Low Damage,>tex<$hbox Cl_2$>/tex<-Based Gate Recess Etching for 0.3->tex<$muhbox m$>/tex<Gate-Length AlGaN/GaN HEMT Fabrication

2004 ◽  
Vol 25 (2) ◽  
pp. 52-54 ◽  
Author(s):  
W.-K. Wang ◽  
Y.-J. Li ◽  
C.-K. Lin ◽  
Y.-J. Chan ◽  
G.-T. Chen ◽  
...  
Keyword(s):  
Gan Hemt ◽  
2005 ◽  
Vol 26 (1) ◽  
pp. 5-7 ◽  
Author(s):  
Wen-Kai Wang ◽  
Po-Chen Lin ◽  
Ching-Huao Lin ◽  
Cheng-Kuo Lin ◽  
Yi-Jen Chan ◽  
...  

2020 ◽  
Vol 20 (16) ◽  
pp. 8947-8955
Author(s):  
Robert Sokolovskij ◽  
Jian Zhang ◽  
Hongze Zheng ◽  
Wenmao Li ◽  
Yang Jiang ◽  
...  
Keyword(s):  
Gan Hemt ◽  

2021 ◽  
Author(s):  
Peng Cui ◽  
Yuping Zeng

Abstract Due to the low cost and the scaling capability of Si substrate, InAlN/GaN high-electron-mobility transistors (HEMTs) on silicon substrate have attracted more and more attentions. In this paper, a high-performance 50-nm-gate-length InAlN/GaN HEMT on Si with a high on/off current (Ion/Ioff) ratio of 7.28 × 106, an average subthreshold swing (SS) of 72 mV/dec, a low drain-induced barrier lowing (DIBL) of 88 mV, an off-state three-terminal breakdown voltage (BVds) of 36 V, a current/power gain cutoff frequency (fT/fmax) of 140/215 GHz, and a Johnson’s figure-of-merit (JFOM) of 5.04 THz∙V is simultaneously demonstrated. The device extrinsic and intrinsic parameters are extracted using equivalent circuit model, which is verified by the good agreement between simulated and measured S-parameter values. Then the scaling behavior of InAlN/GaN HEMTs on Si is predicted using the extracted extrinsic and intrinsic parameters of devices with different gate lengths (Lg). It presents that a fT/fmax of 230/327 GHz can be achieved when Lg­ scales down to 20 nm with the technology developed in the study, and an improved fT/fmax of 320/535 GHz can be achieved on a 20-nm-gate-length InAlN/GaN HEMT with regrown ohmic contact technology and 30% decreased parasitic capacitance. This study confirms the feasibility of further improvement of InAlN/GaN HEMTs on Si for RF applications.


1999 ◽  
Vol 43 (8) ◽  
pp. 1527-1533 ◽  
Author(s):  
D Xu ◽  
T Suemitsu ◽  
H Yokoyama ◽  
Y Umeda ◽  
Y Yamane ◽  
...  

2022 ◽  
Vol 161 ◽  
pp. 110418
Author(s):  
Salah Saadaoui ◽  
Olfa Fathallah ◽  
Hassen Maaref

2013 ◽  
Vol 347-350 ◽  
pp. 1790-1792
Author(s):  
Xiao Wei Zhang ◽  
Ke Jin Jia ◽  
Yuan Gang Wang ◽  
Zhi Hong Feng ◽  
Zheng Ping Zhao

The GaN HEMT is widely used in high-frequency aspects, use the T-gate to reduce gate resistance is one of the most effective methods to improve the the device maximum oscillation frequency (fmax). But fmax is very sensitive to T-gate size, improper selection may reduce fmax, Therefore, in order to reduce the cost of production, it is necessary to select appropriate simulation T-gate size. We have worked out AlGaN/GaN HEMT with gate length of 0.17μm and fmax values 110GHz. Accuracy of the simulation model is verified by experiment. Then detailed simulates the impact of the T-gate size and we obtain ptimized T-gate size range.


Author(s):  
Fabian Thome ◽  
Erdin Ture ◽  
Peter Bruckner ◽  
Rudiger Quay ◽  
Oliver Ambacher
Keyword(s):  
Gan Hemt ◽  

Sign in / Sign up

Export Citation Format

Share Document