Medium Voltage to Low Voltage Contactless Power Transformation for Data Centers

2021 ◽  
Author(s):  
Guangqi Zhu ◽  
Birger Pahl ◽  
Richard J. Fons ◽  
Isaac Wong ◽  
Subhashish Bhattacharya ◽  
...  
Keyword(s):  
Data Centers ◽  
Low Voltage ◽  
Power Transformation ◽  
Medium Voltage

Reduction of the Low Voltage Substation Constraints by Inserting Photovoltaic Systems in Underserved Areas

2019 ◽  
Vol 12 (2) ◽  
pp. 105-112
Author(s):  
Benbouza Naima ◽  
Benfarhi Louiza ◽  
Azoui Boubekeur
Keyword(s):  
Low Voltage ◽  
Voltage Drop ◽  
Electrical Energy ◽  
Utilization Rate ◽  
Photovoltaic Systems ◽  
Voltage Distribution ◽  
Medium Voltage ◽  
Pv Systems ◽  
Transformer Substation ◽  
Load Pattern

Background: The improvement of the voltage in power lines and the respect of the low voltage distribution transformer substations constraints (Transformer utilization rate and Voltage drop) are possible by several means: reinforcement of conductor sections, installation of new MV / LV substations (Medium Voltage (MV), Low Voltage (LV)), etc. Methods: Connection of mini-photovoltaic systems (PV) to the network, or to consumers in underserved areas, is a well-adopted solution to solve the problem of voltage drop and lighten the substation transformer, and at the same time provide clean electrical energy. PV systems can therefore contribute to this solution since they produce energy at the deficit site. Results: This paper presents the improvement of transformer substation constraints, supplying an end of low voltage electrical line, by inserting photovoltaic systems at underserved subscribers. Conclusion: This study is applied to a typical load pattern, specified to the consumers region.

scholarly journals Machine Learning and GIS Approach for Electrical Load Assessment to Increase Distribution Networks Resilience

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4133
Author(s):  
Alessandro Bosisio ◽  
Matteo Moncecchi ◽  
Andrea Morotti ◽  
Marco Merlo
Keyword(s):  
Machine Learning ◽  
Distribution System ◽  
Low Voltage ◽  
Regression Tree ◽  
Distribution Networks ◽  
Machine Learning Algorithms ◽  
Extreme Weather Events ◽  
Medium Voltage ◽  
Weather Events ◽  
Building Area

Currently, distribution system operators (DSOs) are asked to operate distribution grids, managing the rise of the distributed generators (DGs), the rise of the load correlated to heat pump and e-mobility, etc. Nevertheless, they are asked to minimize investments in new sensors and telecommunication links and, consequently, several nodes of the grid are still not monitored and tele-controlled. At the same time, DSOs are asked to improve the network’s resilience, looking for a reduction in the frequency and impact of power outages caused by extreme weather events. The paper presents a machine learning GIS-based approach to estimate a secondary substation’s load profiles, even in those cases where monitoring sensors are not deployed. For this purpose, a large amount of data from different sources has been collected and integrated to describe secondary substation load profiles adequately. Based on real measurements of some secondary substations (medium-voltage to low-voltage interface) given by Unareti, the DSO of Milan, and georeferenced data gathered from open-source databases, unknown secondary substations load profiles are estimated. Three types of machine learning algorithms, regression tree, boosting, and random forest, as well as geographic information system (GIS) information, such as secondary substation locations, building area, types of occupants, etc., are considered to find the most effective approach.

scholarly journals Series Active Filter Design Based on Asymmetric Hybrid Modular Multilevel Converter for Traction System

Electronics ◽  
2018 ◽  
Vol 7 (8) ◽  
pp. 134 ◽  
Author(s):  
Muhammad Ali ◽  
Muhammad Khan ◽  
Jianming Xu ◽  
Muhammad Faiz ◽  
Yaqoob Ali ◽  
...  
Keyword(s):  
Low Voltage ◽  
Filter Design ◽  
Switching Frequency ◽  
Modular Multilevel Converter ◽  
Multilevel Converter ◽  
Medium Voltage ◽  
Converter Topologies ◽  
Asymmetric Hybrid ◽  
Simulation Results ◽  
Traction System

This paper presents a comparative analysis of a new topology based on an asymmetric hybrid modular multilevel converter (AHMMC) with recently proposed multilevel converter topologies. The analysis is based on various parameters for medium voltage-high power electric traction system. Among recently proposed topologies, few converters have been analysed through simulation results. In addition, the study investigates AHMMC converter which is a cascade arrangement of H-bridge with five-level cascaded converter module (FCCM) in more detail. The key features of the proposed AHMMC includes: reduced switch losses by minimizing the switching frequency as well as the components count, and improved power factor with minimum harmonic distortion. Extensive simulation results and low voltage laboratory prototype validates the working principle of the proposed converter topology. Furthermore, the paper concludes with the comparison factors evaluation of the discussed converter topologies for medium voltage traction applications.

scholarly journals Operation Modes of HV/MV Substations

2009 ◽  
Vol 25 (25) ◽  
pp. 81-86
Author(s):  
Josifs Survilo ◽  
Antons Kutjuns
Keyword(s):  
High Voltage ◽  
Low Voltage ◽  
Warm Season ◽  
Electrical Energy ◽  
Cold Season ◽  
Power Losses ◽  
Medium Voltage ◽  
The Third ◽  
Operation Modes ◽  
Mode 3

Operation Modes of HV/MV SubstationsA distribution network consists of high voltage grid, medium voltage grid, and low voltage grid. Medium voltage grid is connected to high voltage grid via substations with HV/MV transformers. The substation may contain one, mostly two but sometimes even more transformers. Out of reliability and expenditure considerations the two transformer option prevail over others mentioned. For two transformer substation, there may be made choice out of several operation modes: 1) two (small) transformers, with rated power each over 0.7 of maximum substation load, permanently in operation; 2) one (big) transformer, with rated power over maximum substation load, permanently in operation and small transformer in constant cold reserve; 3) big transformer in operation in cold season, small transformer-in warm one. Considering transformer load losses and no load losses and observing transformer loading factor β it can be said that the mode 1) is less advantageous. The least power losses has the mode 3). There may be singled out yet three extra modes of two transformer substations: 4) two big transformers in permanent operation; 5) one big transformer permanently in operation and one such transformer in cold reserve; 6) two small transformers in operation in cold season of the year, in warm season-one small transformer on duty. At present mostly two transformers of equal power each are installed on substations and in operation is one of them, hence extra mode 5). When one transformer becomes faulty, it can be changed for smaller one and the third operation mode can be practiced. Extra mode 4) is unpractical in all aspects. The mode 6) has greater losses than the mode 3) and is not considered in detail. To prove the advantage of the third mode in sense of power losses, the notion of effective utilization time of power losses was introduced and it was proven that relative value of this quantity diminishes with loading factor β. The use of advantageous substation option would make it possible to save notable amount of electrical energy but smaller transformer lifetime of this option must be taken into account as well.

scholarly journals Novel Enhanced Modular Multilevel Converter for High-Voltage Direct Current Transmission Systems

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2257
Author(s):  
Dimitrios Vozikis ◽  
Fahad Alsokhiry ◽  
Grain Philip Adam ◽  
Yusuf Al-Turki
Keyword(s):  
High Voltage ◽  
Low Voltage ◽  
Modular Multilevel Converter ◽  
Multilevel Converter ◽  
Medium Voltage ◽  
High Voltage Direct Current ◽  
Current Transmission ◽  
The Cost ◽  
Voltage Harmonics ◽  
Chain Links

This paper proposes an enhanced modular multilevel converter as an alternative to the conventional half-bridge modular multilevel converter that employs a reduced number of medium-voltage cells, with the aim of improving waveforms quality in its AC and DC sides. Each enhanced modular multilevel converter arm consists of high-voltage and low-voltage chain-links. The enhanced modular multilevel converter uses the high-voltage chain-links based on medium-voltage half-bridge cells to synthesize the fundamental voltage using nearest level modulation. Although the low-voltage chain-links filter out the voltage harmonics from the voltage generated by the high-voltage chain-links, which are rough and stepped approximations of the fundamental voltage, the enhanced modular multilevel converter uses the nested multilevel concept to dramatically increase the number of voltage levels per phase compared to half-bridge modular multilevel converter. The aforementioned improvements are achieved at the cost of a small increase in semiconductor losses. Detailed simulations conducted in EMPT-RV and experimental results confirm the validity of the proposed converter.

Sign in / Sign up

Export Citation Format

Share Document