An investigation of luminescent and structure properties of Ca-α-SiAlON doped Eu2+phosphors fabricated by hydrothermal synthesis process

Author(s):  
Chun-Han Lin ◽  
Ching-Wu Wang ◽  
Chin-Wei Lai ◽  
Yong-Sheng Ding ◽  
Ji-Syuag Huang ◽  
...  
2015 ◽  
Vol 9 (7) ◽  
pp. 134 ◽  
Author(s):  
Siti Machmudah ◽  
M. Akmal Hadian ◽  
Lenno Samodro K. ◽  
Sugeng Winardi ◽  
Wahyudiono Wahyudiono ◽  
...  

Ceria-zirconia mixed oxides have been synthesized by hydrothermal synthesis process. Under hydrothermalconditions, water potential to control the direction of crystal growth, morphology, particle size and sizedistribution, because of the controllability of thermodynamics and transport properties by pressure andtemperature. The synthesis was carried out at temperatures of 150 − 200 oC and pressure of 5 MPa in a batchreactor. The reactor made of SUS 304 tube reactor with internal volume of 8.8 ml. The synthesized productswere calcined and characterized using SEM, XRD and FTIR. The results showed that the particles formed weresphere shaped particles with smooth morphology and the size of particle diameters were 35, 61, and 31 nm onaverage for reactions temperatures of 150, 180, and 200oC, respectively. The XRD pattern indicated thatceria-zirconia mixed powder was uniformly distributed in the structure to form a homogeneous solid solution.


Nanomaterials ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 2412
Author(s):  
Francisco Ruiz-Jorge ◽  
Almudena Benítez ◽  
M. Belén García-Jarana ◽  
Jezabel Sánchez-Oneto ◽  
Juan R. Portela ◽  
...  

Lithium-ion batteries (LIBs) have gained much interest in recent years because of the increasing energy demand and the relentless progression of climate change. About 30% of the manufacturing cost for LIBs is spent on cathode materials, and its level of development is lower than the negative electrode, separator diaphragm and electrolyte, therefore becoming the “controlling step”. Numerous cathodic materials have been employed, LiFePO4 being the most relevant one mainly because of its excellent performance, as well as its rated capacity (170 mA·h·g−1) and practical operating voltage (3.5 V vs. Li+/Li). Nevertheless, producing micro and nanoparticles with high purity levels, avoiding the formation of iron oxides, and reducing the operating cost are still some of the aspects still to be improved. In this work, we have applied two heating rates (slow and fast) to the same hydrothermal synthesis process with the main objective of obtaining, without any reducing agents, the purest possible LiFePO4 in the shortest time and with the lowest proportion of magnetite impurities. The reagents initially used were: FeSO4, H3PO4, and LiOH, and a crucial phenomenon has been observed in the temperature range between 130 and 150 °C, being verified with various techniques such as XRD and SEM.


2020 ◽  
Vol 87 ◽  
pp. 60-70 ◽  
Author(s):  
Li Yang ◽  
Jinzhu Ma ◽  
Xiaotong Li ◽  
Guangzhi He ◽  
Changbin Zhang ◽  
...  

RSC Advances ◽  
2019 ◽  
Vol 9 (31) ◽  
pp. 17664-17673 ◽  
Author(s):  
Kai Wang ◽  
Yi Yang ◽  
Tian C. Zhang ◽  
Ying Liang ◽  
Qingguo Wang

Magnetic Co-doped Fe3O4@FeOOH nanocomposites were prepared in one step using the hydrothermal synthesis process for catalyzing peroxymonosulfate (PMS) to degrade refractory methylene blue (MB) at a wide pH range (3.0–10.0).


2019 ◽  
Vol 806 ◽  
pp. 118-123 ◽  
Author(s):  
Mariya Yu. Petrushina ◽  
Elena Dedova ◽  
Alexander Gubanov ◽  
Natalya Ruban ◽  
Anastasya Kirilovich ◽  
...  

The ZrW2-xMoxO8 (0≤x≤2) system has a unique property - a negative coefficient of thermal expansion (CTE), that is it shrinks when heated. Such materials solve the problem of undesirable thermal expansion of composites in many areas. In contradistinction to ZrW2O8 and ZrMo2O8, this system has anomalously low CTE values [1,2] and adverse phase transition is shifted to a lower temperature, unlikely area for operation [3,4]. At the same time, the fundamental question remains about the mechanism of formation of ZrW2-xMoxO8(0≤x≤2). According to [5,6], pure cubic ZrW2O8 and ZrMo2O8 are obtained by thermal decomposition of the precursor ZrM2O7(OH)2· 2H2O, where (M = Mo, W). However, the structure of the precursor is extremely sensitive to various changes in the synthesis process. To date, there are a number of works devoted to the hydrothermal synthesis of precursors ZrW2-xMoxO7(OH)2·2H2O (0≤x≤2) solid solutions, however, not all formulations were obtained during the hydrothermal reaction. The study of their thermal properties, as well as structural and phase transformations are not fully studied. Within the paper it was first time proposed to obtain full number of nanosized materials by the hydrothermal method and also to study the nature of the thermal expansion of each member of the solid solution. The obtained data will solve many technical problems associated with dimensional nonvariance in the electronic, oil and gas, optical industry, medicine and rocket engineering.


2014 ◽  
Vol 607 ◽  
pp. 47-50
Author(s):  
Amirul Abd Rashid ◽  
Nor Hayati Saad ◽  
Daniel Bien Chia Sheng ◽  
Kah Yaw Lee ◽  
Wai Yee Lee ◽  
...  

There are few known parameters which govern tungsten trioxide (WO3) hydrothermal synthesis process which includes material source concentration, synthesis temperature, duration, pH value and additive level. Using design of experiments (DOE) approach, a systematic experimental procedure was conducted to investigate the effect of each parameter to the final morphology of the synthesized nanostructure. Despite the response obtained from this study is in qulitative form, the analysis still can be done to identify the combination of variables that most likely can produce either 1-D, 2-D or 3-D nanostructure. This insight is essential before further optimization of the process can be done in order to predict the behavior of the WO3 hydrothermal synthesis process.


Sign in / Sign up

Export Citation Format

Share Document