Improved focus performance of triode structure ZnO-FED with a metal grid

Author(s):  
Yunsong Di ◽  
Wei Lei ◽  
Xiaobing Zhang ◽  
Liang Pan ◽  
Rui Lu ◽  
...  
Keyword(s):  
2021 ◽  
Vol 129 (5) ◽  
pp. 053306
Author(s):  
E. J. Devid ◽  
M. Ronda-Lloret ◽  
D. Zhang ◽  
E. Schuler ◽  
D. Wang ◽  
...  
Keyword(s):  

AMB Express ◽  
2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mohammad Malakootian ◽  
Ali Toolabi ◽  
Saeed Hosseini

AbstractBiological aerated filters (BAFs) have high filtration efficiency due to their tolerance of hydraulic and organic shocks are suitable for the treatment of complex and sanitary wastewater. In this study, for the first time, natural media of date kernel from Bam city was used as the BAF reactor media, with a meshing sand filter separated by a standard metal grid from the natural filter section used at the end of the reactor. This can be considered an innovation in the media and filtration. Aeration in the related reactor with 160 cm height was performed bilaterally as up-flow and continuously by nozzles throughout the reactor media. In this work, the actual effluent of the hospital wastewater treatment plant was employed as the inflow wastewater to the reactor, and its organic and inorganic parameters were measured before and after the treatment by the BAF reactor. The backwashing process was also studied in three ways: bottom backwashing (TB), top backwashing (BB), and top and bottom backwashing (TBBS), to determine the amount of water consumed and to achieve the desired result. According to the results obtained in this study, the removal efficiencies of inorganic and microbial contaminants, amoxicillin and azithromycin were obtained as follows: BOD5: 98.48%, COD: 92.42%, $${\text{NO}}_{3}^{ - }$$ NO 3 - : 99.4%, P: 93.3%, Coliforms: 97%, Color: 42.8%, Turbidity: 95%, Sulphate: 30%, TSS: 98.9%, Amoxicillin: 20% and azithromycin: 13%. In the backwashing process, the amount of water consumed in these three TB, BB, and TBBS methods were obtained 300, 164, and 118 L, respectively, So, TBBS method was selected as the optimal method. Based on the results obtained in this study, it is concluded that the BAF process with natural date kernel has a high efficiency in removing organic and inorganic contaminants from hospital wastewater, also the concentration of most of the effluent parameters was less or in accordance with EPA standard.


Author(s):  
Sergei A. Kuznetsov ◽  
Alexander V. Gelfand ◽  
Alexander A. Mamrashev ◽  
Fedor A. Minakov ◽  
Nazar A. Nikolaev

2009 ◽  
Vol 2009 ◽  
pp. 1-11 ◽  
Author(s):  
Vikrant A. Chaudhari ◽  
Chetan S. Solanki

Use of a solar cell in concentrator PV technology requires reduction in its series resistance in order to minimize the resistive power losses. The present paper discusses a methodology of reducing the series resistance of a commercial c-Si solar cell for concentrator applications, in the range of 2 to 10 suns. Step by step optimization of commercial cell in terms of grid geometry, junction depth, and electroplating of the front metal contacts is proposed. A model of resistance network of solar cell is developed and used for the optimization. Efficiency of unoptimized commercial cell at 10 suns drops by 30% of its 1 sun value corresponding to resistive power loss of about 42%. The optimized cell with grid optimization, junction optimization, electroplating, and junction optimized with electroplated contacts cell gives resistive power loss of 20%, 16%, 11%, and 8%, respectively. An efficiency gain of 3% at 10 suns for fully optimized cell is estimated.


Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 7422
Author(s):  
Min-Kyu Son

Upscaling of photoelectrode for a practical photoelectrochemical (PEC) water splitting system is still challenging because the PEC performance of large-scale photoelectrode is significantly low, compared to the lab scale photoelectrode. In an effort to overcome this challenge, sputtered gold (Au) and copper (Cu) grid lines were introduced to improve the PEC performance of large-scale cuprous oxide (Cu2O) photocathode in this work. It was demonstrated that Cu grid lines are more effective than Au grid lines to improve the PEC performance of large-scale Cu2O photocathode because its intrinsic conductivity and quality of grid lines are better than ones containing Au grid lines. As a result, the PEC performance of a 25-cm2 scaled Cu2O photocathode with Cu grid lines was almost double than one without grid lines, resulting in an improved charge transport in the large area substrate by Cu grid lines. Finally, a 50-cm2 scaled Cu2O photocathode with Cu grid lines was tested in an outdoor condition under natural sun. This is the first outdoor PEC demonstration of large-scale Cu2O photocathode with Cu grid lines, which gives insight into the development of efficient upscaled PEC photoelectrode.


2017 ◽  
Vol 71 (1) ◽  
pp. 548-555
Author(s):  
Sachika TANAKA ◽  
Tadashi ABE ◽  
Keisuke SHIOTA ◽  
Hirotaka NAKAJIMA
Keyword(s):  
Rc Beam ◽  

Sign in / Sign up

Export Citation Format

Share Document