Green operation of multi-band wireless LAN in 60 GHz and 2.4/5 GHz

Author(s):  
Harkirat Singh ◽  
Julan Hsu ◽  
Lochan Verma ◽  
Scott Seongwook Lee ◽  
Chiu Ngo
Keyword(s):  
60 Ghz ◽  
5 Ghz ◽  
2018 ◽  
Vol 7 (2) ◽  
pp. 68-75 ◽  
Author(s):  
P. N. Vummadisetty ◽  
A. Kumar

This research article presents, a compact 0.19 λ x 0.32 λ size ACS fed printed monopole wideband antenna loaded with multiple radiating branches suitable for LTE2300/WiBro, 5 GHz WLAN and WiMAX applications. The proposed triple band uniplanar antenna encompasses of C shaped strip, L shaped strip, rectangular shaped strip and a lateral ground plane. All the radiating strips and ground plane are etched on the 26 × 15 m size low cost FR4 epoxy substrate. This designed geometry evoked three independent reonances at 2.3 GHz, 3.5 GHz and 5.5 GHz with precise impedance matching over each operating band. The reflection coefficient ( ) response of the presented antenna demonstrates three distinct resonant modes associated with -10 dB bandwidths are about 2.24-2.40 GHz, 3.38-3.83 GHz and 5.0-6.25 GHz respectively. From the study, it is also observed that the proposed design works perfect with microstrip as well as CPW feedings. Hence the designed Multi Feed Multi Band (MFMB) antenna can be easily deployed in to any portable wireless device that works for 2.3/3.5/ 5 GHz frequency bands.


2016 ◽  
Vol 2016 (CICMT) ◽  
pp. 000191-000198 ◽  
Author(s):  
A. Isapour ◽  
D. Bahloul ◽  
A. B. Kouki

Abstract The wireless telecommunication systems have an undeniable role in today's society. The rapid progress of wireless services and applications accelerates demands for high data-rate reliable systems. The 60 GHz band with its 5 GHz globally unlicensed available spectrum, provides a great opportunity for the next generation of high data-rate wireless communication. Despite this attractive bandwidth surrounding 60 GHz, there are still many challenges to be addressed such as the loss performance and the integration with other systems. Low Temperature Cofired Ceramic (LTCC) technology, with its unique and mature multilayer fabrication process, has excellent capability of realizing miniaturized 3D low loss structures to overcome these challenges. Since, one of the key components in any communication system for both interconnecting and designing components is Low loss transmission lines, in this article we overview the performances and challenges for four different most practical transmission lines at 60 GHz in LTCC: Microstrip, Stripline, Coplanar Waveguide (CPW), and LTCC Integrated Waveguide (LIW).


2012 ◽  
Vol 2012 (CICMT) ◽  
pp. 000077-000081
Author(s):  
Sebastian Brunner ◽  
Manfred Stadler ◽  
Xin Wang ◽  
Frank Bauer ◽  
Klaus Aichholzer

In this paper we will present an application of advanced Low Temperature Cofired Ceramic (LTCC) technology beyond 60 GHz. Therefore a RF frontend for 76–81 GHz radar frequency was built. LTCC is a well established technology for applications for consumer handheld units <5 GHz but will provide solutions for applications for high frequencies in the range of 60 GHz and beyond. Radar sensors operating in the 76-81 GHz range are considered key for Advanced Driver Assistance Systems (ADAS) like Adaptive Cruise Control (ACC), Collision Mitigation and Avoidance Systems (CMS) or Lane Change Assist (LCA). These applications are the next wave in automotive safety systems and have thus generated increased interest in lower-cost solutions especially for the mm-wave frontend section.


Author(s):  
Diego Dupleich ◽  
Robert Muller ◽  
Christian Schneider ◽  
Sergii Skoblikov ◽  
Jian Luo ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document