Microstrip antenna miniaturization using metamaterial structures

Author(s):  
Mandana Mehrparvar ◽  
Farrokh Hodjat Kashani
Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3897
Author(s):  
Supakit Kawdungta ◽  
Akkarat Boonpoonga ◽  
Chuwong Phongcharoenpanich

In light of the growth in demand for multiband antennas for medical applications, this research proposes a MICS/ISM meander-line microstrip antenna encapsulated in an oblong-shaped pod for use in diagnoses of the gastrointestinal tract. The proposed antenna is operable in the Medical Implant Communication System (MICS) and the Industrial, Scientific and Medical (ISM) bands. The antenna structure consists of a meander-line radiating patch, a flipped-L defected ground plane, and a loading resistor for antenna miniaturization. The MICS/ISM microstrip antenna encapsulated in an oblong-shaped pod was simulated in various lossy-material environments. In addition, the specific absorption rate (SAR) was calculated and compared against the IEEE C95.1 standard. For verification, an antenna prototype was fabricated and experiments carried out in equivalent liquid mixtures, the dielectric constants of which resembled human tissue. The measured impedance bandwidths (|S11| ≤ −10 dB) for the MICS and ISM bands were 398–407 MHz and 2.41–2.48 GHz. The measured antenna gains were −38 dBi and −13 dBi, with a quasi-omnidirectional radiation pattern. The measured SAR was substantially below the maximum safety limits. As a result, the described MICS/ISM microstrip antenna encapsulated in an oblong-shaped pod can be used for real-time gastrointestinal tract diagnosis. The novelty of this work lies in the use of a meander-line microstrip, flipped-L defected ground plane, and loading resistor to miniaturize the antenna and realize the MICS and ISM bands.


Author(s):  
Vista Agus Sria Warman ◽  
Radial Anwar ◽  
Yuyu Wahyu

Antenna miniaturization has become one important research, especially in mobile communication technology development. This paper presents the development of a miniaturized antenna for RFID application (924 MHz). Meandering technique has been adopted to create a geometrically small antenna relative to its operating frequency. Measurement result shows that the fabricated antenna inherits low return loss, down to -25.915 dB. The geometry of the antenna is 25.54 mm x 16 mm, which is much smaller than its resonance wavelength (0.079? x 0.049?). The measured gain is relatively small, of about -12 dBi. Nevertheless, the obtained parameters are acceptable since the antenna is meant for near field communication application.


2014 ◽  
Vol 989-994 ◽  
pp. 3497-3500
Author(s):  
Luo Ren ◽  
Yong Zhong Zhu ◽  
Dan Su ◽  
Xin Deng

The airborne omni-directional antenna must not only satisfy the indicators of omni-directional horizontal requirements, but also have conformal shape with the surface of airplane. The common monopole antenna and microstrip antenna can not meet the above requirements. Under the background of the airborne antenna miniaturization and conformal demand, this article designs a kind of airborne circular slot antenna. The structure of the antenna is simple, which meets pattern VSWR < 1.4 bandwidth of 350 MHz to 376 MHz and meets pattern VSWR < 2 bandwidth of 338 MHz to 438 MHz .Its maximum gain within the operating frequency range can be 4.205 dB .


2006 ◽  
Vol 49 (1) ◽  
pp. 155-159 ◽  
Author(s):  
Olli Luukkonen ◽  
Pekka Ikonen ◽  
Sergei Tretyakov

Sign in / Sign up

Export Citation Format

Share Document