Investigation of gas-liquid two-phase flow patterns based on high-speed imaging methods

2010 ◽  
Author(s):  
Wen Peng Hong ◽  
Yan Liu
Keyword(s):  
High Speed ◽  
Two Phase Flow ◽  
Flow Patterns ◽  
Phase Flow ◽  
High Speed Imaging ◽  
Two Phase ◽  
Imaging Methods

High Speed Imaging and Two-Phase Flow Patterns During Flow Boiling in a Single Microchannel

2008 ◽  
Author(s):  
Jacqueline Barber ◽  
Khellil Sefiane ◽  
David Brutin ◽  
Lounes Tadrist
Keyword(s):  
High Speed ◽  
Two Phase Flow ◽  
Flow Boiling ◽  
Pressure Sensors ◽  
Flow Patterns ◽  
Bubble Nucleation ◽  
Phase Flow ◽  
Vapour Bubble ◽  
Two Phase ◽  
Over Time

Boiling in microchannels remains elusive due to the lack of full understanding of the mechanisms involved. A powerful tool in achieving better comprehension of the mechanisms is detailed imaging and analysis of the two phase flow at a fundamental level. We induced boiling in a single microchannel geometry (hydraulic diameter 727 μm), using a refrigerant FC-72, to investigate several flow patterns. A transparent, metallic, conductive deposit has been developed on the exterior of rectangular microchannels, allowing simultaneous uniform heating and visualisation to be conducted. The data presented in this paper is for a particular case with a uniform heat flux of 4.26 kW/m2 applied to the microchannel and inlet liquid mass flowrate, held constant at 1.33×10−5 kg/s. In conjunction with obtaining high-speed images and videos, sensitive pressure sensors are used to record the pressure drop profiles across the microchannel over time. Bubble nucleation, growth and coalescence, as well as periodic slug flow, are observed in the test section. Phenomena are noted, such as the aspect ratio and Reynolds number of a vapour bubble, which are in turn correlated to the associated pressure drops over time. From analysis of our results, images and video sequences with the corresponding physical data obtained, it is possible to follow visually the nucleation and subsequent both ‘free’ and ‘confined’ growth of a vapour bubble over time.

Characteristics of Gas-Liquid Two-Phase Flow Patterns in Miniature Channel Having a Gas Permeable Sidewall

2002 ◽  
Author(s):  
H. Yang ◽  
T. S. Zhao ◽  
P. Cheng
Keyword(s):  
Test Section ◽  
High Speed ◽  
Annular Flow ◽  
Two Phase Flow ◽  
Porous Plate ◽  
Flow Patterns ◽  
Phase Flow ◽  
Two Phase ◽  
Flow Configuration ◽  
Blowing Up

Characteristics of gas-liquid two-phase flow patterns in a miniature square cross-section channel having a gas permeable sidewall have been investigated visually using a high-speed motion analyzer. The problem under consideration is encountered in the design of Direct Feed Methanol Fuel Cells (DMFC). The test section was a horizontally oriented rectangular transparent (Lucite material) channel with its lower wall consisting of a porous plate. Liquid was fed into the test section from its entrance, while gas was injected uniformly into the test section along the lower porous sidewall. The visual study shows the typical flow patterns found in the test section include bubbly flow, plug flow, slug flow, and annular flow. However, unlike the conventional co-current two-phase flow in a channel with gas and liquid uniformly entering from one of its ends, for the flow configuration considered in this work, it was found that two or three of the above mentioned flow patterns appeared simultaneously at different locations of the channel. The length of each flow pattern varied with the flow rates of liquid and gas. A distinct feature of annular flow for the present flow configuration is that small bubbles were continuously generated from the porous plate, which grew by blowing up the liquid film, formed a semi-sphere shape, and then ruptured and released gas into the core flow.

scholarly journals Investigating the Characteristics of Two-Phase Flow Using Electrical Capacitance Tomography (ECT) for Three Pipe Orientations

Processes ◽  
2020 ◽  
Vol 8 (1) ◽  
pp. 51 ◽  
Author(s):  
Zeyad Almutairi ◽  
Fayez M. Al-Alweet ◽  
Yusif A. Alghamdi ◽  
Omar A. Almisned ◽  
Othman Y. Alothman
Keyword(s):  
High Speed ◽  
Two Phase Flow ◽  
Flow Patterns ◽  
Electrical Capacitance Tomography ◽  
Experimental Measurements ◽  
Phase Flow ◽  
Electrical Capacitance ◽  
Liquid Holdup ◽  
Two Phase ◽  
Capacitance Tomography

Experiments of gas–liquid flow in a circular pipe for horizontal and inclined positions (upward/downward) are reported. The characteristics of two-phase flow in terms of liquid holdup (ε(L)) and induced flow patterns are studied using three experimental techniques; time-averaged ε(L) from permittivity profiles using electrical capacitance tomography (ECT), instantaneous ε(L) using two fast-closing valves (TFCV), and high-speed camera images (HSCI) to capture/identify the formed flow patterns. Thus, this experimental setup enables the development of more well-defined flow patterns in gas–liquid two-phase flow and allows for multi-technique verification of the results. Taken from experimental measurements, a model is proposed to predict ε(L) for high and low situations. The correlations are a function of the hydrodynamic dimensionless quantities which provide hydrodynamic similarity. Regarding different pipe orientations, ε(L) predictions are comparable to ε(L) from experimental measurements with accepted accuracy: 88% of the predictions are within ±5–15% and 98% are below ±20%. The correlations also were validated by reported results and against correlations available in the literature and show higher prediction accuracy. It is confirmed that the kinematic similarity which is achieved by the gas–liquid velocity ratios and the inertial forces influence the flow pattern and the liquid holdup.

Characteristics of Two-Phase Flow in Packed Bed Systems

2021 ◽  
Author(s):  
Noriaki Yasugi ◽  
Akito Fujitsu ◽  
Naoya Odaira ◽  
Daisuke Ito ◽  
Kei Ito ◽  
...  
Keyword(s):  
Pressure Drop ◽  
High Speed ◽  
Two Phase Flow ◽  
Packed Bed ◽  
Phase Flow ◽  
Two Dimensional ◽  
High Speed Imaging ◽  
Two Phase ◽  
Dimensional Network ◽  
Interfacial Drag

Abstract Two-phase pressure drop in the debris has been studied by many researchers in relation to the debris cooling characteristics during a severe accident in a nuclear reactor. However, its flow regime transition of the two-phase flow in the debris has not been well understood, which strongly affects the interfacial drag and the pressure drop. Conventional models for gas-liquid two-phase flow pressure drop have not been established well to evaluate interfacial drag accurately. In this study, high-speed imaging of a two-dimensional network model was performed to clarify the effect of flow pattern on interfacial drag and pressure drop. Normally it would be very difficult to visualize such two-phase flow behavior in an ordinary packed bed due to the reflection/refraction of light and/or overlapping bubbles, even if the test section is made of transparent materials. Therefore, in this study, a test section, which simulates two-dimensional network of porous structures, was fabricated to avoid the overlapping bubbles. By using a high-speed imaging of the two-dimensional network model, two-phase flow pattern in the porous structure have been identified. From the experimental results, it was suggested that the interfacial drag term should be modified in the gas-liquid two-phase flow pressure drop model.

Correlation between Void Fraction and Two-Phase Flow Pattern Air-Water with Low Viscosity in Mini Channel with Slope 30 Degrees

2020 ◽  
Vol 846 ◽  
pp. 289-295
Author(s):  
Sukamta ◽  
Sudarja
Keyword(s):  
Void Fraction ◽  
High Speed ◽  
Two Phase Flow ◽  
Fluid Velocity ◽  
Flow Patterns ◽  
Superficial Velocity ◽  
Working Fluid ◽  
Phase Flow ◽  
Two Phase ◽  
Void Fractions

Two-phase flow has been used in so many industrial processes, such as boilers, reactors, heat exchangers, geothermal and others. Some parameters which need to be studied include flow patterns, void fractions, and pressure changes. Research on void fractions aims to determine the composition of the gas and liquid phases that will affect the nature and value of the flow property. The purpose of this study is to find out the characteristics of the void fraction of various patterns that occurs and to determine the characteristics of the velocity, length, and frequency of bubbly and plug. Data acquisition was used to convert the data from analog to digital so that it can be recorded, stored, processed, and analyzed. High-speed camera Nikon type J4 was used to record the flow. The condition of the study was adiabatic with variation of superficial gas velocity (JG), superficial fluid velocity (JL), and also working fluid. To determine the void fraction by using the digital image processing method. The results of the study found that the flow patterns which occurred in this study were bubbly, plug, annular, slug-annular and churn flows. It also showed that the void fraction value is determined by the superficial velocity of the liquid and air. The higher the superficial velocity of the air, the lower the void fraction value.

Two-Phase Flow Patterns in a Four by Four Rod Bundle

2006 ◽  
Author(s):  
Yoshitaka Mizutani ◽  
Shigeo Hosokawa ◽  
Akio Tomiyama
Keyword(s):  
Flow Pattern ◽  
High Speed ◽  
Two Phase Flow ◽  
Flow Patterns ◽  
Square Lattice ◽  
Phase Flow ◽  
Two Phase ◽  
Local Flow ◽  
Rod Bundle ◽  
Four Square

Air-water two-phase flow patterns in a four by four square lattice rod bundle consisting of an acrylic channel box of 68 mm in width and transparent rods of 12 mm in diameter were observed by utilizing a high speed video camera, FEP (fluorinated ethylene propylene) tubes for rods, and a fiberscope inserted in a rod. The FEP possesses the same refractive index as water, and thereby, whole flow patterns in the bundle and local flow patterns in subchannels were successfully visualized with little optical distortion. The ranges of liquid and gas volume fluxes, <JG> and <JL>, in the present experiments were 0.1 < <JL> < 2.0 m/s and 0.04 < <JG> < 8.85 m/s, which covered typical two-phase flow patterns appearing in a fuel bundle of a boiling water nuclear reactor. As a result, the following conclusions were obtained: (1) the region of slug flow in the <JG> – <JL> flow pattern diagram is so narrow that it can be regarded as a boundary between bubbly and churn flows, (2) the boundary between bubbly and churn flows is close to the boundary between bubbly and slug flows of the Mishima & Ishii’s flow pattern transition model, and (3) the boundary between churn and annular flows is well predicted by the Mishima & Ishii’s model.

Characterization of Two-Phase Flow Patterns in Small Round Tubes

2014 ◽  
Vol 525 ◽  
pp. 256-259
Author(s):  
Wen Peng Hong ◽  
Guo Qing Niu ◽  
Ming Liang Jin
Keyword(s):  
High Speed ◽  
Two Phase Flow ◽  
Flow Characteristics ◽  
Flow Patterns ◽  
Phase Flow ◽  
Two Phase ◽  
High Speed Video ◽  
Video Systems ◽  
Small Tube

To investigate flow characteristics by high speed video systems, experimental study was conducted to gas-liquid two-phase flow in horizontal round small tube with diameter of 5.5 and 2.6 mm, the typical flow pattern images were obtained, but stratified flow of the conventional size horizontal channel had not been discovered. Gas and liquid superficial velocities range from 0.1 to 100 ms-1, and 0.01to 10.0 ms-1 respectively. Flow patterns for co-current flow of air-water mixtures in horizontal round tubes are determined by high-speed video analysis to develop flow regime maps and the transitions between these flow regimes. Comparisons with the relevant literatures show that diameter and surface tension effects play an important role in determining the flow patterns and transitions between them.

Two-Phase Flow With Surfactants in a Microchannel

2009 ◽  
Author(s):  
Dong Liu ◽  
Aritra Sur
Keyword(s):  
High Speed ◽  
Two Phase Flow ◽  
Flow Instability ◽  
Sodium Dodecyl ◽  
Surfactant Solution ◽  
Flow Regimes ◽  
Flow Patterns ◽  
Phase Flow ◽  
Two Phase ◽  
Circular Microchannel

Addition of surfactants to liquids helps to eliminate intermittent two-phase flow patterns and alleviate flow instability. These features are very desirable for two-phase microfluidic applications. However, very little information is available on two-phase flow patterns of surfactant solution in the microchannels. The present paper reports a study of adiabatic two-phase flow with surfactants in a circular microchannel of a 180-μm diameter. Air-water mixtures with trace quantities of sodium dodecyl sulfate (SDS) were used in the experiments. The maximum superficial velocities measured were 4 m/s for the liquid and 65 m/s for the gas. High-speed photographic technique was employed to visualize various two-phase flow patterns and to identify the transition boundaries between different flow regimes. The results were compared to data obtained from air-water flow without surfactants. It was found that addition of surfactants brings in significant modification to the two-phase flow regimes as well as their transition characteristics in microchannels; in particular, slug flow is effectively suppressed.

Micro-Scale Flow Pattern Classification Based on the K-Means Clustering Algorithm

2010 ◽  
Author(s):  
Daniel Sempe´rtegui ◽  
Gherhardt Ribastki
Keyword(s):  
Flow Pattern ◽  
High Speed ◽  
Clustering Algorithm ◽  
Two Phase Flow ◽  
Flow Boiling ◽  
Saturation Temperature ◽  
Flow Patterns ◽  
Statistical Characteristics ◽  
Phase Flow ◽  
Two Phase

In the present work, an objective method to characterize two-phase flow pattern was developed and implemented. The method is based on the characteristics of the signals provided by transducers measuring local temperature and pressure plus the intensity of a laser beam crossing the two-phase flow. The statistical characteristics of these signals were used as input features for the k-means clustering method. In order to implement the method, experimental flow patterns were obtained during flow boiling of R245fa in a 2.32 mm ID tube. Experiments were performed for mass velocities from 100 to 700kg/m2s, saturation temperature of 31 °C and vapor qualities up to 0.99. The cluster classification was compared against flow patterns segregated based on high speed camera images (8000 images/s) and a reasonable agreement was obtained.

scholarly journals Application of RQA and SOM for identification of two-phase flow patterns during boiling in horizontal minichannel

2021 ◽  
Vol 321 ◽  
pp. 02008
Author(s):  
Hubert Grzybowski ◽  
Iwona Zaborowska ◽  
Romuald Mosdorf
Keyword(s):  
Pressure Drop ◽  
Liquid Flow ◽  
Slug Flow ◽  
High Speed ◽  
Two Phase Flow ◽  
Flow Boiling ◽  
Flow Patterns ◽  
Phase Flow ◽  
Two Phase ◽  
Inner Diameter

In the paper, numerical methods of data analysis recurrence quantification analysis (RQA) and self-organizing map (SOM) have been used to analyse pressure drop oscillations during the flow boiling in minichannel. The performed analysis allows us to identify flow patterns based on the character of the pressure drop oscillations. The following two-phase flow patterns have been identified: liquid flow, liquid flow with small vapour bubble, slug flow, long slug flow and confined bubble flow. In the experiment, the open-loop boiling system in a circular horizontal minichannel with an inner diameter of 1 mm was investigated. The two-phase flow patterns at the outlet of the heated section were observed through the glass tube (with an inner diameter of 1 mm) and recorded by a high-speed camera Phantom v1610.

Sign in / Sign up

Export Citation Format

Share Document