Research on high-speed railway PC continuous girder bridge creep and shrinkage

2011 ◽  
Author(s):  
Jiang A-lan ◽  
Yao Chang-jian
Keyword(s):  
High Speed ◽  
High Speed Railway ◽  
Continuous Girder Bridge ◽  
Girder Bridge ◽  
Creep And Shrinkage

scholarly journals High-Speed Train-Track-Bridge Dynamic Interaction considering Wheel-Rail Contact Nonlinearity due to Wheel Hollow Wear

2019 ◽  
Vol 2019 ◽  
pp. 1-18 ◽  
Author(s):  
Chao Chang ◽  
Liang Ling ◽  
Zhaoling Han ◽  
Kaiyun Wang ◽  
Wanming Zhai
Keyword(s):  
High Speed ◽  
Synthesis Method ◽  
Dynamic Interaction ◽  
High Speed Train ◽  
Train Track ◽  
High Speed Railway ◽  
Long Span ◽  
Continuous Girder Bridge ◽  
Girder Bridge ◽  
Track Bridge

Wheel hollow wear is a common form of wheel-surface damage in high-speed trains, which is of great concern and a potential threat to the service performance and safety of the high-speed railway system. At the same time, rail corridors in high-speed railways are extensively straightened through the addition of bridges. However, only few studies paid attention to the influence of wheel-profile wear on the train-track-bridge dynamic interaction. This paper reports a study of the high-speed train-track-bridge dynamic interactions under new and hollow worn wheel profiles. A nonlinear rigid-flexible coupled model of a Chinese high-speed train travelling on nonballasted tracks supported by a long-span continuous girder bridge is formulated. This modelling is based on the train-track-bridge interaction theory, the wheel-rail nonelliptical multipoint contact theory, and the modified Craig–Bampton modal synthesis method. The effects of wheel-rail nonlinearity caused by the wheel hollow wear are fully considered. The proposed model is applied to predict the vertical and lateral dynamic responses of the high-speed train-track-bridge system under new and worn wheel profiles, in which a high-speed train passing through a long-span continuous girder bridge at a speed of 350 km/h is considered. The numerical results show that the wheel hollow wear changes the geometric parameters of the wheel-rail contact and then deteriorates the train-track-bridge interactions. The worn wheels can increase the vibration response of the high-speed railway bridges.

scholarly journals Mechanical Performance of a Ballastless Track System for the Railway Bridges of High-Speed Lines: Experimental and Numerical Study under Thermal Loading

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2876
Author(s):  
Yingying Zhang ◽  
Lingyu Zhou ◽  
Akim D. Mahunon ◽  
Guangchao Zhang ◽  
Xiusheng Peng ◽  
...  
Keyword(s):  
High Speed ◽  
Thermal Loading ◽  
Mechanical Performance ◽  
Track Structure ◽  
Box Girder ◽  
High Speed Railway ◽  
Ballastless Track ◽  
Track System ◽  
Girder Bridge ◽  
Track Slab

The mechanical performance of China Railway Track System type II (CRTS II) ballastless track suitable for High-Speed Railway (HSR) bridges is investigated in this project by testing a one-quarter-scaled three-span specimen under thermal loading. Stress analysis was performed both experimentally and numerically, via finite-element modeling in the latter case. The results showed that strains in the track slab, in the cement-emulsified asphalt (CA) mortar and in the track bed, increased nonlinearly with the temperature increase. In the longitudinal direction, the zero-displacement section between the track slab and the track bed was close to the 1/8L section of the beam, while the zero-displacement section between the track slab and the box girder bridge was close to the 3/8L section. The maximum values of the relative vertical displacement between the track bed and the bridge structure occurred in the section at three-quarters of the span. Numerical analysis showed that the lower the temperature, the larger the tensile stresses occurring in the different layers of the track structure, whereas the higher the temperature, the higher the relative displacement between the track system and the box girder bridge. Consequently, quantifying the stresses in the various components of the track structure resulting from sudden temperature drops and evaluating the relative displacements between the rails and the track bed resulting from high-temperature are helpful in the design of ballastless track structures for high-speed railway lines.

Dynamic Performance Analysis on High-Speed Railway Continuous Girder Bridge

2011 ◽  
Vol 280 ◽  
pp. 186-190
Author(s):  
Shou Tan Song ◽  
Ji Wen Zhang ◽  
Xin Yuan
Keyword(s):  
High Speed ◽  
Moving Load ◽  
Damping Ratio ◽  
Dynamic Performance ◽  
Wheel Load ◽  
Dynamic Coefficients ◽  
Bridge Structures ◽  
Continuous Girder Bridge ◽  
Girder Bridge ◽  
Dynamic Performance Analysis

The dynamic performance of continuous girder under the train in a series of speed is studied through examples, and the main conclusions are given in the following. The resonance mechanism of continuous girder is similar to simply supported beam. The vehicle wheel load forms regular moving load series, which induces periodical action and resonance of the bridge. The damping ratio of bridge itself has less effect on the amplitude at the loading stage, but significant effects appear when the load departs from the bridge. The count of continuous spans also has less impact on the dynamic coefficients, so three continuous spans can be adopted for calculation and analysis. Span and fundamental frequency have significant influence on dynamic coefficients of bridge structures. To extend the span of the bridge structure can reduce the dynamic coefficient while keeping its frequency invariant. The fundamental frequencies of different bridges are corresponding to certain resonant speeds, which calls for the attention in the design.

Effects of CRTS II Unballasted Track on Seismic Response of High-Speed Railway Bridge

2014 ◽  
Vol 584-586 ◽  
pp. 2099-2104 ◽  
Author(s):  
Yong Liang Zhang ◽  
Pei Shan Wang ◽  
Ji Dong Zhao
Keyword(s):  
Seismic Response ◽  
High Speed ◽  
Response Analysis ◽  
Railway Bridge ◽  
High Speed Railway ◽  
Bridge Model ◽  
Longitudinal Stiffness ◽  
Girder Bridge ◽  
Transitional Section ◽  
Earthquake Response Analysis

Based on properties of high-speed railway bridge and rail system restraints, the rail-bridge model is established by considering CRTS II unballasted track and bridge structure. The results show that the effect of CRTS II system restraints on seismic response for multi-span simply supported girder bridge is greater so the rail-bridge model should be adopted in earthquake response analysis. Due to the effect of longitudinal stiffness of the railway and bridge transitional section such as terminal spine, the more significant is unloading for seismic response of the side piers if the fewer is the number for the rear-structure spans.

Sign in / Sign up

Export Citation Format

Share Document