LED array unit with silicon microreflector

Author(s):  
K. Takahashi ◽  
N. Tadokoro ◽  
S. Takeuti
Keyword(s):  
2008 ◽  
Author(s):  
John L. Bradshaw ◽  
John D. Bruno ◽  
Frederick J. Towner ◽  
Christi A. Shiner ◽  
John T. Pham ◽  
...  
Keyword(s):  

Author(s):  
Kwang-Seong Choi ◽  
Wagno Alves Braganca Junior ◽  
leeseul Jeong ◽  
Keon-Soo Jang ◽  
Seok Hwan Moon ◽  
...  
Keyword(s):  

2020 ◽  
Vol 53 (2) ◽  
pp. 16031-16036
Author(s):  
Jake D. Campbell ◽  
Lui Holder-Pearson ◽  
Christopher G. Pretty ◽  
Phil Bones ◽  
J. Geoffrey Chase

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 4084
Author(s):  
Xin-Yu Zhao ◽  
Li-Jing Li ◽  
Lei Cao ◽  
Ming-Jie Sun

Digital cameras obtain color information of the scene using a chromatic filter, usually a Bayer filter, overlaid on a pixelated detector. However, the periodic arrangement of both the filter array and the detector array introduces frequency aliasing in sampling and color misregistration during demosaicking process which causes degradation of image quality. Inspired by the biological structure of the avian retinas, we developed a chromatic LED array which has a geometric arrangement of multi-hyperuniformity, which exhibits an irregularity on small-length scales but a quasi-uniformity on large scales, to suppress frequency aliasing and color misregistration in full color image retrieval. Experiments were performed with a single-pixel imaging system using the multi-hyperuniform chromatic LED array to provide structured illumination, and 208 fps frame rate was achieved at 32 × 32 pixel resolution. By comparing the experimental results with the images captured with a conventional digital camera, it has been demonstrated that the proposed imaging system forms images with less chromatic moiré patterns and color misregistration artifacts. The concept proposed verified here could provide insights for the design and the manufacturing of future bionic imaging sensors.


2021 ◽  
Vol 13 (2) ◽  
pp. 23-35
Author(s):  
Hau Wah Lai ◽  
Cho Man Tsui

This paper presents a t wo-dimensional 10 x 10 LED array system developed in-house at t he Standards and Calibration Laboratory (SCL) for the calibration of timing parameters of still image cameras and video cameras. In this paper, the circuit design and the calibration methods for cameras of different shutter types (rolling shutter or global shutter) are presented. This LED array may also be used to verify the shutter type of cameras. The frequency of the clock signal applied in the calibration is traceable to the SI through the cesium beam frequency standard maintained at SCL.


2021 ◽  
Author(s):  
Dacheng Mao ◽  
Zheshun Xiong ◽  
Matthew Donnelly ◽  
Guangyu Xu
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document