Online experiments of controlling nuclear reactor power with fuzzy logic

Author(s):  
Da Ruan
Author(s):  
P C Chiu ◽  
E H K Fung

A triple heat exchanger, so called because there are three heat exchange processes taking place in it, was built to simulate the system behaviour of a nuclear reactor power plant or a solar heating plant which is characterized by the two circulating loops of the fluid flow. Experiments were carried out to study the temperature transients under disturbances in secondary fluid inlet temperature and power output from immersion heaters. Numerical results were obtained from the weighted residual formulation of the proposed dynamic model and they were shown to be in general agreement with the two sets of experimental responses.


2022 ◽  
Vol 169 ◽  
pp. 108931
Author(s):  
Jiaoshen Xu ◽  
Hui Tang ◽  
Xin Wang ◽  
Ge Qin ◽  
Xin Jin ◽  
...  

Author(s):  
Xie Yang ◽  
Lei Shi

Differing from the adoption of helium as working fluid of closed Brayton cycle (CBC) for terrestrial high temperature gas cooled reactor (HTGR) power plants, helium-xenon mixture with a proper molar weight was recommended as working fluid for space nuclear reactor power with CBC conversion. It is essential to figure out how the component of helium-xenon mixture affects the net system efficiency, in order to provide reference for the selection of appropriate cycle working fluid. After a discussion of the physical properties of different helium-xenon mixtures, the related physical properties are studied to analyze their affection on the key parameters of CBC, including adiabatic coefficient, recuperator effectiveness and normalized pressure loss coefficient. Then the comprehensive thermodynamics of CBC net system efficiency is studied in detail considering different helium-xenon mixtures. The physical properties study reveals that at 0.7 MPa and 400 K, the adiabatic coefficient of helium-xenon mixture increases with increased molar weight, from 0.400 (pure helium) to 0.414 (pure xenon), while recuperator effectiveness firstly increases and then decreases with the increase of molar weight, and the normalized pressure loss coefficient increases monotonically with molar weight increases. The thermodynamic analysis results show that the adiabatic coefficient has less effect on the net system efficiency, while the net system efficiency increases with increased recuperator effectiveness, and the net system efficiency decreases with normalized pressure loss coefficient increases. Finally, the mixture of helium-8.6% xenon was adopted as working fluid, instead of pure helium, for ensuring less turbine mechanicals (turbine and compressor) stages, and resulting maximum recuperator effectiveness. At the given cold / hot side temperature of 400 / 1300 K, the net system efficiency can reach 29.18% theoretically.


Author(s):  
Xiaomeng Dong ◽  
Zhijian Zhang ◽  
Zhaofei Tian ◽  
Lei Li ◽  
Guangliang Chen

Multi-physics coupling analysis is one of the most important fields among the analysis of nuclear power plant. The basis of multi-physics coupling is the coupling between neutronics and thermal-hydraulic because it plays a decisive role in the computation of reactor power, outlet temperature of the reactor core and pressure of vessel, which determines the economy and security of the nuclear power plant. This paper develops a coupling method which uses OPENFOAM and the REMARK code. OPENFOAM is a 3-dimension CFD open-source code for thermal-hydraulic, and the REMARK code (produced by GSE Systems) is a real-time simulation multi-group core model for neutronics while it solves diffusion equations. Additionally, a coupled computation using these two codes is new and has not been done. The method is tested and verified using data of the QINSHAN Phase II typical nuclear reactor which will have 16 × 121 elements. The coupled code has been modified to adapt unlimited CPUs after parallelization. With the further development and additional testing, this coupling method has the potential to extend to a more large-scale and accurate computation.


Sign in / Sign up

Export Citation Format

Share Document