An Energy Efficient System for Touch Modality Classification in Electronic Skin Applications

Author(s):  
M. Osta ◽  
A. Ibrahim ◽  
M. Magno ◽  
M. Eggimann ◽  
A. Pullini ◽  
...  
2013 ◽  
Vol 769 ◽  
pp. 319-326 ◽  
Author(s):  
Martin Beck ◽  
Tilo Sielaff

Industrial enterprises are increasingly driven to tap the potentials of energy efficiency in existing and future production sites. The challenge is to identify cost-efficient levers for a low energy demand in the linked energy system of production machines and peripheral devices. Considering enabling technologies for energy efficiency and energy recovery in a cascaded energy network with energy storages this paper presents an approach towards energy and cost-efficient system configurations for production sites. An outlook will be given on the research center eta-factory for energy efficient factories at the PTW, TU Darmstadt.


Author(s):  
Aisha Ajeerah Azahar ◽  
◽  
Nor Akmal Mohd Jamail ◽  
Amal Hayati Mat Isa ◽  
Fatin Nazirah Md Sani ◽  
...  

Economical home system can be defined as one realization of home that have a cost-effective ideal by using specific set of technologies combined with the renewable energy as a power supply. This system has a highly advance for lighting, temperature control, socket and own power supply by using solar panel. This system is developed in this project and focused on B40 community that represents the bottom 40% of income earners and also this project becomes suitable for this community for getting an energy efficiency system. Due to the COVID-19, B40 households were reported to have lost their jobs causing financial hardship and had to face the issue of high electricity bills which are very burdensome for them at all in order to pay the cost electricity for monthly. The aim of the article is to design and simulate the solar power system including battery storage in suitable software for a residential house especially in B40 community home and also to analyze the potential of battery storage in order to store the energy from solar panel. Therefore, the economical electricity home system using solar energy for B40 community is proposed in this project for producing an energy efficient system at home. In addition, an electrical floor plan and floor plan of B40 community home is designed in the SketchUp software that using basic electrical equipment such as lighting, ceiling fan and socket. The system is developed by using the MATLAB software in order to produce the result of energy efficiency by using the renewable energy which is solar system and also battery storage. According to the data produced from the calculation of old bills and new bills, the energy consumptions are calculated and also be compared before and after using the renewable energy which is using solar system. The data obtained through calculation of maximum demand in new bill is used in the simulation of solar system in MATLAB software. The results obtained show that after using an energy-efficient load, the monthly new bill is around RM 27.79 which is around RM 10.75 less than the monthly old bill before using an energy-efficient load. It can be concluded that the use of renewable energy in B40 community home can save the energy and also money.


Author(s):  
Pooja Kharde

The paper on ‘Automation in street light’ broadly aims to develop an energy efficient system by using automation in street lights which is controlled by an Arduino UNO. The street system widely present consumes more power and requires huge energy supply. To overcome this problem, there is need to create a system which will save energy ,power and also take into consideration safety measures of local ones . No pedestrians or vehicle will face any problem as smart lights will automatic glow before they arrive and will get dim as soon as vehicles leave the place . The moments of light is controlled by sensors, these sensors will execute task by detecting presence of objects as obstacles . Prototype consist of Arduino UNO R3, LEDS, IR sensors, batteries etc. Arduino UNO is an important part of model to code the circuit and to conquer desired outcome.


2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Parvin Kumar ◽  
Sanjay Kumar Sharma ◽  
Shelly Singla ◽  
Varun Gupta ◽  
Abhishek Sharma

Abstract In today’s scenario, wireless communication is turning into a decisive and leading backbone to access the worldwide network. Therefore, the usage of mobile phones and broadband is rising staggeringly. To satisfy their expulsive needs, it demands increment in data rates while providing higher bandwidth and utilizing optical fiber in wireless communication, and this becomes a worldwide analysis area. Radio over fiber (RoF) system is taken into account as best solution to fulfill these needs. In RoF system, the radio frequency signal operated at millimeter wave (30–300 GHz) is centralized and processed at control station (CS) and also, the CS upconverts this electrical signal to optical domain. By employing optical fiber link, this signal reaches to base station (BS). Then, the received optical signal converts back to electrical domain at the respective BS. Now BS radiates the electrical signal to corresponding mobile station (MS) in commission with the millimeter wave frequency bands. This RoF system is providing massive bandwidth, facilitating large mobility for RF frequency signals, small loss, fast and cost effective setup, wonderful security, and unlicensed spectrum etc. The RoF system introduces microcells structure for BS cells to boost the frequency reuse and needed capacity. It has benefits in terms of ability to fulfill increasing bandwidth demands to cut back the power consumption and the dimensions of the handset devices. This paper firstly explains the overview of existing wireless mobile communication and broadband systems and then, targets the review of RoF system which will become energy efficient system for next generation mobile communication and future broadband systems. This paper also includes the performance degradation and evaluation parameters. Finally, this paper presents the various research opportunities for its implementation zone.


Author(s):  
Arvind Dagur ◽  
Mishra Adityakumar Virendra ◽  
Mayank Pratap Singh ◽  
Deepak Gupta ◽  
Chetanya Sharma ◽  
...  

2020 ◽  
Vol 29 (14) ◽  
pp. 2050235
Author(s):  
Sadulla Shaik

This paper explores the design and analysis of 20[Formula: see text]nm tunnel transistor-based Exclusive-OR (Ex-OR) gates and half-adder cells with circuit interaction (co-design) approach for energy efficient and reliable computing architectures at scaled supply voltages (50–300[Formula: see text]mV). TFETs have attracted much attention recently for energy efficient system designs. The circuit interaction is made possible for designing more consistent functional architectures at the minimum power supply of 50–300[Formula: see text]mV. Using this technique, the core computational blocks of basic adder blocks and Ex-OR gates are designed with TFET as a fundamental device and the whole design procedure is elaborated in this paper. The primary classifications of Tunnel FETs, viz. Homo-junction TFET (HoJn TFET) and Hetero-junction TFETs (HeJn TFET) are investigated thoroughly under different constraints specifically at the device configurations. By considering the above-mentioned subtypes of TFETs, three variants of Ex-OR primitive gates are modeled and are named with respect to the use of transistors as static complementary TFET-12T (SC12T), Transmission Gate logic-8T (TG8T) and Improved Transmission Gate logic-6T (ITG6T) Ex-OR gate designs. The benchmarking of the proposed gates is done using double-gate Si FinFET at 20[Formula: see text]nm technology. Amongst all the three proposed Ex-OR designs of SC12T, TG8T and ITG6T in addition to that of LVT and HVT FinFET/CMOS, only ITG6T is the designer’s choice by offering the minimum power consumption as well as high energy, improved choice compared to the other two styles of designs and also when robustness and reliability are taken into account, SC12T and TG8T designs are not providing the full swing of outputs. The minute glitch with that of ITG6T designs is a lesser reliability feature and for this the best alternative is TFET TG8T by providing suppressed over shoots and enhanced transition speed. From the performed multi simulations under different critical conditions and at supply voltage of 100[Formula: see text]mV, it is being demonstrated that the energy efficient circuit option is the SC12T and ITG6T Ex-OR designs which are validated with the steep slope characteristics of TFET’s and also these two designs offer reliability advantage. The major restrictions from the energy efficiency issues are eliminated and disclosed in the HoJn TFETs and HeJn TFET by using circuit co-design methodology and TFETs steep slope characteristics.


2019 ◽  
Vol 11 (6) ◽  
pp. 2337-2348 ◽  
Author(s):  
Himanshu Agrawal ◽  
Ruchi Dhall ◽  
K. S. S. Iyer ◽  
Vijayalakshmi Chetlapalli

Sign in / Sign up

Export Citation Format

Share Document