Smart Agriculture Wireless Sensor Routing Protocol and Node Location Algorithm Based on Internet of Things Technology

2020 ◽  
pp. 1-1
Author(s):  
Dingzhu Xue ◽  
Wei Huang
2020 ◽  
Vol 16 (10) ◽  
pp. 155014772096435 ◽  
Author(s):  
Muhammad Ilyas ◽  
Zahid Ullah ◽  
Fakhri Alam Khan ◽  
Muhammad Hasanain Chaudary ◽  
Muhammad Sheraz Arshed Malik ◽  
...  

Internet of things grew swiftly and many services, software, sensors-embedded electronic devices and related protocols were developed and still in progress with full swing. Internet of things enabling physically existing things to see, hear, think and perform a notable task by allowing them to talk to each other and share useful information while making decision and caring-on/out their important tasks. Internet of things is greatly promoted by wireless sensor network as it becomes a perpetual layer for it. Wireless sensor network works as a base-stone for most of the Internet of things applications. There are severe general and specific threats and technical challenges to Internet of things–based sensor networks which must overcome to ensure adaptation and diffusion of it. Most of the limitations of wireless sensor networks are due to its resource constraint objects nature. The specified open research challenges in Internet of things–based sensor network are power consumption, network lifespan, network throughput, routing and network security. To overcome aforementioned problems, this work aimed to prolong network lifetime, improve throughput, decrease packet latency/packet loss and further improvise in encountering malicious nodes. To further tune the network lifetime in terms of energy, wireless harvesting energy is suggested in proposed three-layer cluster-based wireless sensor network routing protocol. The proposed mechanism is a three-tier clustering technique with implanted security mechanism to encounter malicious activities of sensor nodes and to slant them into blacklist. It is a centred-based clustering protocol, where selection of cluster head and grid head is carried out by sink node based on the value of its cost function. Moreover, hardware-based link quality estimators are used to check link effectiveness and to further improve routing efficiency. At the end, excessive experiments have been carried out to check efficacy of the proposed protocol. It outperforms most of its counterpart protocols such as fuzzy logic–based unequal clustering and ant colony optimization–based routing hybrid, Artificial Bee Colony-SD, enhanced three-layer hybrid clustering mechanism and energy aware multi-hop routing in terms of network lifetime, network throughput, average energy consumption and packet latency.


2011 ◽  
Vol 403-408 ◽  
pp. 1696-1699
Author(s):  
Cai Xia Li ◽  
Nai Bo Wang ◽  
Qi Ying Cao ◽  
Hong Gang Liu ◽  
Xin Hua Zhou

Nodes self-localization and routing are two main research issues in wireless sensor networks. There are quite a few publications about sensor network localization or routing protocols, but seldom person combines them in their research work. In this paper, we combine a novel TOA location technique and a new centralized energy-efficient routing protocol. The performance of the combination is then simulated by software. Simulation results show that the routing based on the positions got by our location algorithm is as good as the routing based on true positions and can afford most application demands.


2020 ◽  
Vol 16 (5) ◽  
pp. 155014772091706 ◽  
Author(s):  
Chunling Li ◽  
Ben Niu

With the wide application of Internet of things technology and era of large data in agriculture, smart agricultural design based on Internet of things technology can efficiently realize the function of real-time data communication and information processing and improve the development of smart agriculture. In the process of analyzing and processing a large amount of planting and environmental data, how to extract effective information from these massive agricultural data, that is, how to analyze and mine the needs of these large amounts of data, is a pressing problem to be solved. According to the needs of agricultural owners, this article studies and optimizes the data storage, data processing, and data mining of large data generated in the agricultural production process, and it uses the k-means algorithm based on the maximum distance to study the data mining. The crop growth curve is simulated and compared with improved K-means algorithm and the original k-means algorithm in the experimental analysis. The experimental results show that the improved K-means clustering method has an average reduction of 0.23 s in total time and an average increase of 7.67% in the F metric value. The algorithm in this article can realize the functions of real-time data communication and information processing more efficiently, and has a significant role in promoting agricultural informatization and improving the level of agricultural modernization.


2014 ◽  
Vol 945-949 ◽  
pp. 1552-1557 ◽  
Author(s):  
Yi Lin Zheng ◽  
Hu Lin ◽  
Xian Li Su

Aiming at the shortcomings of the traditional CNC sensor network such as the difficult cable laying and long-distance communication signal attenuation, this paper designed the CNC monitoring system based on Internet of Things technology. The design reduced the power consumption of the wireless sensor nodes and the packet loss rate of the sink nodes through the hardware-software co-design. The Internet of Things protocol presented in this paper achieved the real-time communication between the CNC operating platform and the wireless sensor nodes. The experiment result shows that the CNC monitoring system based on Internet of Things technology can provide the temperature and vibration information for the CNC operating platform in time with the advantages of simple layout and reliable communication.


2014 ◽  
Vol 602-605 ◽  
pp. 966-969
Author(s):  
Da Wei Xu ◽  
Shan Ren ◽  
Cun Jiang Yu

This paper proposes a RFID multi criteria based on Internet of things technology set don't equipment, information RFID electronic label this equipment can automatically identify objects, has high reliability, information processing capability, low power consumption, strong confidentiality.


Sign in / Sign up

Export Citation Format

Share Document