scholarly journals Trust-based energy-efficient routing protocol for Internet of things–based sensor networks

2020 ◽  
Vol 16 (10) ◽  
pp. 155014772096435 ◽  
Author(s):  
Muhammad Ilyas ◽  
Zahid Ullah ◽  
Fakhri Alam Khan ◽  
Muhammad Hasanain Chaudary ◽  
Muhammad Sheraz Arshed Malik ◽  
...  
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Networks ◽  
Internet Of Things ◽  
Sensor Network ◽  
Network Lifetime ◽  
Routing Protocol ◽  
Network Throughput ◽  
Link Quality ◽  
Wireless Sensor ◽  
Packet Latency

Internet of things grew swiftly and many services, software, sensors-embedded electronic devices and related protocols were developed and still in progress with full swing. Internet of things enabling physically existing things to see, hear, think and perform a notable task by allowing them to talk to each other and share useful information while making decision and caring-on/out their important tasks. Internet of things is greatly promoted by wireless sensor network as it becomes a perpetual layer for it. Wireless sensor network works as a base-stone for most of the Internet of things applications. There are severe general and specific threats and technical challenges to Internet of things–based sensor networks which must overcome to ensure adaptation and diffusion of it. Most of the limitations of wireless sensor networks are due to its resource constraint objects nature. The specified open research challenges in Internet of things–based sensor network are power consumption, network lifespan, network throughput, routing and network security. To overcome aforementioned problems, this work aimed to prolong network lifetime, improve throughput, decrease packet latency/packet loss and further improvise in encountering malicious nodes. To further tune the network lifetime in terms of energy, wireless harvesting energy is suggested in proposed three-layer cluster-based wireless sensor network routing protocol. The proposed mechanism is a three-tier clustering technique with implanted security mechanism to encounter malicious activities of sensor nodes and to slant them into blacklist. It is a centred-based clustering protocol, where selection of cluster head and grid head is carried out by sink node based on the value of its cost function. Moreover, hardware-based link quality estimators are used to check link effectiveness and to further improve routing efficiency. At the end, excessive experiments have been carried out to check efficacy of the proposed protocol. It outperforms most of its counterpart protocols such as fuzzy logic–based unequal clustering and ant colony optimization–based routing hybrid, Artificial Bee Colony-SD, enhanced three-layer hybrid clustering mechanism and energy aware multi-hop routing in terms of network lifetime, network throughput, average energy consumption and packet latency.

scholarly journals JSMCRP: Cross-Layer Architecture based Joint-Synchronous MAC and Routing Protocol for Wireless Sensor Network

2021 ◽  
Vol 19 (1) ◽  
pp. 94-113
Author(s):  
Shruti Birur Viswanath ◽  
Thippeswamy Muddenahalli Nagendrappa ◽  
Krishna Rao Venkatesh
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Routing Protocol ◽  
Communication Systems ◽  
Ieee 802.15.4 ◽  
Dynamic Network ◽  
Link Quality ◽  
Wireless Sensor ◽  
Cross Layer ◽  
Monitoring And Control

The exponential rise in wireless technologies and allied applications has revitalized academia-industries to develop more efficient and economic routing solution to meet Quality-of-Service (QoS) provision. Amongst the major wireless communication systems, Wireless Sensor Network (WSN) is the most sought technology for defense surveillance, healthcare monitoring, industrial monitoring and control, civic and strategic infrastructure surveillance etc. Additionally, the up surge in Internet of Things (IoT) and Machine to Machine (M2M) communication systems too have broadened the horizon for WSNs based communication. However, the parallel increase in communication environment, complex network conditions etc confine efficacy of the classical WSN protocols. Dynamic network and node conditions often force classical protocols to undergo pre-mature link outage, delayed transmission, energy exhaustion and eventual QoS violation. To address such issues enhancing Median Access Control (MAC) and allied routing decision can have vital significance. However major existing efforts either focus on MAC enhancement or routing optimization, even under static WSN topology. Considering it as motive in this paper a highly robust “Cross-layer architecture based Joint-Synchronous MAC and Routing Protocol for WSN communication (JSMCRP)” has been developed. Being cross layer model JSMCRP protocol employs Application Layer, Network Layer, MAC Layer and PHY Layer to perform Network Adaptive MAC scheduling and Dynamic Routing Decision. JSMCRP employs Data Traffic Assessment, Prioritization and Scheduling (DTAPS), Proactive Network Monitoring and Knowledge (PNMK), Dynamic Congestion Index Estimation (DCIE), Adaptive Link Quality, Packet Injection Rate and Cumulative Rank Sensitive Routing Decision (CRSRD) to perform routing decision. Additionally, exploiting dynamic network/node conditions it performs Cognitive MAC scheduling to ensure QoS centric communication over IEEE 802.15.4 protocol stack. JSMCRP exhibited higher PDR, lower PLR and low delay under varying network conditions, suitable for real-time communication over constrained mobile WSN conditions.

Power Layer Energy Efficient Routing Protocol in Wireless Sensor Network (PLRP)

2013 ◽  
Vol 5 (1) ◽  
pp. 57-68 ◽  
Author(s):  
Sardjoeni Moedjiono ◽  
Aries Kusdaryono
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Network Lifetime ◽  
Routing Protocol ◽  
Energy Efficient ◽  
Sensor Node ◽  
Base Station ◽  
Wireless Sensor ◽  
Energy Usage ◽  
Energy Efficient Routing

Preserving energy of sensor node in wireless sensor network is an effort to prolong the lifetime of network. Energy of sensor node is very crucial because battery powered and irreplaceable. Energy conservation of sensor node is an effort to reduce energy consumption in order to preserve resource for network lifetime. It can be achieved through efficient energy usage by reducing consumption of energy or decrease energy usage while achieving a similar outcome. In this paper, the authors propose power layer energy efficient routing protocol in wireless sensor network, named PLRP, which use power control and multi-hop routing protocol to control overhead of sensor node and create clustering to distribute energy dissipation and increase energy efficiency of all sensor node. The main idea of PLRP is the use of power control, which divide sensor node into group by base station uses layer of energy and maximize the computation energy in base station to reduce computational energy in sensor node for conservation of network lifetime. The performance of PLRP compared to BCDCP and BIDRP based of hierarchical routing protocol. The simulation results show that PLRP achieve 25% and 30% of improvement on network lifetime.

Performance Analysis of Multi-Hop Routing Protocol With Optimized Grid-Based Clustering for Wireless Sensor Network

2020 ◽  
pp. 254-282
Author(s):  
Saloni Dhiman ◽  
Deepti Kakkar ◽  
Gurjot Kaur
Keyword(s):  
Wireless Sensor Networks ◽  
Wireless Sensor Network ◽  
Sensor Networks ◽  
Performance Analysis ◽  
Sensor Network ◽  
Routing Protocol ◽  
Base Station ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Grid Based

Wireless sensor networks (WSNs) consist of several sensor nodes (SNs) that are powered by battery, so their lifetime is limited, which ultimately affects the lifespan and hence performance of the overall networks. Till now many techniques have been developed to solve this problem of WSN. Clustering is among the effective technique used for increasing the network lifespan. In this chapter, analysis of multi-hop routing protocol based on grid clustering with different selection criteria is presented. For analysis, the network is divided into equal-sized grids where each grid corresponds to a cluster and is assigned with a grid head (GH) responsible for collecting data from each SN belonging to respective grid and transferring it to the base station (BS) using multi-hop routing. The performance of the network has been analyzed for different position of BS, different number of grids, and different number of SNs.

A DEPLOYMENT ALGORITHM FOR UNDERWATER SENSOR NETWORKS IN OCEAN ENVIRONMENT

2011 ◽  
Vol 20 (06) ◽  
pp. 1051-1066 ◽  
Author(s):  
LINFENG LIU
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Networks ◽  
Sensor Network ◽  
Network Lifetime ◽  
Wireless Sensor ◽  
Underwater Sensor Networks ◽  
Cluster Shape ◽  
Simulation Results ◽  
Ocean Environment ◽  
Near Future

Underwater sensor networks will find many oceanic applications in near future, and the deployment problem in 3D sensor networks has not been paid enough attention at present. In order to maximize the network lifetime, a deployment algorithm (UDA) for underwater sensor networks in ocean environment is proposed. UDA can determine and select the best cluster shape, then partition the space into layers and clusters while maintaining full coverage and full connectivity. In addition, nodes closer to sinks are possible to bear a heavier data-relaying mission. UDA sets different node deployment densities at different layers in response to the potential relay discrepancy. The simulation results suggest UDA can choose the proper cluster shape to get the maximum underwater wireless sensor network lifetime approximately.

scholarly journals Routing of emergency data in a wireless sensor network for mining applications

2021 ◽  
Author(s):  
Mandana Jafarian
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Network Lifetime ◽  
Routing Protocol ◽  
Residual Energy ◽  
Mesh Network ◽  
Wireless Sensor ◽  
End To End Delay ◽  
Simulation Results ◽  
End To End

Emergency situations in mines result in loss of precious human lives. In this thesis we discussed architecture of a Wireless Sensor Network (WSN) that can be deployed in mines, which takes care of severe geographical and environmental constraints found inside mines. The proposed architecture is a two-level hierarchy of small sized WSNs that employs a wireless Mesh network as the backbone connecting small sized WSNs scattered inside mines. We proposed a routing protocol for that WSN that is optimized for both emergency and non-emergency data routing. Since our main goal is to provide safety in the mining environment, the main consideration of the routing protocol is to provide reliability and reduce the end-to-end delay for vital emergency traffic while optimizing for network longevity for non-emergency traffic. We present a new cost-based routing protocol called MDML, which provides Minimum Delay and Maximum Lifetime routing for such networks. The proposed MDML routing defines separate cost metrics for emergency and non-emergency traffic. It finds the least-cost path for the reliable delay-constrained emergency traffic with regards to link error rate but also gives secondary consideration to nodes' residual energy. It is an energy efficient routing scheme for non-emergency or regular data traffic routing that maximizes the network lifetime. However, for emergency traffic energy efficiency is compromised to achieving minimal delay. Regular traffic is generated through periodic monitoring and is delay-insensitive. For regular traffic delivery, a shortest path routinig algorithm is employed which uses link costs that reflect both the communication energy consumption rates and the residual energy levels at the two end nodes. Simulation results show that using the proposed emergency routes reduces the end-to-end delay for emergency traffic. The effect of protocol update cycle on increasing the network lifetime is verified true simulation. MDML is also compared with a simulated non-MDML approach to compare the lifetime and delay performance. Simulation results have demonstrated the effectiveness of our approach.

scholarly journals ENERGY EFFICIENT ROUTING PROTOCOL FOR INCREASING LIFETIME OF WIRELESS SENSOR NETWORK

2020 ◽  
Vol 5 (2) ◽  
pp. 240-248
Author(s):  
Tanya Pathak ◽  
Vinay Kumar Singh ◽  
Anurag Sharma
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Network Lifetime ◽  
Routing Protocol ◽  
Routing Protocols ◽  
Energy Efficient ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Efficient Design ◽  
Energy Efficient Routing

In the recent years, an efficient design of a Wireless Sensor Network has become important in the area of research. The major challenges in the design of Wireless Sensor Network is to improve the network lifetime. The main difficulty for sensor node is to survive in that monitoring area for the longer time that means there is a need to increase the lifetime of the sensor nodes by optimizing the energy and distance. There are various existing routing protocols in which optimal routing can be achieved like Data-Centric, Hierarchical and Location-based routing protocols. In this paper, new power efficient routing protocol is being proposed that not only select the shortest path between the source node and sink node for data transmission but also maximizes the lifetime of the participating nodes by selecting the best path for sending the data packet across the network. The main objective of this research is to develop a faster algorithm to find the energy efficient route for Wireless Sensor Network. Simulation results shows that this strategy achieves long network lifetime when compared to the other standard protocols.

Presenting the Hybrid Algorithm of Honeybee - Harmony in Clustering and Routing of Wireless Sensor Networks

2019 ◽  
Vol 9 (3) ◽  
pp. 357-371
Author(s):  
Mohammad Sedighimanesh ◽  
Hesam Zandhesami ◽  
Ali Sedighimanesh
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Wireless Sensor Network ◽  
Sensor Networks ◽  
Sensor Network ◽  
Network Lifetime ◽  
Cluster Head ◽  
Rechargeable Batteries ◽  
Base Station ◽  
Wireless Sensor

Background: Wireless sensor networks are considered as one of the 21st century's most important technologies. Sensors in wireless sensor networks usually have limited and sometimes non-rechargeable batteries, which they are supposed to be preserved for months or even years. That's why the energy consumption in these networks is of a great importance. Objective: One way to improve energy consumption in a wireless sensor network is to use clustering. In clustered networks, one node is known as the cluster head and other nodes as normal members, which normal nodes send the collected data to the cluster head, and the cluster head sends the information to the base station either by a single step or by multiple steps. Method: Using clustering simplifies resource management and increases scalability, reliability, and the network lifetime. Although the cluster formation involves a time- overhead and how to choose the cluster head is another problem, but its advantages are more than its disadvantages. : The primary aim of this study is to offer a solution to reduce energy consumption in the sensor network. In this study, during the selection of cluster heads, Honeybee Algorithm is used and also for routing, Harmonic Search Algorithm is used. In this paper, the simulation is performed by using MATLAB software and the proposed method is compared with the Low Energy Adaptive Clustering Hierarchy (LEACH) and the multi-objective fuzzy clustering algorithm (MOFCA). Result and Conclusion: By simulations of this study, we conclude that this research has remarkably increased the network lifetime with respect to EECS, LEACH, and MOFCA algorithms. In view of the energy constraints of the wireless sensor network and the non-rechargeable batteries in most cases, providing such solutions and using metaheuristic algorithms can result in a significant reduction in energy consumption and, consequently, increase in the network lifetime.

Sign in / Sign up

Export Citation Format

Share Document