Encapsulation of Saccharomyces pastorianus Residual Biomass in Calcium Alginate Matrix with Insights in Ethacridine Lactate Biosorption

Pharmaceuticals are recognized as emerging water microcontaminants that have been reported in several aquatic environments worldwide; therefore, the elimination of these pollutants is a global challenge. This study aimed to develop a biosorbent based on Saccharomyces pastorianus residual biomass encapsulated in a calcium alginate matrix and to evaluate its biosorption performance to remove Ethacridine Lactate (EL) from aqueous solutions. Firstly, the synthesis and characterization of biosorbent has been carried out. Then, the impact of main parameters on biosorption process were investigated by batch experiments. Finally, the kinetics behavior and equilibrium isotherms were evaluated. The resulted beads have an irregular and elongated shape with about 1.89 mm ± 0.13 mm in size with a homogeneous structure. The best removal efficiency for EL of over 85% was obtained at acidic pH 2 and 25 °C for 50 mg/L initial concentration and 2 g/L biosorbent dose. The pseudo-second-order and intraparticle diffusion kinetics describe the biosorption process. The maximum calculated biosorption capacity was 21.39 mg/g similar to that recorded experimentally. The equilibrium biosorption data were a good fit for Freundlich and Dubinin–Radushkevich isotherms. Our findings reveal that the low cost and eco-friendly obtained biosorbent can be easily synthesized and suitable to remove Ethacridine Lactate from water matrices.

Biogas Potential Assessment of the Composite Mixture from Duckweed Biomass

The article presents the research results of anaerobic digestion processes in bioreactors of composite mixtures based on initial and residual biomass of Lemna minor duckweed and additives: inoculum (manure), food waste, and spent sorbents to determine biogas potential (biogas volume, methane content). Duckweed Lemna minor, which is widespread in freshwater reservoirs, is one of the promising aquatic vegetation species for energy use. Residual biomass is obtained by chemically extracting valuable components from the primary product. The purpose of the research was to evaluate the possibility of the energy potential of residual biomass of Lemna minor to reduce the consumption of fossil fuels and reduce greenhouse gas emissions. This is in line with the International Energy Agency (IEA) scenarios for the reduction of environmental impact. The obtained results confirm the feasibility of using this type of waste for biogas/biomethane production. The recommendations on the optimal composition of the mixture based on the residual biomass of Lemna minor, which will allow for an increase in biogas production, are given. The obtained data can be used in the design of bioreactors.

Pellet Production from Residual Biomass of Greenery Maintenance in a Small-Scale Company to Improve Sustainability

Replacing fossil energy sources with renewable energy sources is a key strategic action to limit environmental issues. To achieve this goal, substitution with biomass is beneficial due to its versatility in various fields. In terms of circular economy and sustainability, the possibility of energy exploitation of residual biomass is particularly desirable in small-medium enterprises. The use of supply chain by-products can improve sustainability and create opportunities for companies. The purpose of this study is to evaluate the suitability of residual biomass of conifers and broad-leaved trees to produce quality pellets using an agri-pellet machine activated by the power take-off of a tractor. This system can be employed at the farm level. Wood biomass of four species was tested; poplar, stone pine, black locust, and oak. Wood chips samples were analyzed to determine their qualitative characteristics following the technical standard ISO 17225-4. Based on the results, different wood blends were created to produce pellets, subsequently characterized according to ISO 17225-2. The analyses carried out on wood chips and pellets were bulk density, moisture, ash content, calorific value, elemental composition, chlorine, sulfur, and heavy metals. In addition, particles size was measured only for wood chips, while the length, diameter, mechanical durability, and ash melting behaviors were determined only for pellets. Some of the analyzed mixtures show acceptable values according to the current ISO technical standards. The values related to the apparent pellet bulk density and the durability test highlight that not all the mixtures are suitable to produce quality pellets. Results also represent a good starting point for future studies.

Organosolv Fractionation of Birch Sawdust: Establishing a Lignin-First Biorefinery

The use of residual biomass for bioconversions makes it possible to decrease the output of fossil-based chemicals and pursue a greener economy. While the use of lignocellulosic material as sustainable feedstock has been tried at pilot scale, industrial production is not yet economically feasible, requiring further technology and feedstock optimization. The aim of this study was to examine the feasibility of replacing woodchips with residual sawdust in biorefinery applications. Woodchips can be used in value-added processes such as paper pulp production, whereas sawdust is currently used mainly for combustion. The main advantages of sawdust are its large supply and a particle size sufficiently small for the pretreatment process. Whereas, the main challenge is the higher complexity of the lignocellulosic biomass, as it can contain small amounts of bark and cambium. Here, we studied the fractionation of birch sawdust by organosolv pretreatment at two different temperatures and for two different durations. We evaluated the efficiency of fractionation into the three main fractions: lignin, cellulose, and hemicellulose. The cellulose content in pretreated biomass was as high as 69.2%, which was nearly double the amount in untreated biomass. The obtained lignin was of high purity, with a maximum 4.5% of contaminating sugars. Subsequent evaluation of the susceptibility of pretreated solids to enzymatic saccharification revealed glucose yields ranging from 75% to 90% after 48 h but reaching 100.0% under the best conditions. In summary, birch sawdust can be successfully utilized as a feedstock for organosolv fractionation and replace woodchips to simplify and lower the costs of biorefinery processes.

The Use of CO2 in the Production of Bioplastics for an Even Greener Chemistry

The high life expectancy of the world population provokes increase in demand for food and energy. As a result, the intense industrialization and the application of fossil sources is responsible for high levels of CO2 emission and waste generation. To mitigate the CO2 emission a practical solution at the very short term is urgently needed. The capture of CO2 and its application in chemical processes for the valorization of residual biomass are of great importance nowadays. The application of CO2 in the selective carboxylation of furoic acid for the production of 2,5-furandicarboxylic acid (FDCA), a bio-based monomer, has been an important step towards obtaining biopolymers to replace petroleum-based plastics such as polyethylene terephthalate (PET). In this project report, we discuss on the current challenges for obtaining the 2,5-FDCA precursor from the furfural in two main routes involving oxidation and carboxylation via heterogeneous catalysis. We present the main objectives and discuss the importance of this research for the development of more sustainable processes.

Solid Biofuels Scenarios from Rural Agricultural and Forestry Residues for Mexican Industrial SMEs

In Mexico, as in the rest of the world, the industry sector is frequently highly dependent on fossil fuels; in addition, energy transformation processes are not very efficient and scarcely oriented towards climate change mitigation. Given these facts, solid biofuels (SBFs) from agricultural and forestry residues from rural areas may represent an alternative that contributes to the decarbonization of the industrial sector, especially in Small- and Medium-Sized Enterprises (SMEs). From an economic and climate change mitigation perspective, this study evaluates harnessing SBFs in SMEs related to lime, bricks, dairy products, craft beer, and artisanal mezcal (a well-known Mexican distilled alcoholic beverage), products mainly manufactured in rural areas of Mexico. For each of these SMEs, we constructed two energy consumption scenarios that span from 2018 to 2050. On the one hand, a baseline scenario (BS) that reflects the behaviour of historical energy consumption in Mexico and, on the other hand, an alternative scenario (AS) that proposes the use of SBFs with modern and efficient technologies and sustainable inputs of agricultural and forestry residues originated mainly from rural areas. According to our results, a comparison between the two scenarios reveals that two out of five SMEs industrial niches studied, appear with mitigation costs in the AS namely brick kilns, and limekilns SMEs that have mitigation costs of 9.99 and 19.74 USD/tCO2e, respectively, primarily due to the high investment cost of the new MK2 kilns and the relatively high cost of pellets, respectively. Since these niches have high mitigation potentials (7.77 MtCO2e for brick kilns and 2.83 MtCO2e for limekilns), their implementation requires adequate incentives and financing. On the contrary, the dairy, craft beer, and mezcal SMEs niches have negative mitigation costs (−14.30, −10.68, −0.98) USD/tCO2e, mainly due to the high savings in the cost of fossil fuels and their materialization, especially for the mezcal niche which has a mitigation potential of 2.97 MtCO2e, requires only an adequate regulatory and normative framework. We conclude that using commercial SBFs (pellets, briquettes, and traditional firewood) in SMEs niches contribute to generating formal markets with adequate distribution channels, both for SBFs and sustainable residual biomass inputs (residual firewood, agave bagasse, and spent barley grain). This alternative scenario also promotes the creation of green jobs in agricultural and forestry areas, adding an economic value to residual biomass inputs not previously considered and contributing to the social development of rural areas.