A dynamic neural network for adaptive optimal learning of robot motion with guaranteed convergence rate

Author(s):  
Chae-Wook Chung ◽  
Hyun-Bae Lee ◽  
Tae-Yong Kuc ◽  
Taek-Chong Yi
Author(s):  
Alexander Driyarkoro ◽  
Nurain Silalahi ◽  
Joko Haryatno

Prediksi lokasi user pada mobile network merupakan hal sangat penting, karena routing panggilan pada mobile station (MS) bergantung pada posisi MS saat itu. Mobilitas MS yang cukup tinggi, terutama di daerah perkotaan, menyebabkan pencarian (tracking) MS akan berpengaruh pada kinerja sistem mobile network, khususnya dalam hal efisiensi kanal kontrol pada air interface. Salah satu bentuk pencarian adalah dengan mengetahui perilaku gerakan yang menentukan posisi MS. Dari MSC/VLR dapat diketahui posisi MS pada waktu tertentu. Karena location area suatu MS selalu unik dari waktu ke waktu, dan hal itu merupakan perilaku (behaviour) MS, maka dapat dibuat profil pergerakannya. Dengan menggunakan Neural Network (NN) akan diperoleh location area MS pada masa yang akan datang. Model NN yang digunakan pada penelitian ini adalah Propagasi Balik. Beberapa parameter NN yang diteliti dalam mempengaruhi kinerja prediksi lokasi user meliputi noise factor, momentum dan learning rate. Pada penelitian ini diperoleh nilai optimal learning rate = 0,5 dan noise factor = 1.


Author(s):  
Meng Wei ◽  
Min Ye ◽  
Jia Bo Li ◽  
Qiao Wang ◽  
Xin Xin Xu

State of charge (SOC) of the lithium-ion batteries is one of the key parameters of the battery management system, which the performance of SOC estimation guarantees energy management efficiency and endurance mileage of electric vehicles. However, accurate SOC estimation is a difficult problem owing to complex chemical reactions and nonlinear battery characteristics. In this paper, the method of the dynamic neural network is used to estimate the SOC of the lithium-ion batteries, which is improved based on the classic close-loop nonlinear auto-regressive models with exogenous input neural network (NARXNN) model, and the open-loop NARXNN model considering expected output is proposed. Since the input delay, feedback delay, and hidden layer of the dynamic neural network are usually selected by empirically, which affects the estimation performance of the dynamic neural network. To cover this weakness, sine cosine algorithm (SCA) is used for global optimal dynamic neural network parameters. Then, the experimental results are verified to obtain the effectiveness and robustness of the proposed method under different conditions. Finally, the dynamic neural network based on SCA is compared with unscented Kalman filter (UKF), back propagation neural network based on particle swarm optimization (BPNN-PSO), least-squares support vector machine (LS-SVM), and Gaussian process regression (GPR), the results show that the proposed dynamic neural network based on SCA is superior to other methods.


2016 ◽  
Vol 186 ◽  
pp. 207-217 ◽  
Author(s):  
Xin Deng ◽  
Jian-Xin Xu ◽  
Jin Wang ◽  
Guo-yin Wang ◽  
Qiao-song Chen

2021 ◽  
Author(s):  
Daiki Kato ◽  
Kenya Yoshitugu ◽  
Naoki Maeda ◽  
Toshiki Hirogaki ◽  
Eiichi Aoyama ◽  
...  

Abstract Most industrial robots are taught using the teaching playback method; therefore, they are unsuitable for use in variable production systems. Although offline teaching methods have been developed, they have not been practiced because of the low accuracy of the position and posture of the end-effector. Therefore, many studies have attempted to calibrate the position and posture but have not reached a practical level, as such methods consider the joint angle when the robot is stationary rather than the features during robot motion. Currently, it is easy to obtain servo information under numerical control operations owing to the Internet of Things technologies. In this study, we propose a method for obtaining servo information during robot motion and converting it into images to find features using a convolutional neural network (CNN). Herein, a large industrial robot was used. The three-dimensional coordinates of the end-effector were obtained using a laser tracker. The positioning error of the robot was accurately learned by the CNN. We extracted the features of the points where the positioning error was extremely large. By extracting the features of the X-axis positioning error using the CNN, the joint 1 current is a feature. This indicates that the vibration current in joint 1 is a factor in the X-axis positioning error.


Sign in / Sign up

Export Citation Format

Share Document