Characterizing the Solar Irradiation by Means of Spectral Measurements for Modeling CPV Production

Author(s):  
Dario A. Ronzio ◽  
Elena Collino
2020 ◽  
Vol 2020 (1) ◽  
pp. 60-64
Author(s):  
Altynay Kadyrova ◽  
Majid Ansari-Asl ◽  
Eva Maria Valero Benito

Colour is one of the most important appearance attributes in a variety of fields including both science and industry. The focus of this work is on cosmetics field and specifically on the performance of the human visual system on the selection of foundation makeup colour that best matches with the human skin colour. In many cases, colour evaluations tend to be subjective and vary from person to person thereby producing challenging problems to quantify colour for objective evaluations and measurements. Although many researches have been done on colour quantification in last few decades, to the best of our knowledge, this is the first study to evaluate objectively a consumer's visual system in skin colour matching through a psychophysical experiment under different illuminations exploiting spectral measurements. In this paper, the experiment setup is discussed and the results from the experiment are presented. The correlation between observers' skin colour evaluations by using PANTONE Skin Tone Guide samples and spectroradiometer is assessed. Moreover, inter and intra observer variability are considered and commented. The results reveal differences between nine ethnic groups, between two genders, and between the measurements under two illuminants (i.e.D65 and F (fluorescent)). The results further show that skin colour assessment was done better under D65 than under F illuminant. The human visual system was three times worse than instrument in colour matching in terms of colour difference between skin and PANTONE Skin Tone Guide samples. The observers tend to choose lighter, less reddish, and consequently paler colours as the best match to their skin colour. These results have practical applications. They can be used to design, for example, an application for foundation colour selection based on correlation between colour measurements and human visual system based subjective evaluations.


1995 ◽  
Author(s):  
Mohammad Rob ◽  
Larry Mack, H, Jr ◽  
Sivaram Arepalli ◽  
Carl Scott

2019 ◽  
Vol 17 (3) ◽  
Author(s):  
Lamhot P. Manalu

Crop drying is essential for preservation in agricultural applications. It is performed either using fossil fuels in an artificial mechanical drying process or by placing the crop under the open sun. The first method is costly and has a negative impact on the environment, while the second method is totally dependent on the weather. The drying process requires a lot of energy in relation to the amount of water that must be evaporated from the product. It is estimated that 12% of the total energy used by the food industries and agriculture absorbed in this process. Due to the limitation of energy resources, it is important to keep researching and developing of diversification and optimization of energy This study aims to assess the use of energy for cocoa drying using solar energy dryer and bin-type dryer, as well as to determine the drying efficiency of each type of dryer. The results showed that the efficiency of the solar dryer drying system ranges between 36% to 46%, while the tub-type dryers between 21.7% to 33.1%. The specific energy of solar dryer ranged from 6.17-7.87 MJ / kg, while the tub-type dryers 8.58-13.63 MJ / kg. Dryer efficiency is influenced by the level of solar irradiation and the amount of drying load, the higher the irradiation received and more cocoa beans are dried, the drying efficiency is also higher and the specific energy further down.Proses pengeringan memerlukan banyak energi sehubungan dengan banyaknya air yang harus diuapkan dari bahan yang dikeringkan. Pengeringan dapat dilakukan dengan menggunakan pengering mekanis berbahan bakar fosil atau dengan menempatkan produk di bawah matahari terbuka. Metode pertama adalah mahal dan memiliki dampak negatif pada lingkungan, sedangkan metode kedua sangat tergantung pada cuaca. Diperkirakan bahwa 12% dari total energi yang dipergunakan oleh industri pangan dan pertanian diserap untuk proses ini. Mengingat semakin terbatasnya sumber energi bahan bakar minyak maka usaha diversifikasi dan optimasi energi untuk pengeringan perlu terus diteliti dan dikembangkan. Salah satunya adalah pemanfaatan energi surya sebagai sumber energi terbarukan. Penelitian ini bertujuan untuk mengkaji penggunaan energi untuk pengeringan kakao dengan memakai pengering energi surya dan pengering tipe bak, serta untuk mengetahui efisiensi pengeringan dari masing-masing tipe pengering. Hasil kajian menunjukkan bahwa efisiensi total sistem pengeringan alat pengering surya berkisar antara 36% dan 46%, sedangkan pengering tipe bak antara 21.7% dan 33.1%. Kebutuhan energi spesifik alat pengering surya berkisar antara 6.17-7.87 MJ/kg, sedangkan alat pengering tipe bak 8.58-13.63 MJ/kg. Efisiensi alat pengering dipengaruhi oleh tingkat iradiasi surya dan jumlah beban pengeringan, semakin tinggi iradiasi yang diterima pengering serta semakin banyak biji kakao yang dikeringkan, maka efisiensi pengeringan juga semakin tinggi dan kebutuhan energi spesifik semakin turun.Keywords: energy, efficiency, cocoa, solar dryer, bin-type dryer.


Jurnal MIPA ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 181
Author(s):  
Imriani Moroki ◽  
Alfrets Septy Wauran

Energi terbarukan adalah salah satu masalah energi paling terkenal saat ini. Ada beberapa sumber potensial energi terbarukan. Salah satu energi terbarukan yang umum dan sederhana adalah energi matahari. Masalah besar ketersediaan energi saat ini adalah terbatasnya sumber energi konvensional seperti bahan bakar. Ini semua sumber energi memiliki banyak masalah karena memiliki jumlah energi yang terbatas. Penting untuk membuat model dan analisis berdasarkan ketersediaan sumber energi. Energi matahari adalah energi terbarukan yang paling disukai di negara-negara khatulistiwa saat ini. Tergantung pada produksi energi surya di daerah tertentu untuk memiliki desain dan analisis energi matahari yang baik. Untuk memiliki analisis yang baik tentang itu, dalam makalah ini kami membuat model prediksi energi surya berdasarkan data iradiasi matahari. Kami membuat model energi surya dan angin dengan menggunakan Metode Autoregresif Integrated Moving Average (ARIMA). Model ini diimplementasikan oleh R Studio yang kuat dari statistik. Sebagai hasil akhir, kami mendapatkan model statistik solar yang dibandingkan dengan data aktualRenewable energy is one of the most fomous issues of energy today. There are some renewable energy potential sources. One of the common n simple renewable energy is solar energy. The big problem of the availability of energy today is the limeted sources of conventional enery like fuel. This all energy sources have a lot of problem because it has a limited number of energy. It is important to make a model and analysis based on the availability of the energy sources. Solar energy is the most prefered renewable energy in equator countries today. It depends on the production of solar energy in certain area to have a good design and analysis of  the solar energy. To have a good analysis of it, in this paper we make a prediction model of solar energy based on the data of solar irradiation. We make the solar and wind enery model by using Autoregresif Integrated Moving Average (ARIMA) Method. This model is implemented by R Studio that is a powerfull of statistical. As the final result, we got the statistical model of solar comparing with the actual data


2017 ◽  
Vol 68 (2) ◽  
pp. 317-322
Author(s):  
Anca Mihaela Mocanu ◽  
Constantin Luca ◽  
Alina Costina Luca

The purpose of this research is to synthetize, characterize and thermal degradation of new heterolytic derivates with potential biological properties. The derivates synthesis was done by obtaining new molecules with pyralozone structure which combine two pharmacophore entities: the amidosulfonyl-R1,R2 phenoxyacetil with the 3,5-dimethyl pyrazole which can have potential biological properties. The synthesis stages of the new products are presented as well as the elemental analysis data and IR, 1H-NMR spectral measurements made for elucidating the chemical structures and thermostability study which makes evident the temperature range proper for their use and storage. The obtained results were indicative of a good correlation of the structure with the thermal stability as estimated by means of the initial degradation temperatures as well as with the degradation mechanism by means of the TG-FTIR analysis.


Sign in / Sign up

Export Citation Format

Share Document