Game-City: a ubiquitous large area multi-interface mixed reality game space for wearable computers

2003 ◽  
Author(s):  
A.D. Cheok ◽  
Fong Siew Wan ◽  
Xubo Yang ◽  
Wang Weihua ◽  
Lee Men Huang ◽  
...  
Keyword(s):  
Mixed Reality ◽  
Wearable Computers ◽  
Large Area

Towards a shared large-area mixed reality system

2016 ◽  
Author(s):  
Naimul Mefraz Khan ◽  
Xiaoming Nan ◽  
Nan Dong ◽  
Yifeng He ◽  
Matthew Kyan ◽  
...  
Keyword(s):  
Mixed Reality ◽  
Large Area

scholarly journals Large Area Robust Hybrid Tracking with Life-size Avatar in Mixed Reality Environment for Cultural and Historical Installation

2009 ◽  
Vol 8 (2) ◽  
pp. 13-18
Author(s):  
William Russell Pensyl ◽  
Tran C. T. Qui ◽  
Pei Fang Hsin ◽  
Shang Ping Lee ◽  
Daniel K. Jernigan
Keyword(s):  
Computer Vision ◽  
Mixed Reality ◽  
Inertial Sensors ◽  
Point Of View ◽  
Historical Narratives ◽  
Large Area ◽  
The Real ◽  
Lighting Conditions ◽  
Low Jitter ◽  
Present World

We have developed a system which enables us to track participant-observers accurately in a large area for the purpose of immersing them in a mixed reality environment. This system is robust even under uncompromising lighting conditions. Accurate tracking of the observer�s spatial and orientation point of view is achieved by using hybrid inertial sensors and computer vision techniques. We demonstrate our results by presenting a life-size, animated human avatar sitting in a real chair, in a stable and low-jitter manner. The system installation allows the observers to freely walk around and navigate themselves in the environment even while still being able to see the avatar from various angles. The project installation provides an exciting way for cultural and historical narratives to be presented vividly in the real present world.

Convergent Beam Electron Diffraction

1978 ◽  
Vol 36 (3) ◽  
pp. 304-315
Author(s):  
G. Lehmpfuhl
Keyword(s):  
Electron Diffraction ◽  
Diffraction Pattern ◽  
Crystal Surface ◽  
Diffraction Spot ◽  
Crystal Thickness ◽  
Large Area ◽  
Electron Microscopic ◽  
Additional Information ◽  
Microscopic Investigations

Introduction In electron microscopic investigations of crystalline specimens the direct observation of the electron diffraction pattern gives additional information about the specimen. The quality of this information depends on the quality of the crystals or the crystal area contributing to the diffraction pattern. By selected area diffraction in a conventional electron microscope, specimen areas as small as 1 µ in diameter can be investigated. It is well known that crystal areas of that size which must be thin enough (in the order of 1000 Å) for electron microscopic investigations are normally somewhat distorted by bending, or they are not homogeneous. Furthermore, the crystal surface is not well defined over such a large area. These are facts which cause reduction of information in the diffraction pattern. The intensity of a diffraction spot, for example, depends on the crystal thickness. If the thickness is not uniform over the investigated area, one observes an averaged intensity, so that the intensity distribution in the diffraction pattern cannot be used for an analysis unless additional information is available.

TEM Study of a Tilt Boundary in Hot-Pressed Silicon

1981 ◽  
Vol 39 ◽  
pp. 160-161
Author(s):  
C. B. Carter ◽  
J. Rose ◽  
D. G. Ast
Keyword(s):  
Electron Diffraction ◽  
Imaging Technique ◽  
Interface Structure ◽  
Large Area ◽  
Weak Beam ◽  
Lattice Fringe ◽  
Electron Diffraction Technique ◽  
Tilt Boundaries ◽  
Beam Technique ◽  
Twist Boundaries

The hot-pressing technique which has been successfully used to manufacture twist boundaries in silicon has now been used to form tilt boundaries in this material. In the present study, weak-beam imaging, lattice-fringe imaging and electron diffraction techniques have been combined to identify different features of the interface structure. The weak-beam technique gives an overall picture of the geometry of the boundary and in particular allows steps in the plane of the boundary which are normal to the dislocation lines to be identified. It also allows pockets of amorphous SiO2 remaining in the interface to be recognized. The lattice-fringe imaging technique allows the boundary plane parallel to the dislocation to be identified. Finally the electron diffraction technique allows the periodic structure of the boundary to be evaluated over a large area - this is particularly valuable when the dislocations are closely spaced - and can also provide information on the structural width of the interface.

P20 phosphor on polyimide as a large area high-resolution transmission screen for slow scan CCD systems

1995 ◽  
Vol 53 ◽  
pp. 20-21
Author(s):  
C. C. Ahn ◽  
S. Karnes ◽  
M. Lvovsky ◽  
C. M. Garland ◽  
H. A. Atwater ◽  
...  
Keyword(s):  
Mechanical Stability ◽  
High Energy ◽  
Practical Implementation ◽  
Line Pair ◽  
Modulation Transfer ◽  
Large Area ◽  
Ccd Imaging ◽  
Transmission Electron ◽  
The One ◽  
Beam Broadening

The bane of CCD imaging systems for transmission electron microscopy at intermediate and high voltages has been their relatively poor modulation transfer function (MTF), or line pair resolution. The problem originates primarily with the phosphor screen. On the one hand, screens should be thick so that as many incident electrons as possible are converted to photons, yielding a high detective quantum efficiency(DQE). The MTF diminishes as a function of scintillator thickness however, and to some extent as a function of fluorescence within the scintillator substrates. Fan has noted that the use of a thin layer of phosphor beneath a self supporting 2μ, thick Al substrate might provide the most appropriate compromise for high DQE and MTF in transmission electron microcscopes which operate at higher voltages. Monte Carlo simulations of high energy electron trajectories reveal that only little beam broadening occurs within this thickness of Al film. Consequently, the MTF is limited predominantly by broadening within the thin phosphor underlayer. There are difficulties however, in the practical implementation of this design, associated mostly with the mechanical stability of the Al support film.

Study of Tip-Surface Interactions in Scanning Tunneling Microscopy (STM) by Reflection Electron Microscopy (REM)

1990 ◽  
Vol 48 (1) ◽  
pp. 320-321
Author(s):  
W. Lo ◽  
J.C.H. Spence ◽  
M. Kuwabara
Keyword(s):  
High Resolution ◽  
Elastic Strain ◽  
Tunneling Current ◽  
Surface Damage ◽  
Surface Interactions ◽  
Graphite Surface ◽  
Scanning Tunneling ◽  
Large Area ◽  
Tunneling Microscopy ◽  
High Resolution Tem

Work on the integration of STM with REM has demonstrated the usefulness of this combination. The STM has been designed to replace the side entry holder of a commercial Philips 400T TEM. It allows simultaneous REM imaging of the tip/sample region of the STM (see fig. 1). The REM technique offers nigh sensitivity to strain (<10−4) through diffraction contrast and high resolution (<lnm) along the unforeshortened direction. It is an ideal technique to use for studying tip/surface interactions in STM.The elastic strain associated with tunnelling was first imaged on cleaved, highly doped (S doped, 5 × 1018cm-3) InP(110). The tip and surface damage observed provided strong evidence that the strain was caused by tip/surface contact, most likely through an insulating adsorbate layer. This is consistent with the picture that tunnelling in air, liquid or ordinary vacuum (such as in a TEM) occurs through a layer of contamination. The tip, under servo control, must compress the insulating contamination layer in order to get close enough to the sample to tunnel. The contaminant thereby transmits the stress to the sample. Elastic strain while tunnelling from graphite has been detected by others, but never directly imaged before. Recent results using the STM/REM combination has yielded the first direct evidence of strain while tunnelling from graphite. Figure 2 shows a graphite surface elastically strained by the STM tip while tunnelling (It=3nA, Vtip=−20mV). Video images of other graphite surfaces show a reversible strain feature following the tip as it is scanned. The elastic strain field is sometimes seen to extend hundreds of nanometers from the tip. Also commonly observed while tunnelling from graphite is an increase in the RHEED intensity of the scanned region (see fig.3). Debris is seen on the tip and along the left edges of the brightened scan region of figure 4, suggesting that tip abrasion of the surface has occurred. High resolution TEM images of other tips show what appear to be attached graphite flakes. The removal of contamination, possibly along with the top few layers of graphite, seems a likely explanation for the observed increase in RHEED reflectivity. These results are not inconsistent with the “sliding planes” model of tunnelling on graphite“. Here, it was proposed that the force due to the tunnelling probe acts over a large area, causing shear of the graphite planes when the tip is scanned. The tunneling current is then modulated as the planes of graphite slide in and out of registry. The possiblity of true vacuum tunnelling from the cleaned graphite surface has not been ruled out. STM work function measurements are needed to test this.

Effects of Using Mixed Reality With Coaching on the Interprofessional Communication Skills of Speech-Language Pathology Graduate Students

2021 ◽  
pp. 1-21
Author(s):  
Jacqueline A. Towson ◽  
Matthew S. Taylor ◽  
Diana L. Abarca ◽  
Claire Donehower Paul ◽  
Faith Ezekiel-Wilder
Keyword(s):  
Graduate Students ◽  
Self Efficacy ◽  
Mixed Reality ◽  
Role Play ◽  
Speech Language Pathology ◽  
Traditional Role ◽  
Allied Health Professionals ◽  
Interprofessional Communication ◽  
Language Pathology ◽  
The Individual

Purpose Communication between allied health professionals, teachers, and family members is a critical skill when addressing and providing for the individual needs of patients. Graduate students in speech-language pathology programs often have limited opportunities to practice these skills prior to or during externship placements. The purpose of this study was to research a mixed reality simulator as a viable option for speech-language pathology graduate students to practice interprofessional communication (IPC) skills delivering diagnostic information to different stakeholders compared to traditional role-play scenarios. Method Eighty graduate students ( N = 80) completing their third semester in one speech-language pathology program were randomly assigned to one of four conditions: mixed-reality simulation with and without coaching or role play with and without coaching. Data were collected on students' self-efficacy, IPC skills pre- and postintervention, and perceptions of the intervention. Results The students in the two coaching groups scored significantly higher than the students in the noncoaching groups on observed IPC skills. There were no significant differences in students' self-efficacy. Students' responses on social validity measures showed both interventions, including coaching, were acceptable and feasible. Conclusions Findings indicated that coaching paired with either mixed-reality simulation or role play are viable methods to target improvement of IPC skills for graduate students in speech-language pathology. These findings are particularly relevant given the recent approval for students to obtain clinical hours in simulated environments.

Illumination from Large Area Light Sources—II

1914 ◽  
Vol 77 (1988supp) ◽  
pp. 82-83
Author(s):  
Herbert E. Ives
Keyword(s):  
Light Sources ◽  
Large Area
Sign in / Sign up

Export Citation Format

Share Document