A Novel Voltage-Mode Configuration for First Order All-Pass Filter with One Active Element and All Grounded Passive Components

2020 ◽  
Author(s):  
Jitender Jitender ◽  
Jitendra Mohan ◽  
Bhartendu Chaturvedi
Keyword(s):  
Active Element ◽  
Passive Components ◽  
Pass Filter ◽  
First Order ◽  
Voltage Mode ◽  
Mode Configuration

scholarly journals Voltage-Mode All-Pass Filters Including Minimum Component Count Circuits

2007 ◽  
Vol 2007 ◽  
pp. 1-5 ◽  
Author(s):  
Sudhanshu Maheshwari
Keyword(s):  
Active Element ◽  
Passive Component ◽  
Output Impedance ◽  
Passive Components ◽  
First Order ◽  
Voltage Mode ◽  
Pspice Simulation ◽  
Simulation Results ◽  
A Current

This paper presents two new first-order voltage-mode all-pass filters using a single-current differencing buffered amplifier and four passive components. Each circuit is compatible to a current-controlled current differencing buffered amplifier with only two passive elements, thus resulting in two more circuits, which employ a capacitor, a resistor, and an active element, thus using a minimum of active and passive component counts. The proposed circuits possess low output impedance, and hence can be easily cascaded for voltage-mode systems. PSPICE simulation results are given to confirm the theory.

scholarly journals Design of Voltage Mode Electronically Tunable First Order All Pass Filter in ±0.7 V 16 nm CNFET Technology

Electronics ◽  
2019 ◽  
Vol 8 (1) ◽  
pp. 95 ◽  
Author(s):  
Muhammad Masud ◽  
Abu A’ain ◽  
Iqbal Khan ◽  
Nasir Husin
Keyword(s):  
Low Voltage ◽  
Wide Frequency Range ◽  
Passive Components ◽  
Pass Filter ◽  
First Order ◽  
Voltage Mode ◽  
Tunable Range ◽  
Low Voltage Operation ◽  
Unity Gain ◽  
Electronically Tunable

A novel voltage mode first order active only tuneable all pass filter (AOTAPF) circuit configuration is presented. The AOTAPF has been designed using ±0.7 V, 16 nm carbon nanotube field effect transistor (CNFET) Technology. The circuit uses CNFET based varactor and unity gain inverting amplifier (UGIA). The presented AOTAPF is realized with three N-type CNFETs and without any external passive components. It is to be noted that the realized circuit uses only two CNFETs between its supply-rails and thus, suitable for low-voltage operation. The electronic tunability is achieved by varying the voltage controlled capacitance of the employed CNFET varactor. By altering the varactor tuning voltage, a wide tunable range of pole frequency between 34.2 GHz to 56.9 GHz is achieved. The proposed circuit does not need any matching constraint and is suitable for multi-GHz frequency applications. The presented AOTAPF performance is substantiated with HSPICE simulation program for 16 nm technology-node, using the well-known Stanford CNFET model. AOTAPF simulation results verify the theory for a wide frequency-range.

scholarly journals Tunable First-Order Resistorless All-Pass Filter with Low Output Impedance

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Parveen Beg
Keyword(s):  
Building Block ◽  
Active Element ◽  
Higher Order ◽  
Current Conveyor ◽  
Passive Component ◽  
Output Impedance ◽  
Pass Filter ◽  
Mos Transistor ◽  
First Order ◽  
Voltage Mode

This paper presents a voltage mode cascadable single active element tunable first-order all-pass filter with a single passive component. The active element used to realise the filter is a new building block termed as differential difference dual-X current conveyor with a buffered output (DD-DXCCII). The filter is thus realized with the help of a DD-DXCCII, a capacitor, and a MOS transistor. By exploiting the low output impedance, a higher order filter is also realized. Nonideal and parasitic study is also carried out on the realised filters. The proposed DD-DXCCII filters are simulated using TSMC the 0.25 µm technology.

Some Analog Filters of Reduced Complexity with Shelving and Multifunctional Characteristics

2018 ◽  
Vol 27 (10) ◽  
pp. 1850150 ◽  
Author(s):  
Sudhanshu Maheshwari
Keyword(s):  
Power Supply ◽  
Active Element ◽  
Current Conveyor ◽  
Analog Filters ◽  
First Order ◽  
Voltage Mode ◽  
Experimental Support ◽  
Reduced Complexity ◽  
Simulation Results ◽  
The One

This paper presents first-order voltage-mode filters using a single current conveyor with an additional X-stage, and passive elements. The new circuits have multifunction capability, and also realize low-shelf, high-shelf and band-shelf functions. The study is carried out on the effects of non-idealities, parasitic elements, and loading on the performance of proposed circuits. Active and passive sensitivities are also analyzed. The active element, extra-X current conveyor used for designing new circuits is simpler than most of the one active element and two passive elements’ based circuits. Detailed comparisons are carried out with relevant available works, and the new circuits are found to be more compact and exhibit higher frequency performances. The simulation results using 0.25[Formula: see text][Formula: see text]m CMOS parameters with [Formula: see text]1.25[Formula: see text]V power-supply are shown to verify the proposed circuits. The proposed circuits are also verified through simulations. Experimental support is given using AD-844 ICs to strengthen the validity of the proposed circuits.

NOVEL VOLTAGE-MODE CASCADABLE ALL-PASS SECTIONS EMPLOYING GROUNDED PASSIVE COMPONENTS

2013 ◽  
Vol 22 (01) ◽  
pp. 1250065 ◽  
Author(s):  
SUDHANSHU MAHESHWARI ◽  
JITENDRA MOHAN ◽  
DURG SINGH CHAUHAN
Keyword(s):  
Current Conveyors ◽  
Output Impedance ◽  
High Input ◽  
Passive Components ◽  
Quadrature Oscillator ◽  
Pspice Simulations ◽  
First Order ◽  
Voltage Mode ◽  
Differential Voltage ◽  
Parasitic Effects

This paper presents two new first-order voltage-mode (VM) cascadable all-pass (AP) sections, employing two differential voltage current conveyors (DVCCs) and three grounded passive components. Both circuits possess high input and low output impedance, which makes them easily cascadable. Non-ideality aspects and parasitic effects are also studied. As an application, a quadrature oscillator is designed using the proposed circuit. The proposed circuits are verified through PSPICE simulations using 0.5 μm CMOS parameters.

Sign in / Sign up

Export Citation Format

Share Document