Mixed potentials for planar multilayered structures including conductive interfaces

2014 ◽  
Author(s):  
Ioannis D. Koufogiannis ◽  
Michael Mattes ◽  
Juan R. Mosig
Keyword(s):  
Multilayered Structures ◽  
Mixed Potentials

scholarly journals Tribological and Mechanical Properties of Multicomponent CrVTiNbZr(N) Coatings

Coatings ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 41
Author(s):  
Yin-Yu Chang ◽  
Cheng-Hsi Chung
Keyword(s):  
Mechanical Properties ◽  
Nitrogen Content ◽  
Adhesion Strength ◽  
Mechanical Performance ◽  
Bulk Material ◽  
High Entropy Alloy ◽  
Composition Gradient ◽  
Multilayered Structures ◽  
High Entropy ◽  
Alloy Target

Multi-element material coating systems have received much attention for improving the mechanical performance in industry. However, they are still focused on ternary systems and seldom beyond quaternary ones. High entropy alloy (HEA) bulk material and thin films are systems that are each comprised of at least five principal metal elements in equally matched proportions, and some of them are found possessing much higher strength than traditional alloys. In this study, CrVTiNbZr high entropy alloy and nitrogen contained CrVTiNbZr(N) nitride coatings were synthesized using high ionization cathodic-arc deposition. A chromium-vanadium alloy target, a titanium-niobium alloy target and a pure zirconium target were used for the deposition. By controlling the nitrogen content and cathode current, the CrNbTiVZr(N) coating with gradient or multilayered composition control possessed different microstructures and mechanical properties. The effect of the nitrogen content on the chemical composition, microstructure and mechanical properties of the CrVTiNbZr(N) coatings was investigated. Compact columnar microstructure was obtained for the synthesized CrVTiNbZr(N) coatings. The CrVTiNbZrN coating (HEAN-N165), which was deposited with nitrogen flow rate of 165 standard cubic centimeters per minute (sccm), exhibited slightly blurred columnar and multilayered structures containing CrVN, TiNbN and ZrN. The design of multilayered CrVTiNbZrN coatings showed good adhesion strength. Improvement of adhesion strength was obtained with composition-gradient interlayers. The CrVTiNbZrN coating with nitrogen content higher than 50 at.% possessed the highest hardness (25.2 GPa) and the resistance to plastic deformation H3/E*2 (0.2 GPa) value, and therefore the lowest wear rate was obtained because of high abrasion wear resistance.

scholarly journals Vibration analysis of a sandwich cylindrical shell in hygrothermal environment

2021 ◽  
Vol 10 (1) ◽  
pp. 414-430
Author(s):  
Chunwei Zhang ◽  
Qiao Jin ◽  
Yansheng Song ◽  
Jingli Wang ◽  
Li Sun ◽  
...  
Keyword(s):  
Cylindrical Shell ◽  
Natural Frequency ◽  
Equations Of Motion ◽  
Single Layer ◽  
Functionally Graded ◽  
Sandwich Shell ◽  
Continuous Change ◽  
Multilayered Structures ◽  
Cylindrical Sandwich Shell ◽  
Vibrational Behavior

Abstract The sandwich structures are three- or multilayered structures such that their mechanical properties are better than each single layer. In the current research, a three-layered cylindrical shell including a functionally graded porous core and two reinforced nanocomposite face sheets resting on the Pasternak foundation is used as model to provide a comprehensive understanding of vibrational behavior of such structures. The core is made of limestone, while the epoxy is utilized as the top and bottom layers’ matrix phase and also it is reinforced by the graphene nanoplatelets (GNPs). The pattern of the GNPs dispersion and the pores distribution play a crucial role at the continuous change of the layers’ properties. The sinusoidal shear deformation shells theory and the Hamilton’s principle are employed to derive the equations of motion for the mentioned cylindrical sandwich shell. Ultimately, the impacts of the model’s geometry, foundation moduli, mode number, and deviatory radius on the vibrational behavior are investigated and discussed. It is revealed that the natural frequency and rotation angle of the sandwich shell are directly related. Moreover, mid-radius to thickness ratio enhancement results in the natural frequency reduction. The results of this study can be helpful for the future investigations in such a broad context. Furthermore, for the pipe factories current study can be effective at their designing procedure.

Measurement And Simulation Of X-Ray Emission From Multilayered Structures In Electron Probe Microanalysis.

1999 ◽  
Vol 5 (S2) ◽  
pp. 78-79
Author(s):  
C. Merlet ◽  
X. Llovet ◽  
F. Salvat
Keyword(s):  
Electron Probe ◽  
Numerical Models ◽  
Carbon Layer ◽  
Single Element ◽  
Surface Ionization ◽  
Copper Films ◽  
Multilayered Structures ◽  
X Ray ◽  
Electron Probe Microanalyzer ◽  
Quantitative Epma

Studies of x-ray emission from thin films on substrates using an electron probe microanalyzer (EPMA) provide useful information on the characteristics of x-ray generation by electron beams. In this study, EPMA measurements of multilayered samples were performed in order to test and improve analytical and numerical models used for quantitative EPMA. These models provide relatively accurate results for samples consisting of layers with similar average atomic numbers, because of their similar properties regarding electron transport and x-ray generation. On the contrary, these models find difficulties to describe the process when the various layers have very different atomic numbers. In a previous work, we studied the surface ionization of thin copper films of various thicknesses deposited on substrates with very different atomic numbers. In the present communication, the study is extended to the case of multilayered specimens.The studied specimens consisted of thin copper films deposited on a carbon layer which, in turn, was placed on a variety of single-element substrates, ranging from Be to Bi.

scholarly journals Structure and Characterization of TiC/GLC Multilayered Films with Various Bilayers Periods

Coatings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 787
Author(s):  
Weiqi Wang ◽  
Xiaoming Ling ◽  
Rui Wang ◽  
Wenhao Nie ◽  
Li Ji ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Chemical Compositions ◽  
Closed Field ◽  
Multilayered Structures ◽  
Multilayered Films ◽  
Sputtering Deposition ◽  
X Ray ◽  
Mechanical And Tribological Properties ◽  
Self Organizing

The spontaneously self-organizing multilayered graphite-like carbon (denoted as GLC) /TiC films with various bilayer periods in the range of 13.3–17.5 nm were deposited on silicon and 1Cr18Mn8Ni5N stainless steel substrates using closed field magnetron sputtering deposition facility. The microstructures and chemical compositions of the prepared multilayered films were characterized by scanning electron microscopy, high resolution transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy respectively. The self-organizing multilayered structures in all of the films consisted of titanium carbide layers and sp2-rich carbon layers periodically alternate arrangement. The TiC contents and bilayer periods of the multilayered films can be controlled by means of adjusting of sputtering current of graphite target. Furthermore, the mechanical and tribological performances of the prepared films were appraised by nano-indentor, scratch measures, and ball-on-plate tribometer respectively. The results indicated that multilayer structure endowed the as-deposited TiC/GLC films outstanding mechanical and tribological properties, especially the multilayer film with 15.9 nm bilayer period deposited at 10 A sputtering current showed the excellent adhesion strength and hardness; Simultaneously it also exhibited the lowest average friction coefficient in the humid environment owing to its high content of sp2 hybrid carbon.

Microstructural Evolution in Al-Ti Multilayered Film with Annealing

1999 ◽  
Vol 5 (S2) ◽  
pp. 836-837
Author(s):  
R. Mitra ◽  
W.A. Chiou ◽  
A.Madan ◽  
R. Hoffman ◽  
J.R. Weertman
Keyword(s):  
Magnetron Sputtering ◽  
Ingot Metallurgy ◽  
Multilayered Film ◽  
Multilayered Structures ◽  
Multilayered Films ◽  
Specific Strength ◽  
The Past ◽  
High Specific Strength ◽  
Significant Interest ◽  
Deposited Film

There has been a significant interest in the development of dispersion-hardened aluminum for many years for high specific strength and modulus. Such materials are usually processed by powder or ingot metallurgy routes. In this study, Al3 Ti dispersion hardened Al was obtained by annealing Al-Ti multilayers. Al-Ti multilayered films have been characterized in the past by observing the structure of the layers, as well as tensile properties and hardness. This paper reports the structure of Al-Ti multilayers and the evolution of matrix and dispersoid microstructure on annealing.The Al-Ti multilayered structures were prepared by magnetron sputtering using Al and Ti as targets and either Si (100) or NaCl as substrates. The bi-layer thickness was maintained around 16 nm with Ti constituting 12% of the total. The substrate was alternately moved below the Al and Ti targets for the purpose of deposition. The as-deposited film on the substrate and NaCl salts were annealed at 400°C for periods between 1 and 24 h in a vacuum (10−5 torr) furnace.

Sign in / Sign up

Export Citation Format

Share Document