Improving the Transient Thermal Characterization of GaN HEMTs

Author(s):  
Georges Pavlidis ◽  
Dustin Kendig ◽  
Luke Yates ◽  
Samuel Graham
2005 ◽  
Vol 52 (8) ◽  
pp. 1698-1705 ◽  
Author(s):  
J. Kuzmik ◽  
S. Bychikhin ◽  
M. Neuburger ◽  
A. Dadgar ◽  
A. Krost ◽  
...  

2018 ◽  
Vol 65 (5) ◽  
pp. 1753-1758 ◽  
Author(s):  
Georges Pavlidis ◽  
Dustin Kendig ◽  
Eric R. Heller ◽  
Samuel Graham

Author(s):  
Y. Ezzahri ◽  
R. Singh ◽  
K. Fukutani ◽  
Z. Bian ◽  
A. Shakouri ◽  
...  

Embedded metallic nanoparticles in semiconductors have recently been proven to be of great interest for thermoelectric applications. These metallic nanoparticles play the role of scattering centers for phonons and a source of doping for electrons; they reduce simultaneously the thermal conductivity and increase the thermoelectric power factor of the semiconductor. It has also shown that metal/semiconductor heterostructures can be used to break the crystal momentum symmetry for hot electrons in thermionic devices, then increasing the number of electrons participating in transport. A thermoelectric module of 200 N-P pairs of InGaAlAs with embedded ErAs metallic nanoparticles has been fabricated. Network Identification by Deconvolution (NID) technique is then applied for transient thermal characterization of this thermoelectric module. The combination of this new representation of the dynamic behavior of the packaged device with high resolution thin film temperature measurement allows us to obtain information about heat transfer within the thermoelectric module. This is used to extract the thermal resistances and heat capacitances of the module.


2007 ◽  
Vol 4 (1) ◽  
pp. 23-30 ◽  
Author(s):  
Kimmo Kaija ◽  
Pekka Heino

This paper is a case study of the thermal behavior of a stacked multichip package (SMCP). The aim is to measure temperature responses when heat is dissipated on different dice and to characterize the behavior with a compact thermal model (CTM) that accurately models steady-state and transient responses with a simple thermal RC -network. The measured package consists of three stacked layers, where each layer has one thinned flip chip attached die on an aramid interposer. The package's thermal responses were measured with thermal test dice that contain heaters and temperature sensors. The package was modeled with a finite element method (FEM) and the simulated temperature responses showed reasonable agreement with measured data. The FE model was further used to provide reference thermal data under different boundary conditions for CTM synthesis. The obtained CTM models accurately the steady-state and transient behavior and can be used as simplified model of the measured SMCP for further thermal analysis.


1995 ◽  
Vol 61 (3) ◽  
pp. 253-261 ◽  
Author(s):  
O.W. K�ding ◽  
H. Skurk ◽  
A.A. Maznev ◽  
E. Matthias

Sign in / Sign up

Export Citation Format

Share Document