Comparison of HDL coder and system generator tools in terms of QPSK analysis

Author(s):  
Ibrahim Isik ◽  
Mehmet Emin Tagluk
Keyword(s):  
2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Alberto Noto ◽  
Claudia Crimi ◽  
Andrea Cortegiani ◽  
Massimiliano Giardina ◽  
Filippo Benedetto ◽  
...  

AbstractDuring the COVID-19 pandemic, the need for noninvasive respiratory support devices has dramatically increased, sometimes exceeding hospital capacity. The full-face Decathlon snorkeling mask, EasyBreath (EB mask), has been adapted to deliver continuous positive airway pressure (CPAP) as an emergency respiratory interface. We aimed to assess the performance of this modified EB mask and to test its use during different gas mixture supplies. CPAP set at 5, 10, and 15 cmH2O was delivered to 10 healthy volunteers with a high-flow system generator set at 40, 80, and 120 L min−1 and with a turbine-driven ventilator during both spontaneous and loaded (resistor) breathing. Inspiratory CO2 partial pressure (PiCO2), pressure inside the mask, breathing pattern and electrical activity of the diaphragm (EAdi) were measured at all combinations of CPAP/flows delivered, with and without the resistor. Using the high-flow generator set at 40 L min−1, the PiCO2 significantly increased and the system was unable to maintain the target CPAP of 10 and 15 cmH2O and a stable pressure within the respiratory cycle; conversely, the turbine-driven ventilator did. EAdi significantly increased with flow rates of 40 and 80 L min−1 but not at 120 L min−1 and with the turbine-driven ventilator. EB mask can be safely used to deliver CPAP only under strict constraints, using either a high-flow generator at a flow rate greater than 80 L min−1, or a high-performance turbine-driven ventilator.


1986 ◽  
Vol 16 (4) ◽  
pp. 148-157
Author(s):  
Richard W. Butterworth ◽  
Robert A. Stephan

1983 ◽  
Vol 18 (6) ◽  
pp. 28-33 ◽  
Author(s):  
Rolf Bahlke ◽  
Gregor Snelting

Author(s):  
L. Merah ◽  
◽  
P. Lorenz ◽  
A. Ali-Pacha ◽  
N. Hadj-Said ◽  
...  

The enormous progress in communication technology has led to a tremendous need to provide an ideal environment for the transmission, storing, and processing of digital multimedia content, where the audio signal takes the lion's share of it. Audio processing covers many diverse fields, its main aim is presenting sound to human listeners. Recently, digital audio processing became an active research area, it covers everything from theory to practice in relation to transmission, compression, filtering, and adding special effects to an audio signal. The aim of this work is to present the real-time implementation steps of some audio effects namely, the echo and Flanger effects on Field Programmable Gate Array (FPGA). Today, FPGAs are the best choice in data processing because they provide more flexibility, performance, and huge processing capabilities with great power efficiency. Designs are achieved using the XSG tool (Xilinx System Generator), which makes complex designs easier without prior knowledge of hardware description languages. The paper is presented as a guide with deep technical details about designing and real-time implementation steps. We decided to transfer some experience to designers who want to rapidly prototype their ideas using tools such as XSG. All the designs have been simulated and verified under Simulink/Matlab environment, then exported to Xilinx ISE (Integrated Synthesis Environment) tool for the rest of the implementation steps. The paper also gives an idea of interfacing the FPGA with the LM4550 AC’97 codec using VHDL coding. The ATLYS development board based on Xilinx Spartan-6 LX45 FPGA is used for the real-time implementation.


Sign in / Sign up

Export Citation Format

Share Document