Calculation of the optimal parameters of dynamic vibration absorber in consideration of the damper of primary vibration system

2015 ◽  
Author(s):  
Xiaolong Zhang ◽  
Yabin Dong ◽  
Yumin He
Keyword(s):  
Vibration Absorber ◽  
Vibration System ◽  
Optimal Parameters ◽  
Dynamic Vibration Absorber ◽  
Dynamic Vibration

scholarly journals Are Single Polymer Network Hydrogels with Chemical and Physical Cross-Links a Promising Dynamic Vibration Absorber Material? A Simulation Model Inquiry

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5127
Author(s):  
Leif Kari
Keyword(s):  
Simulation Model ◽  
Loss Factor ◽  
Polymer Network ◽  
Vibration Absorber ◽  
Vibration System ◽  
Frequency Range ◽  
Dynamic Vibration Absorber ◽  
High Loss ◽  
Dynamic Vibration ◽  
Cross Links

Tough, doubly cross-linked, single polymer network hydrogels with both chemical and physical cross-links display a high loss factor of the shear modulus over a broad frequency range. Physically, the high loss factor is resulting from the intensive adhesion–deadhesion activities of the physical cross-links. A high loss factor is frequently required by the optimization processes for optimal performance of a primary vibration system while adopting a dynamic vibration absorber, in particular while selecting a larger dynamic vibration absorber mass in order to avoid an excess displacement amplitude of the dynamic vibration absorber springs. The novel idea in this paper is to apply this tough polymer hydrogel as a dynamic vibration absorber spring material. To this end, a simulation model is developed while including a suitable constitutive viscoelastic material model for doubly cross-linked, single polymer network polyvinyl alcohol hydrogels with both chemical and physical cross-links. It is shown that the studied dynamic vibration absorber significantly reduces the vibrations of the primary vibration system while displaying a smooth frequency dependence over a broad frequency range, thus showing a distinguished potential for the tough hydrogels to serve as a trial material in the dynamic vibration absorbers in addition to their normal usage in tissue engineering.

scholarly journals Optimal parameters of dynamic vibration absorber for linear damped rotary systems subjected to harmonic excitation

2020 ◽  
Author(s):  
Vu Duc Phuc ◽  
Tong Van Canh ◽  
Pham Van Lieu
Keyword(s):  
Vibration Suppression ◽  
Fixed Point Theory ◽  
Damping Ratio ◽  
Harmonic Excitation ◽  
Tuning Parameter ◽  
Vibration Absorber ◽  
Optimal Parameters ◽  
Dynamic Vibration Absorber ◽  
Practical Applications ◽  
Dynamic Vibration

Dynamic vibration absorber (DVA) is a simple and effective device for vibration absorption used in many practical applications. Determination of suitable parameters for DVA is of significant importance to achieve high vibration reduction effectiveness. This paper presents a   method to find the optimal parameters of a DVA attached to a linear damped rotary system excited by harmonic torque. To this end, a closed-form formula for the optimum tuning parameter is derived using the fixed-point theory based on an assumption that the damped rotary systems are lightly or moderately damped. The optimal damping ratio of DVA is found by solving a set of non-linear equations established by the Chebyshev's min-max criterion. The performance of the proposed optimal DVA is compared with that obtained by existing optimal solution in literature. It is shown that the proposed optimal parameters are possible to obtain superior vibration suppression compared to existing optimal formula. Extended simulations are carried out to examine the performance of the optimally designed DVA and the sensitivity of the optimum parameters. The simulation results show that the improvement of the vibration performance on damped rotary system can be as much as 90% by using DVA.

scholarly journals A PROCEDURE FOR OPTIMAL DESIGN OF A DYNAMIC VIBRATION ABSORBER INSTALLED IN THE DAMPED PRIMARY SYSTEM BASED ON TAGUCHI’S METHOD

2018 ◽  
Vol 56 (5) ◽  
Author(s):  
Nguyen Van Khang
Keyword(s):  
Optimal Design ◽  
Vibration Absorber ◽  
Primary System ◽  
Taguchi’S Method ◽  
Optimal Parameters ◽  
Dynamic Vibration Absorber ◽  
Dynamic Vibration ◽  
Comparison Results

The dynamic vibration absorber (DVA) has been widely applied in various technical fields. This paper presents a  procedure for designing the optimal parameters of  a dynamic vibration absorber attached to a damped primary system. The values of the optimal parameters of the DVA obtained by the Taguchi’s method are compared by the results obtained by other methods. The comparison results show the advantages of the procedure presented in this study

Optimization design for multiple dynamic vibration absorbers on damped structures using equivalent linearization method

2021 ◽  
pp. 146441932110535
Author(s):  
Vu Duc Phuc ◽  
Van-The Tran
Keyword(s):  
Linearization Method ◽  
Equivalent Linearization ◽  
Vibration Absorber ◽  
Vibration Absorbers ◽  
Optimal Parameters ◽  
Dynamic Vibration Absorber ◽  
Dynamic Vibration ◽  
Dynamic Vibration Absorbers ◽  
Equivalent Linearization Method ◽  
Primary Structures

The dynamic vibration absorber and tuned mass damper are widely used to suppress harmful vibration of the damped structures under external excitation. The multiple dynamic vibration absorbers have more benefit than the single dynamic vibration absorber. The multiple dynamic vibration absorbers are portability and easy to install because its size is significantly reduced compared to an individual damper. This paper proposes a design method to obtain optimal parameters of multiple dynamic vibration absorbers attached on damped primary structures by using the least squares estimation of equivalent linearization method. An explicit expression of damping ratio and tuning parameters of multiple dynamic vibration absorbers are determined for minimizing the maximum displacement of the primary structures based on the fixed-point theory. The new contribution is provided a reliable theoretical basis for optimizing parameters of the multiple dynamic vibration absorbers that are attached on the damped primary structures. The numerical results reveal the effectiveness of the proposed optimal parameters of multiple dynamic vibration absorbers in reduce vibration of damped primary structures. In the practical applications, this research results allow to divide a large dynamic vibration absorber into many equivalent small dynamic vibration absorbers, which are convenient for manufacturing and installing on the damped primary structures such as high buildings and cable-stayed bridges.

Damping of vibration of the car suspension at resonance

2021 ◽  
pp. 3-8
Author(s):  
Keyword(s):  
Mathematical Model ◽  
Block Diagram ◽  
Vibration Absorber ◽  
Optimal Parameters ◽  
Dynamic Vibration Absorber ◽  
Vibration Absorption ◽  
Dynamic Vibration ◽  
Car Suspension ◽  
Dynamic Damping ◽  
Dynamic Absorber

A block diagram of the device has been developed, which is based on the principle of dynamic vibration absorption. The design of a dynamic absorber of car suspension vibrations is considered. A mathematical model of a car suspension with a dynamic vibration absorber and the results of its numerical simulation are presented. The analysis of the results obtained makes it possible to determine the optimal parameters of the device for a dynamic vibration absorber. Keywords: suspension, car, dynamic, damping, vibration, mathematical, model, analysis, parameters

149 Vibration Suppression of Tilted Vibration System by Dynamic Vibration Absorber with Two Rollers

2004 ◽  
Vol 2004 (0) ◽  
pp. _149-1_-_149-6_
Author(s):  
Yilin SONG ◽  
Hidenori SATO ◽  
Yoshio IWATA ◽  
Toshihiko KOMATSZAKI ◽  
Yoshiyuki KISHIMOTO
Keyword(s):  
Vibration Suppression ◽  
Vibration Absorber ◽  
Vibration System ◽  
Dynamic Vibration Absorber ◽  
Dynamic Vibration

Suppressing Random Response of a Regular Structure by an Inerter-Based Dynamic Vibration Absorber

2019 ◽  
Vol 141 (4) ◽  
Author(s):  
Xiaoling Jin ◽  
M. Z. Q. Chen ◽  
Zhilong Huang
Keyword(s):  
Kinetic Energy ◽  
Random Vibration ◽  
Optimal Location ◽  
Vibration Absorber ◽  
Optimal Parameters ◽  
Dynamic Vibration Absorber ◽  
Dynamic Vibration ◽  
Straight Beam ◽  
The Mean ◽  
Mean Kinetic Energy

This paper concentrates on the random vibration suppression of a regular straight beam by using an inerter-based dynamic vibration absorber. For a wideband random point-driven straight beam with an inerter-based dynamic vibration absorber, the distribution of mean-square velocity response along the axis of the straight beam as well as the mean kinetic energy of the whole beam are first analytically derived through the classical linear random vibration theory. Two optimization objectives are established to determine the optimal design parameters: (1) minimizing the maximal mean-square velocity along the axis of the straight beam, which corresponds to the maximal mean kinetic energy density along the axis and (2) minimizing the mean kinetic energy of the whole beam. Numerical search gives the optimal location and the associated optimal parameters of the inerter-based dynamic vibration absorber. Numerical results for a simply supported straight beam illustrate the better performance of an inerter-based dynamic vibration absorber than a traditional dynamic vibration absorber. Parametric sensitivity studies for the robustness analysis of the beam response to deviations from the optimal parameters are conducted. The optimal location locates on the force-excited point, while the suboptimal location locates on its symmetry position. Furthermore, the optimal and suboptimal locations remain invariable regardless of the upper cutoff frequency of band-limited noise, which is fairly important to the location optimization of the inerter-based dynamic vibration absorber.

Optimal design of inerter-based isolators minimizing the compliance and mobility transfer function versus harmonic and random ground acceleration excitation

2020 ◽  
pp. 107754632094017
Author(s):  
Marcial Baduidana ◽  
Aurelien Kenfack-Jiotsa
Keyword(s):  
Transfer Function ◽  
Vibration Absorber ◽  
Engineering Practice ◽  
Primary System ◽  
Optimal Parameters ◽  
Dynamic Vibration Absorber ◽  
Ground Acceleration ◽  
Dynamic Vibration ◽  
Optimum Parameters ◽  
Peak Value

This study is concerned with the problem of analysis and optimization of inerter-based systems. A main inerter system is generally composed of an inerter, a spring, and viscous damper. Series – parallel inerter system s and series inerter system s are two commonly used configurations of inerter-based system s . First , in this study , the H∞ optimum parameters of inerter-based isolators are derived to minimize the compliance and mobility transfer function of a single-degree -of-freedom system under a harmonic ground acceleration excitation. Under the optimum tuning condition, it is shown that the proposed inerter-based isolators when compared with the traditional dynamic vibration absorber provide larger suppression of the peak value of the magnitude of compliance and mobility transfer function s of the primary system. For the studied cases, more than 40% and 45% improvement can be attained in terms of minimizing the compliance and mobility transfer function s , respectively, as compared with the traditional dynamic vibration absorber for the series – parallel inerter system and 15% and 11% improvement can be attained respectively , for the series inerter system . Finally, further comparison between the inerter-based isolators and traditional dynamic vibration absorber under white noise excitation also shows that the series – parallel inerter system and series inerter system s are superior to the traditional dynamic vibration absorber . The results of the studied systems show that m ore than 23% and 16% improvement are attained in terms of minimizing the compliance and mobility transfer function s respectively , as compared with the traditional dynamic vibration absorber for the series – parallel inerter system and 26% and 13% improvement can be attained respectively , for the series inerter system . The optimal parameters for different cases are obtained. It is shown that the optimal parameters obtained using the minimized mobility transfer function are smaller than those using the compliance transfer function at all mass ratios or inertance-to-mass ratio. The results of this study can provide theoretical basis for design of the optimal inerter-based isolators in engineering practice.

Sign in / Sign up

Export Citation Format

Share Document