator filter topology. Two back-to-back dual-mode diplexers have a 180° phase shift in one branch. The high isolation can be achieved by amplitude and phase cancellation technique. The delayed transmission line can be easily achieved by the phase shifter. The simulated and measured four-port dual-mode diplexers are designed at the centre frequency of Rx/Tx at 1.95 GHz and 2.14 GHz, respectively. The measured results of Rx/Tx dual-mode diplexer devices are presented with 47.1 dB Rx/Tx isolation. This four-port dual-mode diplexer achieves the isolation (S32) of more than 24.1 dB when compared with the conventional three-port dual-mode diplexer structure.


1999 ◽  
Vol 603 ◽  
Author(s):  
Amit S. Nagra ◽  
Troy R. Taylor ◽  
Padmini Periaswamy ◽  
James Speck ◽  
Robert A. York

AbstractPeriodically loaded line phase shifter circuits using voltage tunable BaSrTiO3 (BST) parallel plate capacitors have been demonstrated at X-band. The first such phase shifter circuit was capable of 100° of phase shift with an insertion loss of 7.6 dB at 10 GHz. Subsequently, the monolithic fabrication procedure was refined resulting in an improved phase shifter circuit with 200° of phase shift and an insertion loss of 6.2 dB at 10 GHz. In addition to promising loss performance (32°/dB) at 10 GHz, the circuits reported here have several desirable features such as moderate control voltages (20 V), room temperature operation, and compatibility with monolithic fabrication techniques.


2008 ◽  
Vol 56 (10) ◽  
pp. 2180-2189 ◽  
Author(s):  
Jen-Chieh Wu ◽  
Ting-Yueh Chin ◽  
Sheng-Fuh Chang ◽  
Chia-Chan Chang

2004 ◽  
Vol 833 ◽  
Author(s):  
Minoru Noda ◽  
Daniel Popovici ◽  
Masanori Okuyama ◽  
Yoshinobu Sasaki ◽  
Makio Komaru

ABSTRACTBarium Strontium Titanate (BST) thin films have been deposited on (100)-oriented MgO substrate by combining preparation of initial layer by Pulsed Laser Deposition and main layer by Metal-Organic-Decomposition method. Films with an initial layer of 20, 30 and 40 nm thickness and final thickness of 400, 650 and 800 nm have been obtained. Physical and dielectric properties of the BST thin films have been characterized from the viewpoint of frequency-agile micro and millimeter wave circuit applications. The results reveal that Ba0.6Sr0.4TiO3 thin films have a good crystallinity with characteristic orientation that is affected by the deposition conditions of the initial layer. Interdigital capacitor with a gap of 10 μm has been characterized and the dielectric loss and tunability are as low as 0.002 to 0.004 and 12%, respectively, at frequency of 1 MHz for the applied voltage from -/+40V to +/-40V. At microwave frequencies, classical coplanar waveguide lines formed on BST/(100)MgO were investigated. A differential phase shift of 18 degree was obtained at 20 GHz with insertion loss of about −2 dB at 60 V for Au/Cr interconnection. Finally, a 3-stage LC-ladder-type phase shifter with variable capacitors of BST thin film has been fabricated considering the experimental results obtained for the coplanar waveguide lines and a maximum phase shift of 40 degrees is obtained at 20 GHz at 60 V.


2011 ◽  
Vol 403-408 ◽  
pp. 1813-1816
Author(s):  
Wei Hua Liu ◽  
Cheng Zhi Xu ◽  
Yuan Zhong Xu

The effect of the phase deviation on the phase shifter in a 2 × 4 optical 90 hybrid without cross-over is discussed based on a set of formulas derived for the output of this structure. We found that if the two power inputs are equal, the phase deviation of the phase shifter only introduces attenuation in output AC component, and if not equal, it not only introduces the AC component attenuation, but also leads to DC component differentiation, which degrades the optical signal-to-noise ratio of the quadrature output.


Sign in / Sign up

Export Citation Format

Share Document