scholarly journals Compact Wideband MIMO Diversity Antenna for Mobile Applications Using Multi-Layered Structure

Electronics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1307
Author(s):  
Omer Arabi ◽  
Chan Hwang See ◽  
Atta Ullah ◽  
Nazar Ali ◽  
Bo Liu ◽  
...  
Keyword(s):  
Correlation Coefficient ◽  
Mutual Coupling ◽  
Multiple Input Multiple Output ◽  
Dielectric Constants ◽  
Impedance Bandwidth ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Diversity Antenna ◽  
Better Than ◽  
Envelope Correlation

A closely packed wideband multiple-input multiple-output (MIMO)/diversity antenna (of two ports) with a small size of less than 18.5 mm by 18.5 mm is proposed for mobile communication applications. The antenna can be orthogonally configured for corner installation or by placing it on a back-to-back structure for compact modules. To enhance the isolation and widen the bandwidth, the antenna is structured with multiple layers having differing dielectric constants. The feeding through a via significantly reduces the ground waves. A multi-fidelity surrogate model-assisted design exploration method is employed to obtain the optimized antenna geometric parameters efficiently. The antenna design was investigated using electromagnetic simulation and a physical realization of the optimal design was then created and subjected to a range of tests. The specific parameters investigated included reflection coefficients, mutual coupling between the input ports, radiation patterns, efficiency and parameters specific to MIMO behavior: envelope correlation coefficient and pattern diversity multiplexing coefficient. It was found that the antenna has an impedance bandwidth of approximately 4 GHz, mutual coupling between input ports of better than −18 dB and an envelope correlation coefficient of less than 0.002 across the operating band. This makes it a good candidate design for many mobile MIMO applications.

Compact UWB–MIMO antenna with quad-band-notched characteristic

2016 ◽  
Vol 9 (5) ◽  
pp. 1147-1153 ◽  
Author(s):  
Ling Wu ◽  
Yingqing Xia
Keyword(s):  
Correlation Coefficient ◽  
Radiation Pattern ◽  
Mimo System ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Mimo Antenna ◽  
X Band ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Better Than

With quad-band-notched characteristic, a compact ultrawideband (UWB) multiple-input-multiple-output (MIMO) antenna is introduced in the paper. The UWB–MIMO system has two similar monopole elements and occupies 30 × 45 mm2. By inserting two L-shaped slots, CSRR and C-shaped stubs, four notched bands are achieved (3.25–3.9, 5.11–5.35, 5.5–6.06, and 7.18–7.88 GHz) to filter WiMAX, lower WLAN, upper WLAN, and X-band. Meanwhile, the isolation is obviously enhanced with three metal strips on the ground plane. Results indicate that the antenna covers UWB frequency band of 3.1 – 10.6 GHz except four rejected bands, isolation of better than −18 dB, envelope correlation coefficient of <0.02, and good radiation pattern, thus making it useful for UWB systems.

Compact 4-Port MIMO/Diversity Antenna with Low Correlation for UWB Application

Frequenz ◽  
2018 ◽  
Vol 72 (9-10) ◽  
pp. 429-435 ◽  
Author(s):  
Rohit Mathur ◽  
Santanu Dwari
Keyword(s):  
Group Delay ◽  
Multiple Input Multiple Output ◽  
Polarization Diversity ◽  
Mimo Antenna ◽  
S Parameter ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Diversity Antenna ◽  
Better Than

Abstract A compact four port multiple-input-multiple-output (MIMO) antenna with polarization diversity for ultrawideband (UWB) application is proposed. The antenna contains four monopoles where each monopole has three concentric rings. Orthogonal arrangement of monopoles of the antenna provides good isolation and polarization diversity. The antenna has compact size of 36×36×1.6 mm3. It operates in the frequency band of 3.2 to 11 GHz where isolation is better than 15 dB. The envelop correlation coefficient (ECC) and diversity gain from S-parameter have been calculated to evaluate MIMO performance of the antenna. In addition to ensure distortion less transmission in UWB group delay is also calculated.

scholarly journals Design of SWB MIMO Antenna with Extremely Wideband Isolation

Electronics ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 194 ◽  
Author(s):  
Habib Ullah ◽  
Saeed Ur Rahman ◽  
Qunsheng Cao ◽  
Ijaz Khan ◽  
Hamid Ullah
Keyword(s):  
Mutual Coupling ◽  
Multiple Input Multiple Output ◽  
Wide Band ◽  
Impedance Bandwidth ◽  
Frequency Range ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Swb Applications ◽  
Compact Planar

This paper presents a compact planar multiple input multiple output (MIMO) antenna for super wide band (SWB) applications. The presented MIMO antenna comprises two identical patches on the same substrate. Dimensions of the MIMO antenna are 0.17λ × 0.20λ × 0.006λ mm3, with respect to the lowest resonance of 1.30 GHz. The SWB antenna was manufactured using F4B substrate having a dielectric constant of 2.65 that provides a percent impedance bandwidth and bandwidth ratio of 187% and 30.76:1, respectively. The mutual coupling between the antenna elements is suppressed by placing a T-shaped corrugated strip in the mid of two antenna elements. The proposed MIMO antenna exhibits maximum diversity gain of 10 dB, low mutual coupling (<−20 dB), low envelope correlation coefficient (ECC < 0.02), efficiency >80%, and low reflection coefficient (<−10 dB) in the SWB frequency range (1.30 GH–40 GHz). The presented antenna is a good candidate for SWB applications. The designed antenna has been experimentally validated, and the simulated results were also verified.

scholarly journals A New CPW-Fed Diversity Antenna for MIMO 5G Smartphones

Electronics ◽  
2020 ◽  
Vol 9 (2) ◽  
pp. 261 ◽  
Author(s):  
Naser Ojaroudi Parchin ◽  
Haleh Jahanbakhsh Basherlou ◽  
Yasir I. A. Al-Yasir ◽  
Ahmed M. Abdulkhaleq ◽  
Mohammad Patwary ◽  
...  
Keyword(s):  
Coplanar Waveguide ◽  
Multiple Input Multiple Output ◽  
Antenna Design ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Good Potential ◽  
And Performance ◽  
Diversity Antenna ◽  
Better Than

In this study, a new coplanar waveguide (CPW)-fed diversity antenna design is introduced for multiple-input–multiple-output (MIMO) smartphone applications. The diversity antenna is composed of a double-fed CPW-fed antenna with a pair of modified T-ring radiators. The antenna is designed to cover the frequency spectrum of commercial sub-6 GHz 5G communication (3.4–3.8 and 3.8–4.2 GHz). It also provides high isolation, better than −16 dB, without an additional decoupling structure. It offers good potential to be deployed in future smartphones. Therefore, the characteristics and performance of an 8-port 5G smartphone antenna were investigated using four pairs of the proposed diversity antennas. Due to the compact size and also the placement of the elements, the presented CPW-fed smartphone antenna array design occupies a very small part of the smartphone board. Its operation band spans from 3.4 to 4.4 GHz. The simulated results agree well with measured results, and the performance of the smartphone antenna design in the presence of a user is given in this paper as well. The proposed MIMO design provides not only sufficient radiation coverage supporting different sides of the mainboard but also polarization diversity.

scholarly journals Mutual Coupling Reduction of DRA for MIMO Applications

2019 ◽  
Vol 8 (1) ◽  
pp. 75-81
Author(s):  
N. Al Shalaby ◽  
S. G. El-Sherbiny
Keyword(s):  
Mutual Coupling ◽  
Dielectric Material ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Parasitic Element ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Element Method

In this paper, A multiple input Multiple Output (MIMO) antenna using two Square Dielectric Resonators (SDRs) is introduced. The mutual coupling between the two SDRAs is reduced using two different methods; the first method is based on splitting a spiral slot in the ground plane, then filling the slot with dielectric material, "E.=2.2". The second method is based on inserting a copper parasitic element, having the same shape of the splitted Spiral, between the two SDRAs.  The effect of replacing the copper parasitic element with Carbon nanotubes (CNTs) parasitic element "SOC12 doped long-MWCNT BP" is also studied. The antenna system is designed to operate at 6 GHz. The analysis and simulations are carried out using finite element method (FEM). The defected ground plane method gives a maximum isolation of l8dB at element spacing of 30mm (0.6λo), whereas the parasitic element method gives a maximum isolation of 42.5dB at the same element spacing.

scholarly journals Minimization of Mutual Coupling Using Neutralization Line Technique for 2.4 GHz Wireless Applications

2015 ◽  
Vol 6 (3) ◽  
pp. 1-15 ◽  
Author(s):  
Wan Noor Najwa Wan Marzudi ◽  
Zuhairiah Zainal Abidin ◽  
Siti Zarina Mohd Muji ◽  
Yue Ma ◽  
Raed A. Abd-Alhameed
Keyword(s):  
Reflection Coefficient ◽  
Mutual Coupling ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
Wireless Applications ◽  
Input Multiple Output ◽  
Neutralization Line

This paper presented a planar printed multiple-input-multiple-output (MIMO) antenna with a dimension of 100 x 45 mm2. It composed of two crescent shaped radiators placed symmetrically with respect to the ground plane. Neutralization line applied to suppress mutual coupling. The proposed antenna examined both theoretically and experimentally, which achieves an impedance bandwidth of 18.67% (over 2.04-2.46 GHz) with a reflection coefficient < -10 dB and mutual coupling minimization of < -20 dB. An evaluation of MIMO antennas is presented, with analysis of correlation coefficient, total active reflection coefficient (TARC), capacity loss and channel capacity. These characteristics indicate that the proposed antenna suitable for some wireless applications.

scholarly journals A MIMO H-shape Dielectric Resonator Antenna for 4G Applications

2018 ◽  
Vol 10 (2) ◽  
pp. 648
Author(s):  
S. Salihah ◽  
M. H. Jamaluddin ◽  
R. Selvaraju ◽  
M. N. Hafiz
Keyword(s):  
Electrical Properties ◽  
Dielectric Resonator ◽  
Return Loss ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Good Potential ◽  
Slot Coupling

In this article, a Multiple-Input-Multiple-Output (MIMO) H-shape Dielectric Resonator Antenna (DRA) is designed and simulated at 2.6 GHz for 4G applications. The proposed structure consists of H-shape DRA ( =10) which is mounted on FR4 substrate ( =4.6), and feed by two different feeding mechanisms. First, microstrip with slot coupling as Port 1. Second, coaxial probe as Port 2. The electrical properties of the proposed MIMO H-shape DRA in term of return loss, bandwidth and gain are completely obtained by using CST Microwave Studio Suite Software. The simulated results demonstrated a return loss more than 20 dB, an impedance bandwidth of 26 % (2.2 – 2.9 GHz), and gain of 6.11 dBi at Port 1. Then, a return loss more than 20 dB, an impedance bandwidth of 13 % (2.2 – 2.7 GHz), and gain of 6.63 dBi at Port 2. Both ports indicated impedance bandwidth more than 10 %, return loss lower than 20 dB, and gain more than 10 dBi at 2.6 GHz. The simulated electrical properties of the proposed design show a good potential for LTE applications.

UWB MIMO antenna with common radiator

2016 ◽  
Vol 9 (3) ◽  
pp. 573-580 ◽  
Author(s):  
Garima Srivastava ◽  
B. K. Kanuijia ◽  
Rajeev Paulus
Keyword(s):  
Low Cost ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Rectangular Slot ◽  
Mimo Antenna ◽  
Circular Patch ◽  
Capacity Loss ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output

A compact printed 2 × 2 ultrawideband (UWB) multiple input multiple output (MIMO) antenna with a single circular patch as a common radiator for both the antenna elements is presented in this paper. A single circular patch is excited by two tapered CPW feeds for dual polarization. To improve the isolation between two ports, a rectangular slot of dimension L1 × W1 is created in the radiator. The UWB MIMO antenna has impedance bandwidth of 3–12 GHz with a isolation better than 17 dB between the two ports. The envelope correlation coefficient and the capacity loss are evaluated to ensure the good diversity performance of UWB MIMO antenna. The antenna has a compact size of 45 × 45 mm2 and is fabricated on low cost FR4 substrate and measured using Agilent VNA. The simulated and measured results show that the proposed UWB antenna is good candidate for UWB MIMO applications.

A Superwideband Monopole Multiple-Input-Multiple-Output (MIMO) Antenna with Dual Notched (Inverted T-Shaped Stub/U-Shaped Slit) Band Characteristics for Wireless Applications

2019 ◽  
Vol 16 (10) ◽  
pp. 4242-4248
Author(s):  
Manoj Kapil ◽  
Manish Sharma
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Wireless Applications ◽  
Research Article ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Microstrip Feed

In this research article, a compact MIMO (Multiple-Input-Multiple-Output) antenna with inclusion of two notched bands characteristics is presented. Designed MIMO antenna consist of dual radiating patches printed on one surface of the substrate which covers measured wide impedance bandwidth of 2.88 GHz–19.98 GHz and satisfies bandwidth ratio more than 10:1 for superwideband with compact size of 18 mm × 34 mm. Two radiating patch are placed symmetrically for MIMO configuration and notched bands to eliminate WiMAX/C and WLAN bands are obtained by attaching inverted T-shaped stub on radiating patch and etched inverted U-shape slit in microstrip feed. Isolation between the two radiating patch is maintained by adding two L-shaped stub in slotted rectangular ground plane. Measured radiation pattern are stable in operating band and offers maximum 4.23 dBi and 89% gain and radiation efficiency respectively. Moreover, antenna shows good diversity performance with Envelope-Correlation-Coefficient (ECC) < 0.5, Directive-Gain (DG) > 9.95 dB and Total-Active-Reflection Coefficient (TARC) < -30 dB.

Sign in / Sign up

Export Citation Format

Share Document