Improving Tip Position Estimation Accuracy of Gastric Tube by Compensating Geomagnetic Field with Offset Coils.

Author(s):  
T. Sasayama ◽  
Y. Gotoh ◽  
K. Enpuku
2020 ◽  
Vol 49 (5) ◽  
pp. 49-57
Author(s):  
A. V. Ksendzuk ◽  
E. A. Surmin ◽  
V. V. Kachesov ◽  
S. O. Zhdanov ◽  
K. S. Shakhalov

Results of an experimental study of a local navigation system based on the processing signals from broadcast sources presented. The results of the development of processing algorithms for point-to-point coordinates estimation of the object are presented. The results of the development of algorithms for trajectories estimation are presented. In performed simulation the possibility of obtaining submeter position estimation accuracy in the proposed system is shown. Development results of the navigation module demonstrator are presented. The results of experimental work in difficult navigation conditions, in the presence of shading, reflections and other factors, are presented. It is shown that the developed navigation module allows in the open space near buildings which partially obscuring the satellite systems signals to obtain accuracy higher than the GNSS navigation equipment. In indoor environment in the absence of satellite navigation signals, the developed module shows positioning accuracy not worse than 1.5 meters and provides a measurement rate 1 Hz and better.


Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1137
Author(s):  
Ondřej Holešovský ◽  
Radoslav Škoviera ◽  
Václav Hlaváč ◽  
Roman Vítek

We compare event-cameras with fast (global shutter) frame-cameras experimentally, asking: “What is the application domain, in which an event-camera surpasses a fast frame-camera?” Surprisingly, finding the answer has been difficult. Our methodology was to test event- and frame-cameras on generic computer vision tasks where event-camera advantages should manifest. We used two methods: (1) a controlled, cheap, and easily reproducible experiment (observing a marker on a rotating disk at varying speeds); (2) selecting one challenging practical ballistic experiment (observing a flying bullet having a ground truth provided by an ultra-high-speed expensive frame-camera). The experimental results include sampling/detection rates and position estimation errors as functions of illuminance and motion speed; and the minimum pixel latency of two commercial state-of-the-art event-cameras (ATIS, DVS240). Event-cameras respond more slowly to positive than to negative large and sudden contrast changes. They outperformed a frame-camera in bandwidth efficiency in all our experiments. Both camera types provide comparable position estimation accuracy. The better event-camera was limited by pixel latency when tracking small objects, resulting in motion blur effects. Sensor bandwidth limited the event-camera in object recognition. However, future generations of event-cameras might alleviate bandwidth limitations.


Measurement ◽  
2021 ◽  
Vol 169 ◽  
pp. 108630
Author(s):  
Krzysztof Naus ◽  
Mariusz Wąż ◽  
Piotr Szymak ◽  
Lucjan Gucma ◽  
Maciej Gucma

2016 ◽  
Vol 33 (6) ◽  
pp. 1784-1799 ◽  
Author(s):  
Chien-Hsing Chen ◽  
Ming-Chih Chen

Purpose – The purpose of this paper is to present a novel position estimation method to accurately locate an object. An accelerometer-based error correction method is also developed to correct the positioning error caused by signal drift of a wireless network. Finally, the method is also utilized to locate cows in a farm for monitoring the action of standing heat. Design/methodology/approach – The proposed method adopts the received signal strength indicator (RSSI) of a wireless sensor network (WSN) to compute the position of an object. The RSSI signal can be submitted from an endpoint device. A complex environment destabilizes the RSSI value, making the position estimation inaccurate. Therefore, a three-axial accelerometer is adopted to correct the position estimation accuracy. Timer and acceleration are two major factors in computing the error correction value to adjust the position estimate. Findings – The proposed method is tested on a farm management system for positioning dairy cows accurately. Devices with WSN module and three-axial accelerometer are mounted on the cows to monitor their positions and actions. Research limitations/implications – If cows in a crowded farm are close to each other, then the position estimation method is unable to position each cow correctly because too many close objects cause interference in the wireless network. Practical implications – Experimental results demonstrate that the proposed method improves the position accuracy, and monitor the heat action of the cows effectively. Originality/value – No position estimation method has been utilized to locate cows in a farm, especially for monitoring their actions via WSN and accelerometer. The proposed method adopts an accelerometer to efficiently improve the position error caused from the signal drift of WSN.


Sign in / Sign up

Export Citation Format

Share Document