Impact of lossy feed on S-parameter based envelope correlation coefficient

Author(s):  
Adam Narbudowicz ◽  
Max J. Ammann ◽  
Dirk Heberling
2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Zixian Yang ◽  
Hongchun Yang ◽  
Haijuan Cui

A compact printed MIMO antenna for mobile terminals is presented. With two planar antenna elements, the −6 dB impedance bandwidth of 2.32 GHz (1.48–3.8 GHz) is obtained, which covers GSM 1800/1900, UMTS, WLAN, Wimax, S-band, and most of LTE bands. Each antenna element with a small occupation of 15 × 20 mm2consists of a driven strip and a shorted strip. Two inverted C-shaped ground branches are introduced between two elements to improve the isolation. The simulated results are studied and the measured results show that high isolation of more than 18 dB at the entire operating band is achieved. Meanwhile, the impedance performance is also improved by adding the branches. Furthermore, the measured radiation performances and envelope correlation coefficient also demonstrate that the proposed antenna could be a good candidate for mobile terminals.


2015 ◽  
Vol 2015 ◽  
pp. 1-6
Author(s):  
Le Huy Trinh ◽  
Fabien Ferrero ◽  
Leonardo Lizzi ◽  
Jean-Marc Ribero ◽  
Robert Staraj

A 4 × 4 MIMO multiband antenna system for mobile handsets is proposed in this paper. The placement of the elements on the terminal chassis as well as the single structure has been optimized in order to reduce the Envelope Correlation Coefficient (ECC). Simulated and measured results, including also the integration with a a real 7-inch commercial tablet, aimed at validating the proposed solution are presented.


Author(s):  
Анубхав Кумар

В статье представлена компактная MIMO антенна с питанием копланарным волноводом для UWB устройств. Четырехэлементная антенна с питанием копланарным волноводом выполнена в виде излучателя. Развязка между элементами с одинаковой поляризацией и ортогонально поляризованными элементами составляет более 20 и 25 дБ, соответственно. Дополнительный элемент используется для улучшения развязки на более высокой частоте. Смоделированная и измеренная ширина полосы пропускания предложенной широкополосной UWB (ultra wideband) MIMO антенны, определяемая по входному сопротивлению IBW (impedance bandwidth) по уровню 10 дБ, составляет от 3,6 до 10,3 ГГц. Для предложенной антенны также смоделированы и/или измерены коэффициент отражения, развязка, диаграммы направленности, коэффициент корреляции по огибающей ECC (envelope correlation coefficient), полный активный коэффициент отражения TARC (total active reflection coefficient), коэффициент передачи при приеме на разнесенные антенны DG (diversity gain) и потери по пропускной способности канала CCL (channel capacity loss). Получены значения коэффициентов ECC Ј 0,0022, DG > 9,9 дБ, TARC имеет минимальные отклонения при различных углах, а CCL < 0,4 бит/с/Гц при ширине полосы пропускания, определяемой по входному сопротивлению, по уровню 10 дБ. Данная антенна может быть использована в портативных UWB устройствах.


Electronics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1307
Author(s):  
Omer Arabi ◽  
Chan Hwang See ◽  
Atta Ullah ◽  
Nazar Ali ◽  
Bo Liu ◽  
...  

A closely packed wideband multiple-input multiple-output (MIMO)/diversity antenna (of two ports) with a small size of less than 18.5 mm by 18.5 mm is proposed for mobile communication applications. The antenna can be orthogonally configured for corner installation or by placing it on a back-to-back structure for compact modules. To enhance the isolation and widen the bandwidth, the antenna is structured with multiple layers having differing dielectric constants. The feeding through a via significantly reduces the ground waves. A multi-fidelity surrogate model-assisted design exploration method is employed to obtain the optimized antenna geometric parameters efficiently. The antenna design was investigated using electromagnetic simulation and a physical realization of the optimal design was then created and subjected to a range of tests. The specific parameters investigated included reflection coefficients, mutual coupling between the input ports, radiation patterns, efficiency and parameters specific to MIMO behavior: envelope correlation coefficient and pattern diversity multiplexing coefficient. It was found that the antenna has an impedance bandwidth of approximately 4 GHz, mutual coupling between input ports of better than −18 dB and an envelope correlation coefficient of less than 0.002 across the operating band. This makes it a good candidate design for many mobile MIMO applications.


2021 ◽  
Vol 2096 (1) ◽  
pp. 012010
Author(s):  
E A Ischenko ◽  
Yu G Pasternak ◽  
V A Pendyurin ◽  
S M Fedorov

Abstract The article discusses a planar patch antenna with a metamaterial integrated into the structure, which allows the antenna to function in the upper Wi-Fi 5, 6 frequency range and the Wi-Fi 6E range. For the study, we built graphs of S-parameters, radiation patterns; on the basis of the resulting structure, we formed a MIMO antenna array for which we determined the main characteristics - the envelope correlation coefficient and the multiplexing efficiency


Author(s):  
С.М. Фёдоров ◽  
Е.А. Ищенко ◽  
И.А. Зеленин ◽  
Е.В. Папина ◽  
Е.Д. Меньшикова ◽  
...  

Рассматривается MIMO антенная решетка, сформированная из двух антенн Вивальди, которые должны обеспечить работу в частотном диапазоне, выделенном для сетей пятого поколения - 24,25-24,65 ГГц. Для определения основных параметров антенны применялось моделирование, на основе которого были установлены основные характеристики MIMO антенной решетки: коэффициент корреляции огибающей, коэффициент усиления при разнесенном режиме, эффективность сложения. По результатам было определено, что при расстоянии между антеннами в 6,13 мм достигаются максимально возможные характеристики MIMO антенной решетки, а для стабильного функционирования достаточным является расстояние в 2,45 мм. В статье приводятся размеры исследуемой антенны, графики обратных потерь (S - параметров), диаграммы направленности, коэффициентов корреляции огибающих, коэффициента усиления при разнесенном режиме, эффективности сложения при различных расстояниях между антенными элементами. Обеспечение стабильности работы MIMO антенной решетки является важной задачей, так как все современные системы связи используют эту технологию для реализации многоканальной передачи, а следовательно, для повышения скорости передачи информации. Для определения геометрических характеристик и выполнения моделирования применялось специализированное программное обеспечение The article discusses a MIMO antenna array formed of two Vivaldi antennas, which should provide operation in the frequency range allocated for fifth generation networks - 24.25-24.65 GHz. To determine the main parameters of the antenna, we applied modeling, on the basis of which we determined the main characteristics of the MIMO antenna array: the envelope correlation coefficient, the diversity gain, the multiplexing efficiency. According to the results, we determined that with a distance between antennas of 6.13 mm, the maximum possible characteristics of a MIMO antenna array are achieved, and a distance of 2.45 mm is sufficient for stable operation. The article gives the dimensions of the antenna under study, graphs of return loss (S11 - parameters), radiation patterns, envelope correlation coefficient, diversity gain, multiplexing efficiency at different distances between the antenna elements. Ensuring the stability of the MIMO antenna array is an important task since all modern communication systems use this technology to implement multichannel transmission, and, consequently, to increase the information transfer rate. We used specialized software to determine geometric characteristics and perform modeling


Sign in / Sign up

Export Citation Format

Share Document