Height Difference Determination using Smartphones Based Accelerometers

2021 ◽  
pp. 1-1
Author(s):  
Smadar Boim ◽  
Gilad Even-Tzur ◽  
Itzik Klein
Keyword(s):  
2019 ◽  
Vol 14 (6) ◽  
pp. 957-966
Author(s):  
Richard L. Cahanin IV ◽  
John R. Jefferson ◽  
Timothy W. Flynn ◽  
Nicholas Goyeneche

Molecules ◽  
2021 ◽  
Vol 26 (8) ◽  
pp. 2393
Author(s):  
Artur Trembułowicz ◽  
Agata Sabik ◽  
Miłosz Grodzicki

The surface of quasi-hexagonal reconstructed Au(100) is used as the template for monolayer pentacene (PEN) self-assembly. The system is characterized by means of scanning tunneling microscopy at room temperature and under an ultra-high vacuum. A new modulated pattern of molecules with long molecular axes (MA) arranged along hex stripes is found. The characteristic features of the hex reconstruction are preserved herein. The assembly with MA across the hex rows leads to an unmodulated structure, where the molecular layer does not recreate the buckled hex phase. The presence of the molecules partly lifts the reconstruction—i.e., the gold hex phase is transformed into a (1×1) phase. The arrangement of PEN on the gold (1×1) structure is the same as that of the surrounding molecular domain on the reconstructed surface. The apparent height difference between phases allows for the distinction of the state of the underlying gold surface.


2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Takashi Yatsui ◽  
Wataru Nomura ◽  
Motoichi Ohtsu

We compared dressed-photon-phonon (DPP) etching to conventional photochemical etching and, using a numerical analysis of topographic images of the resultant etched polymethyl methacrylate (PMMA) substrate, we determined that the DPP etching resulted in the selective etching of smaller scale structures in comparison with the conventional photochemical etching. We investigated the wavelength dependence of the PMMA substrate etching using an O2 gas. As the dissociation energy of O2 is 5.12 eV, we applied a continuous-wave (CW) He-Cd laser (λ= 325 nm, 3.81 eV) for the DPP etching and a 5th-harmonic Nd:YAG laser (λ= 213 nm, 5.82 eV) for the conventional photochemical etching. From the obtained atomic force microscope images, we confirmed a reduction in surface roughness, Ra, in both cases. However, based on calculations involving the standard deviation of the height difference function, we confirmed that the conventional photochemical etching method etched the larger scale structures only, while the DPP etching process selectively etched the smaller scale features.


2021 ◽  
Vol 21 (1) ◽  
Author(s):  
P. López-Jarana ◽  
C. M. Díaz-Castro ◽  
A. Falcão ◽  
C. Falcão ◽  
J. V. Ríos-Santos ◽  
...  

Abstract Background The objective of this study was to measure two parameters involved in tri-dimensional implant planning: the position of the buccal and palatal bone wall and the palatal thickness. Methods Cone beam computed tomography (CBCT) images (Planmeca ProMax 3D) of 403 teeth (208 upper teeth and 195 lower teeth) were obtained from 49 patients referred to the Dental School of Seville from January to December 2014. The height difference between the palatal and buccal walls was measured on the most coronal point of both walls. The thickness of the palatal wall was measured 2 mm from the most coronal point of the palatal wall. Results The mean values in the maxilla were 1.7 ± 0.9 mm for central and lateral incisors, 2.2 ± 1.7 mm for canines, 1.6 ± 0.9 mm for premolars and 1.9 ± 1.5 mm for molars. In the lower jaw, the mean values were 1.3 ± 0.8 mm for incisors, 1.7 ± 1.2 mm for canines, 2.3 ± 1.3 mm for premolars, and 2.6 ± 1.7 mm for molars. In the upper jaw, more than 55% of maxillary teeth (excluding second premolars and molars) presented mean height differences greater than 1 mm. In the mandible, more than 60% of incisors showed a buccal bone thickness of 1 mm from the apical to lingual aspect. All teeth except the second premolar presented a buccal wall located more than 1 mm more apically than the lingual bone wall. Conclusions The buccal bone wall is located more apically (greater than 1 mm) than the palatal or lingual table in most of the cases assessed. The thickness of the palatal or lingual table is also less than 2 mm in the maxilla and mandible, except in the upper canines and premolars and the lower molars.


2021 ◽  
Vol 87 (9) ◽  
pp. 615-630
Author(s):  
Longjie Ye ◽  
Ka Zhang ◽  
Wen Xiao ◽  
Yehua Sheng ◽  
Dong Su ◽  
...  

This paper proposes a Gaussian mixture model of a ground filtering method based on hierarchical curvature constraints. Firstly, the thin plate spline function is iteratively applied to interpolate the reference surface. Secondly, gradually changing grid size and curvature threshold are used to construct hierarchical constraints. Finally, an adaptive height difference classifier based on the Gaussian mixture model is proposed. Using the latent variables obtained by the expectation-maximization algorithm, the posterior probability of each point is computed. As a result, ground and objects can be marked separately according to the calculated possibility. 15 data samples provided by the International Society for Photogrammetry and Remote Sensing are used to verify the proposed method, which is also compared with eight classical filtering algorithms. Experimental results demonstrate that the average total errors and average Cohen's kappa coefficient of the proposed method are 6.91% and 80.9%, respectively. In general, it has better performance in areas with terrain discontinuities and bridges.


2002 ◽  
Vol 30 (4) ◽  
pp. 479-482 ◽  
Author(s):  
Theodore F. Schlegel ◽  
Martin Boublik ◽  
Richard J. Hawkins ◽  
J. Richard Steadman

Background Heel-height difference has been used to detect subtle knee flexion contractures, but the effects of thigh circumference differences and patient positioning during testing have not been evaluated. Hypothesis Differences in thigh circumference measurements and whether the patient's patellae are on or off the examination table during heel-height difference measurement will not affect the accuracy of detecting knee flexion contracture. Study Design Prospective cohort study. Methods Bilateral knee range of motion, prone heel-height difference with the patellae on and off the table, and thigh circumference at 5 and 15 cm proximal to the proximal pole of the patella were measured by one investigator on 50 consecutive patients who had undergone unilateral anterior cruciate ligament reconstruction. Results A high degree of correlation was demonstrated between the heel-height difference and the standard range of motion measurement. Differences in thigh girth and patellar position did not statistically affect the accuracy of the heel-height difference as an indicator of knee flexion contracture. Conclusion Heel-height difference is a valid method of documenting knee flexion contractures. Compared with traditional goniometer assessment, this test is a more meaningful and easier way for detecting subtle knee flexion contractures of less than 10°.


Author(s):  
Abbas Torabizadeh ◽  
Hamid-Reza Ghafouri ◽  
Mohamadreza Majdzadehtabatabai ◽  
Ahmad Tahershamsi

The bed of the step-pool rivers is adapted to the flow conditions in terms of the topographic position and the steep slope of the path in such a way to dissipate the water energy, along the river. The beds of these rivers is sinusoidal like the meander rivers. However, as the river banks are mostly rocky in mountainous areas and the erosion in these areas is less, the bed fluctuation of these reaches is mainly vertical. When the water flow streams from the step crest into the pool, most of the water energy dissipates. In addition to the height difference, other factors contribute to the energy dissipation in the step pool reaches. The present study examines the energy dissipation by determining its effective factors, including step height (H), step length (L), hydraulic radius (R), sediment material diameter (d84), velocity in the step (V), etc. by field measurements in three reaches of mountain rivers. In the same vein, an equation is provided to estimate energy dissipation in the step pool reaches, by considering measurable effective parameters.


2005 ◽  
Vol 21 (3) ◽  
pp. 317-328 ◽  
Author(s):  
E. V. J. Tanner ◽  
V. K. Teo ◽  
D. A. Coomes ◽  
J. J. Midgley

To investigate whether seedlings of ten dipterocarp species differed significantly in terms of growth and mortality or whether species were not significantly different and could be considered ecologically similar, seedlings were grown, two per pot, in two experiments: (1) where the two seedlings were of equal height (30 cm); and (2) where one seedling was 10 cm shorter than the other. Seedlings were grown in a shade house with 15% above-canopy light in a 50:50 forest soil–sand mixture and were watered frequently; pots were placed so that seedling density was 130 seedlings m−2 of ground. In the first experiment there were 45 pairwise combinations of species when seedlings were 30 cm tall (AB, AC, AD,…. BC, BD…IJ; where A, B, C…J signify different species); each combination was replicated 10 times so there were 450 pots with 900 seedlings. In the second experiment there were 100 pairwise combinations of species and size e.g. Aa (30 cm A with 20 cm a), Ab (30 cm A with 20 cm b), each combination was replicated 10 times hence there were 1000 pots with 2000 seedlings. After 22 mo 79% of the initial 2900 seedlings survived; on average they had grown 42 cm (i.e. to 72 cm tall from their initial 30 cm). The most frequent outcome of competition-trials between different sized individuals (784 of 1000 trials) was that the initially taller seedling of each pair ‘won’ (it was the taller or surviving seedling). When 900 of these trials (setting aside, Aa, Bb, Cc etc.) were analysed as 45 comparisons between species with different sized individuals (Ab and aB are one interspecific comparison for these purposes), initial height determined the outcome in 23 cases (even in some competitions between light hardwood species and heavy hardwood species); in 6 cases a species (mostly light hardwoods) behaved as a ‘dominant’ – they usually won even if they were smaller initially. We found few significant differences between species in: initial seedling heights; leaf nitrogen concentrations; and specific leaf areas when they were grown in similar conditions, and these attributes were not correlated with growth rates. The similarity of seedlings of different species meant that often a height difference of just 10 cm was enough to determine the outcome of a pairwise competition-trial in high seedling densities and light equivalent to that in forest gaps.


2007 ◽  
Vol 1039 ◽  
Author(s):  
Yuki Kudo ◽  
Takatoshi Yamada ◽  
Hisato Yamaguchi ◽  
Tomoaki Masuzawa ◽  
Ichitaro Saito ◽  
...  

AbstractIn this paper, we measured the field emission properties of reconstructed P-doped diamond under various anode-diamond distances and compared with the oxidized surface. Voltage drops in the vacuum was estimated to be 4.95 and 26.6 V/μm for the reconstructed and the oxidized, respectively. Moreover, we calculated the barrier height ratio between each surface. Our data indicates the changes in electron affinity strongly affect on the field emission properties.


Sign in / Sign up

Export Citation Format

Share Document