scholarly journals Tunable First-Order Resistorless All-Pass Filter with Low Output Impedance

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Parveen Beg
Keyword(s):  
Building Block ◽  
Active Element ◽  
Higher Order ◽  
Current Conveyor ◽  
Passive Component ◽  
Output Impedance ◽  
Pass Filter ◽  
Mos Transistor ◽  
First Order ◽  
Voltage Mode

This paper presents a voltage mode cascadable single active element tunable first-order all-pass filter with a single passive component. The active element used to realise the filter is a new building block termed as differential difference dual-X current conveyor with a buffered output (DD-DXCCII). The filter is thus realized with the help of a DD-DXCCII, a capacitor, and a MOS transistor. By exploiting the low output impedance, a higher order filter is also realized. Nonideal and parasitic study is also carried out on the realised filters. The proposed DD-DXCCII filters are simulated using TSMC the 0.25 µm technology.

scholarly journals Voltage-Mode All-Pass Filters Including Minimum Component Count Circuits

2007 ◽  
Vol 2007 ◽  
pp. 1-5 ◽  
Author(s):  
Sudhanshu Maheshwari
Keyword(s):  
Active Element ◽  
Passive Component ◽  
Output Impedance ◽  
Passive Components ◽  
First Order ◽  
Voltage Mode ◽  
Pspice Simulation ◽  
Simulation Results ◽  
A Current

This paper presents two new first-order voltage-mode all-pass filters using a single-current differencing buffered amplifier and four passive components. Each circuit is compatible to a current-controlled current differencing buffered amplifier with only two passive elements, thus resulting in two more circuits, which employ a capacitor, a resistor, and an active element, thus using a minimum of active and passive component counts. The proposed circuits possess low output impedance, and hence can be easily cascaded for voltage-mode systems. PSPICE simulation results are given to confirm the theory.

High Performance Voltage-Mode Tunable All-Pass Section

2015 ◽  
Vol 24 (06) ◽  
pp. 1550080 ◽  
Author(s):  
S. Maheshwari ◽  
D. Agrawal
Keyword(s):  
Process Parameters ◽  
High Performance ◽  
Current Conveyor ◽  
Passive Component ◽  
Output Impedance ◽  
High Input ◽  
Pass Filter ◽  
Voltage Mode ◽  
Pspice Simulation ◽  
Trade Offs

This paper presents a voltage-mode (VM) tunable all-pass section, employing a grounded capacitor and a newly introduced current conveyor with an extra X stage. The proposed all-pass filter uses grounded capacitor as the only passive component and benefits from high input and low output impedance. The proposed circuit exhibits eight performance features without trade-offs, as compared to carefully chosen 25 published works. The functionality of the proposed element is verified through PSPICE simulation using 0.25-μm process parameters. An application of second order is also incorporated.

scholarly journals CMOS Realizable and Highly Cascadable Structures of First-Order All-Pass Filters

2021 ◽  
Vol 18 (14) ◽  
Author(s):  
Jitender Jitender ◽  
Jitendra MOHAN ◽  
Bhartendu CHATURVEDI
Keyword(s):  
Second Generation ◽  
Cmos Technology ◽  
Current Conveyor ◽  
Passive Component ◽  
Pass Filter ◽  
Quadrature Oscillator ◽  
First Order ◽  
Voltage Mode ◽  
Fully Differential ◽  
Low Sensitivity

Two novel resistorless structures of a first-order voltage-mode all-pass filter are presented in the paper. Both the structures employ a fully differential second-generation current conveyor (FDCCII) as the primary active element, in addition to an active resistor. A grounded capacitor is the only passive component used in both the structures. In both the structures, CMOS realization of FDCCII is utilized; hence, these structures are CMOS compatible. Some of the other highly demanded features possessed by the presented all-pass structures are: a simple circuit topology, electronic tunability, high input impedance, constraint-free operation in terms of passive component matching, and low sensitivity figures. The theoretical performances under ideal and non-ideal scenarios are presented in detail. Furthermore, the proposed idea is extended to an Nth-order voltage-mode all-pass filter and a quadrature oscillator to explore some of the possible applications. PSPICE simulation results verify the theoretical claims of the presented all-pass filters. HIGHLIGHTS Two novel resistorless structures of first-order all-pass filters based on fully differential second-generation current conveyor are presented Performance of the proposed structures are thoroughly described in ideal and non-ideal scenarios Theoretically described details of the proposed structures are verified by carrying simulations on PSPICE using 180 nm CMOS technology An Nth-order all-pass filter and a quadrature oscillator are also presented as applications GRAPHICAL ABSTRACT

Some Analog Filters of Reduced Complexity with Shelving and Multifunctional Characteristics

2018 ◽  
Vol 27 (10) ◽  
pp. 1850150 ◽  
Author(s):  
Sudhanshu Maheshwari
Keyword(s):  
Power Supply ◽  
Active Element ◽  
Current Conveyor ◽  
Analog Filters ◽  
First Order ◽  
Voltage Mode ◽  
Experimental Support ◽  
Reduced Complexity ◽  
Simulation Results ◽  
The One

This paper presents first-order voltage-mode filters using a single current conveyor with an additional X-stage, and passive elements. The new circuits have multifunction capability, and also realize low-shelf, high-shelf and band-shelf functions. The study is carried out on the effects of non-idealities, parasitic elements, and loading on the performance of proposed circuits. Active and passive sensitivities are also analyzed. The active element, extra-X current conveyor used for designing new circuits is simpler than most of the one active element and two passive elements’ based circuits. Detailed comparisons are carried out with relevant available works, and the new circuits are found to be more compact and exhibit higher frequency performances. The simulation results using 0.25[Formula: see text][Formula: see text]m CMOS parameters with [Formula: see text]1.25[Formula: see text]V power-supply are shown to verify the proposed circuits. The proposed circuits are also verified through simulations. Experimental support is given using AD-844 ICs to strengthen the validity of the proposed circuits.

ADDITIONAL HIGH-INPUT LOW-OUTPUT IMPEDANCE VOLTAGE-MODE ALL-PASS SECTIONS

2014 ◽  
Vol 23 (06) ◽  
pp. 1450077 ◽  
Author(s):  
JITENDRA MOHAN ◽  
SUDHANSHU MAHESHWARI
Keyword(s):  
Second Generation ◽  
Current Conveyor ◽  
Output Impedance ◽  
High Input ◽  
First Order ◽  
Voltage Mode ◽  
Fully Differential ◽  
Differential Voltage ◽  
Ideal Study ◽  
Simulation Results

To extend the existing knowledge on first-order voltage-mode all-pass filters, this paper presents two novel first-order voltage-mode all-pass sections, each employing single fully differential second-generation current conveyor (FDCCII) being used as the newly obtained fully differential voltage conveyor (FDVC), a resistor and a grounded capacitor. Both the proposed circuits possess high-input and low-output impedance feature, which makes the proposed circuits ideal for voltage-mode systems. Non-ideal study along with simulation results is given for validation.

scholarly journals Cascadable Current-Mode First-Order All-Pass Filter Based on Minimal Components

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Jitendra Mohan ◽  
Sudhanshu Maheshwari
Keyword(s):  
Current Mode ◽  
Current Conveyor ◽  
Cmos Process ◽  
Output Impedance ◽  
Circuit Realization ◽  
Pass Filter ◽  
First Order ◽  
High Output Impedance ◽  
Theoretical Results ◽  
High Output

A novel current-mode first-order all-pass filter with low input and high output impedance feature is presented. The circuit realization employs a single dual-X-second-generation current conveyor, one grounded capacitor, and one grounded resistor, which is a minimum component realization. The theoretical results are verified using PSPICE simulation program with TSMC 0.35 μm CMOS process parameters.

scholarly journals Additional High Input Low Output Impedance Analog Networks

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Sudhanshu Maheshwari ◽  
Bhartendu Chaturvedi
Keyword(s):  
Sensitivity Analysis ◽  
Input Impedance ◽  
Second Order ◽  
Current Conveyor ◽  
Output Impedance ◽  
High Input ◽  
High Input Impedance ◽  
Pspice Simulations ◽  
Voltage Mode ◽  
Good Agreement

This paper presents some additional high input low output impedance analog networks realized using a recently introduced single Dual-X Current Conveyor with buffered output. The new circuits encompass several all-pass sections of first- and second-order. The voltage-mode proposals benefit from high input impedance and low output impedance. Nonideality and sensitivity analysis is also performed. The circuit performances are depicted through PSPICE simulations, which show good agreement with theory.

Sign in / Sign up

Export Citation Format

Share Document