Research on Chinese electrovalent subsidy policy for biomass energy electricity generation industry

Author(s):  
Xu Xiao-heng ◽  
Li Zhen
Author(s):  
Talip Arsu

Electricity generation, one of the renewable energy sources (RES), delivers a solution for various problems such as energy efficiency, energy supply security, reducing foreign dependency, and especially, environmental concerns. However, the solutions provided for these problems bring along the question of which RESs are produced more effectively. Therefore, in this research, RESs used for electricity generation in Turkey were analyzed by using generation data to show which one is more effective. Bi-objective multiple-criteria data envelopment analysis (BiO-MCDEA) method, a goal programming-based efficiency determination method, was used for the efficiency analysis conducted for five years between the years of 2014 and 2018. As a result of the analysis, geothermal energy came into prominence as the most effective RES for all of the years included in the solution. Geothermal energy was followed by biomass energy, wind energy, hydroelectric, and solar energy, respectively.


2021 ◽  
Author(s):  
Cintia de Faria Ferreira Carraro ◽  
André Celestino Martins ◽  
Ana Carolina da Silva Faria ◽  
Carla Cristina Almeida Loures

The search for energy alternatives from renewable and clean sources has been gaining prominence at the international level, due to the increased demand for energy and the future depletion of fossil fuels, coupled with the concern with environmental issues. The generation of electricity distributed from the use of biomass can contribute to the conservation of the environment, the diversification of the energy matrix, the national economic development, the generation of jobs in the agro-industry and in the distribution of clean energy, as a sustainable alternative. This chapter aims to present information related to the use of different residual biomass as an energy alternative for Brazil, with a focus on electricity generation, based on a bibliographic survey, where it is highlighted as the best sources of biomass for electricity generation in the country, observing the profitability and viability for logistics and national economy.


In India the electricity demand is growing rapidly day by day due to various increasing residential, official and organizational buildings which requires more power. Electricity generation system is dominated by a hybrid renewable energy resources like wind and solar, approximately 35% from 2007 to till now, still power shutdown is applied compulsory by the Indian Government. In order to improve the amount of power generation to 100% with increased thermal, fossil-fueled, and bio-gas power generation is converted into complete solar, wind and thermal including peaking options. In order to fulfil the demand, the wind capacity is increased from 35% into 100% by incorporating solar and thermal. Incorporating various energy systems into stand alone power grid, the highest power demand can be fulfilled. This paper applied an application for mixing various energy resource for increasing the power generation and production.


Author(s):  
J. Santisirisomboon ◽  
B. Limmeechokchai ◽  
S. Chungpaibulpatana

2019 ◽  
Vol 116 (17) ◽  
pp. 8206-8213 ◽  
Author(s):  
Xi Lu ◽  
Liang Cao ◽  
Haikun Wang ◽  
Wei Peng ◽  
Jia Xing ◽  
...  

Realizing the goal of the Paris Agreement to limit global warming to 2 °C by the end of this century will most likely require deployment of carbon-negative technologies. It is particularly important that China, as the world’s top carbon emitter, avoids being locked into carbon-intensive, coal-fired power-generation technologies and undertakes a smooth transition from high- to negative-carbon electricity production. We focus here on deploying a combination of coal and biomass energy to produce electricity in China using an integrated gasification cycle system combined with carbon capture and storage (CBECCS). Such a system will also reduce air pollutant emissions, thus contributing to China’s near-term goal of improving air quality. We evaluate the bus-bar electricity-generation prices for CBECCS with mixing ratios of crop residues varying from 0 to 100%, as well as associated costs for carbon mitigation and cobenefits for air quality. We find that CBECCS systems employing a crop residue ratio of 35% could produce electricity with net-zero life-cycle emissions of greenhouse gases, with a levelized cost of electricity of no more than 9.2 US cents per kilowatt hour. A carbon price of approximately $52.0 per ton would make CBECCS cost-competitive with pulverized coal power plants. Therefore, our results provide critical insights for designing a CBECCS strategy in China to harness near-term air-quality cobenefits while laying the foundation for achieving negative carbon emissions in the long run.


2021 ◽  
Vol 11 (1) ◽  
pp. 109-122
Author(s):  
Eduardo Pérez-Denicia ◽  
Fabián Fernández-Luqueño ◽  
Darnes Vilariño-Ayala

Power generation through renewable sources is an effective alternative to mitigate climate change as its environmental impact is lower compared to fossil fuels. However, socio-economic problems are constant in sites where power plants are installed, especially in developing countries. In this paper, an innovative methodology was developed to assess the suitability of electricity generation through solar, wind, and biomass energy. Unlike most studies found in scientific literature, this work considers social, environmental, and economic aspects as key to determine the suitability of energy projects. First, we carried out a comprehensive analysis on social acceptance and resilience towards renewable energy and the conditions for communities to benefit from these projects; then, we analyzed the availability and capacity of renewable energy sources in Mexico, as a case study. Next,  a set of indicators related to the three pillars of sustainability was developed to assess the conditions of each place with the best renewable resources in the country. The life cycle and capacity factor of each technology were also considered. Lastly, a mathematical model was developed to determine the most suitable locations and technologies for power generation. The results show a trend towards the states of northern Mexico, especially those bordering the United States, as the most viable for electricity generation. The most appropriate technology is wind energy. Finally, Oaxaca, the state with the best wind resources and current leader in wind power generation in Mexico is, by contrast, the least viable state for wind generation, as has been later confirmed by scientific evidence, as wind facilities are associated with severe socio-cultural and economic damage in host communities in this state.


2019 ◽  
Vol 16 (2) ◽  
pp. 428-429 ◽  
Author(s):  
V. Nandagopal ◽  
V. Maheswari ◽  
J. Anbarasi

Electrical power generation by means of renewable energy resources are more common now a days. In this method we used biomass energy to generate electrical power. We used a renewable energy resource of several reasons. Some of Reasons are increasing the usage of power, available resources are not satisfying the demand, urbanization. Biomass is a greenhouse gas. It does not cause any harmfull effects to the environment. On decomposing biomass we get electricity. The method we used is pyrolysis.


Sign in / Sign up

Export Citation Format

Share Document