Konsumsi Energi Pada Alat Pengering Surya dan Tipe Bak Untuk Pengeringan Biji Kakao

2019 ◽  
Vol 17 (3) ◽  
Author(s):  
Lamhot P. Manalu
Keyword(s):  
Specific Energy ◽  
Fossil Fuels ◽  
Negative Impact ◽  
Solar Irradiation ◽  
Drying Process ◽  
Food Industries ◽  
Solar Dryer ◽  
Agricultural Applications ◽  
Drying System ◽  
Drying Efficiency

Crop drying is essential for preservation in agricultural applications. It is performed either using fossil fuels in an artificial mechanical drying process or by placing the crop under the open sun. The first method is costly and has a negative impact on the environment, while the second method is totally dependent on the weather. The drying process requires a lot of energy in relation to the amount of water that must be evaporated from the product. It is estimated that 12% of the total energy used by the food industries and agriculture absorbed in this process. Due to the limitation of energy resources, it is important to keep researching and developing of diversification and optimization of energy This study aims to assess the use of energy for cocoa drying using solar energy dryer and bin-type dryer, as well as to determine the drying efficiency of each type of dryer. The results showed that the efficiency of the solar dryer drying system ranges between 36% to 46%, while the tub-type dryers between 21.7% to 33.1%. The specific energy of solar dryer ranged from 6.17-7.87 MJ / kg, while the tub-type dryers 8.58-13.63 MJ / kg. Dryer efficiency is influenced by the level of solar irradiation and the amount of drying load, the higher the irradiation received and more cocoa beans are dried, the drying efficiency is also higher and the specific energy further down.Proses pengeringan memerlukan banyak energi sehubungan dengan banyaknya air yang harus diuapkan dari bahan yang dikeringkan. Pengeringan dapat dilakukan dengan menggunakan pengering mekanis berbahan bakar fosil atau dengan menempatkan produk di bawah matahari terbuka. Metode pertama adalah mahal dan memiliki dampak negatif pada lingkungan, sedangkan metode kedua sangat tergantung pada cuaca. Diperkirakan bahwa 12% dari total energi yang dipergunakan oleh industri pangan dan pertanian diserap untuk proses ini. Mengingat semakin terbatasnya sumber energi bahan bakar minyak maka usaha diversifikasi dan optimasi energi untuk pengeringan perlu terus diteliti dan dikembangkan. Salah satunya adalah pemanfaatan energi surya sebagai sumber energi terbarukan. Penelitian ini bertujuan untuk mengkaji penggunaan energi untuk pengeringan kakao dengan memakai pengering energi surya dan pengering tipe bak, serta untuk mengetahui efisiensi pengeringan dari masing-masing tipe pengering. Hasil kajian menunjukkan bahwa efisiensi total sistem pengeringan alat pengering surya berkisar antara 36% dan 46%, sedangkan pengering tipe bak antara 21.7% dan 33.1%. Kebutuhan energi spesifik alat pengering surya berkisar antara 6.17-7.87 MJ/kg, sedangkan alat pengering tipe bak 8.58-13.63 MJ/kg. Efisiensi alat pengering dipengaruhi oleh tingkat iradiasi surya dan jumlah beban pengeringan, semakin tinggi iradiasi yang diterima pengering serta semakin banyak biji kakao yang dikeringkan, maka efisiensi pengeringan juga semakin tinggi dan kebutuhan energi spesifik semakin turun.Keywords: energy, efficiency, cocoa, solar dryer, bin-type dryer.

scholarly journals An active indirect solar system for food products drying

2019 ◽  
Vol 12 (1) ◽  
pp. 142-149 ◽  
Author(s):  
Abdul Wasim Noori ◽  
Mohammad Jafar Royen ◽  
Juma Haydary
Keyword(s):  
Ambient Temperature ◽  
Air Temperature ◽  
Food Products ◽  
Sample Thickness ◽  
Drying Process ◽  
Rectangular Section ◽  
Drying Time ◽  
Solar Dryer ◽  
Temperature And Humidity ◽  
Drying System

AbstractAn energy independent active indirect solar drying system for the study of food products drying at specific climate conditions was developed and tested. As a model material, sliced tomato was selected because of its short shelf live, high humidity and potential to be a high value dried product. Indirect solar dryer enabled complete protection of the dried material against sunlight, birds, insects, rain and dust during the drying process. The solar dryer system design includes a rectangular section (1000 × 600 × 400) mm chamber and a flat solar collector (1500 × 600 × 100) mm with the surface area of 0.9 m2. Air flow was induced by a fan installed at the inlet of the collector and powered by a photovoltaic solar panel and a battery system. Temperature and humidity of air were monitored at the collector inlet, collector outlet and the drying chamber outlet. The key element of the collector is a 10.5 m long rectangular section aluminum pipe (55 × 35) mm coated with an absorption layer. The maximum dryer capacity is around 3 kg of wet material (sliced tomato) per batch. Average air temperature increase in the collector was measured to be 30 °C during the winter season. Air relative humidity decreased from 21 % to 15 % after passing through the collector. The moisture of tomato slices decreased from the initial value of 92 % down to 22 % during the time of the experiment (30 h). Quality of tomatoes dried using the designed solar dryer differed significantly in color as well as in texture from those dried by the commonly used methods, like an open sun drying system. Equilibrium moisture content of the product was reached after 30 h in December when the maximum outside temperature was 17.6 °C. The tomato mass decreased from 333 g to 33.15 g; the mass loss being approximately 90 %. The heated air temperature and humidity at the dryer inlet and outlet were influenced by the change of the ambient temperature and humidity during the day. Variation of the drying rate with the change of the ambient temperature and humidity was observed. During summer, when the sun radiation increases, the drying time for sliced tomato with 9 mm thickness decreased from 25 h to 15 h. The sample thickness also has an impact on the drying process. When the sample thickness increased from 9 mm to 12 mm, the drying time increased from 15 h to 20 h of active device time.

scholarly journals Experimental Analysis of Single Glazing, Double Glazing and Triple Pass Solar Dryer

2020 ◽  
pp. 70-73
Keyword(s):  
Moisture Content ◽  
Window Glass ◽  
Initial Moisture Content ◽  
Solar Drying ◽  
Average Value ◽  
Solar Dryer ◽  
Collector Efficiency ◽  
Drying System ◽  
Time Required ◽  
Drying Efficiency

Adjustable Multi glazing solar drying system is designed and fabricated for experimental study. The arrangement is made in the present model such that it can be wok as a single glazing, double glazing and multi-glazing solar dryer by adjusting the plain window glass (Glazing). The performance analysis and comparison of Single glazing (SGSD), double glazing (DGSD) and Triple pass solar drying system (TPSD) have been conducted by using red chilli. The performance curves show the effect of solar intensity on the collector efficiency, drying efficiency and pick-up efficiency of solar drying system. The collector efficiency of TPSD increased by 28.8% and 53% as compared to DGSD & SGSD respectively at average value of solar radiation 674.4 W/m² at 26.90 gm per second of air mass. The initial moisture content in red chili was measured and found 78.8 (wb) reduced to minimum moisture content 9.8% (wb). It could be concluded that, the time required to dry the red chilli in TPSD is minimum as compared to SGSD and DGSD.

scholarly journals Uji kinerja Alat Pengering Ikan Tipe Green-House Effect (GHE) Vent Dryer

2020 ◽  
Vol 13 (2) ◽  
pp. 84-93
Author(s):  
Muhammad Yasar ◽  
Raida Agustina ◽  
Mustaqimah Mustaqimah ◽  
Diswandi Nurba
Keyword(s):  
Relative Humidity ◽  
Solar Irradiation ◽  
Business Sector ◽  
Drying Process ◽  
Air Velocity ◽  
Fresh Fish ◽  
Green House ◽  
Solar Dryer ◽  
Air Circulation ◽  
Drying Chamber

Abstrak. Diantara permasalahan yang dihadapi oleh sektor usaha perikanan ialah  belum efisiennya teknis pengelolaan  dan tidak stabilnya kontinuitas produksi. Hal ini disebabkan oleh kurangnya sarana prasarana untuk mengolah ikan serta sistem pemasaran ikan segar yang masih konvensional, sehingga cepat membusuk apabila tidak diolah lebih lanjut. Penanganan dan pengolahan yang cepat dan tepat diperlukan untuk mengurangi resiko pembusukan dan dapat meningkatkan nilai jual hingga sampai kepada konsumen. Salah satu teknologi untuk meningkatkan masa simpan ikan ialah dengan cara proses pengeringan. Sebuah alat pengering ikan Green-House Effect (GHE) telah dikembangkan. Pengujian dan analisis alat pengering untuk ikan tersebut disajikan dalam makalah ini. Pengering surya ini menambahkan ventilator berupa exhaust fan guna memaksimalkan proses sirkulasi udara di dalam ruang pengeringan. Parameter yang diukur dalam pengujian ini adalah distribusi suhu, kelembaban relatif, iradiasi dan pengukuran kecepatan udara. Hasil penelitian menunjukan bahwa temperatur di dalam ruang pengering terlihat lebih tinggi yaitu 67°C dibandingkan dengan temperatur di lingkungan karena sifat absorber yang mampu menyerap panas. Sementara itu kelembaban relatif di dalam ruang pengering lebih rendah jika dibandingkan dengan kelembaban di lingkungan yaitu sebesar 30,1%. Nilai iradiasi surya yang diperoleh sangat berfluktuasi dengan nilai tertinggi adalah sebesar 180,6 W/m2. Kecepatan udara di dalam ruang pengering surya lebih stabil dibandingkan dengan kecepatan udara lingkungan karena adanya penambahan ventilator berupa exhaust fan. Hal inilah yang menyebabkan proses pengeringan menjadi lebih cepat.Performance of Green House Effect (GHE) Vent Dryer for Fish DryingAbstract. The problems that occur in the fishery business sector are inefficient and unstable continuity of production. The reasons for this include the lack of infrastructure for processing fish and also the very limited marketing of fresh fish due to its fast-rotting nature if not further processed. Fast and precise handling and processing are needed to reduce the risk of spoilage. One of the technologies to increase the shelf life of fish is the drying process. A greenhouse effect vent dryer type fish dryer has been developed. The testing and analysis of the dryer for these fish are presented in this paper. This solar dryer adds a ventilator in the form of an exhaust fan to maximize air circulation in the drying chamber. The parameters measured in this test are temperature distribution, relative humidity distribution, solar irradiation, and air velocity measurement. The results show that the temperature in the drying chamber is 67 ⸰C higher than the temperature in the environment due to the nature of the absorber which can absorb heat. Meanwhile, the relative humidity in the drying chamber was lower than the humidity in the environment, which was 30.1%. The value of solar irradiation obtained fluctuates where the highest irradiation is 180.6 W / m2. The air velocity in the solar dryer is more stable than the ambient airspeed due to the addition of a ventilator in the form of an exhaust fan. This causes the drying process to take place faster.

CATFISH DRYING (Clarias Batraclus) USING ‘TEKO BERSAYAP’ SOLAR DRYER

2012 ◽  
Vol 2 (1) ◽  
pp. 14-20
Author(s):  
Yuwana Yuwana
Keyword(s):  
Relative Humidity ◽  
Moisture Content ◽  
Ambient Temperature ◽  
Drying Rate ◽  
Drying Process ◽  
Drying Time ◽  
Ambient Relative Humidity ◽  
Solar Dryer

Experiment on catfish drying employing ‘Teko Bersayap’ solar dryer was conducted. The result of the experiment indicated that the dryer was able to increase ambient temperature up to 44% and decrease ambient relative humidity up to 103%. Fish drying process followed equations : KAu = 74,94 e-0,03t for unsplitted fish and KAb = 79,25 e-0,09t for splitted fish, where KAu = moisture content of unsplitted fish (%), KAb = moisture content of splitted fish (%), t = drying time. Drying of unsplitted fish finished in 43.995 hours while drying of split fish completed in 15.29 hours. Splitting the fish increased 2,877 times drying rate.

Energy Markets and Trading

2018 ◽  
Author(s):  
David Mares
Keyword(s):  
Fossil Fuels ◽  
Negative Impact ◽  
Adjustment Costs ◽  
Institutional Context ◽  
Energy Markets ◽  
Energy Resources ◽  
Trade Offs ◽  
The Social ◽  
Impact Risk

This chapter discusses the role of energy in economic development, the transformation of energy markets, trade in energy resources themselves, and the geopolitical dynamics that result. The transformation of energy markets and their expansion via trade can help or hinder development, depending on the processes behind them and how stakeholders interact. The availability of renewable, climate-friendly sources of energy, domestically and internationally, means that there is no inherent trade-off between economic growth and the use of fossil fuels. The existence of economic, political, social, and geopolitical adjustment costs means that the expansion of international energy markets to incorporate alternatives to oil and coal is a complex balance of environmental trade-offs with no solutions completely free of negative impact risk. An understanding of the supply of and demand for energy must incorporate the institutional context within which they occur, as well as the social and political dynamics of their setting.

scholarly journals Experimental and Numerical Investigations on Conductive Drying of Phosphate Washing Waste Clay

Minerals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 482
Author(s):  
Fatiha Berroug ◽  
Yassir Bellaziz ◽  
Naaila Ouazzani ◽  
Fatima Ait Nouh ◽  
Abdessamad Hejjaj ◽  
...  
Keyword(s):  
Scale Up ◽  
Free Water ◽  
Moisture Diffusivity ◽  
Sample Thickness ◽  
Total Production ◽  
Drying Process ◽  
One Dimensional ◽  
Numerical Investigations ◽  
The World ◽  
Drying System

Morocco is the leading producer of phosphate and its derivatives in the world with a total production of 35 Mt. However, the extraction and the valorization of this mine generate huge quantities of phosphate washing waste clay (PHWWC) that constitute a main environmental and economic concern. To facilitate this waste clay storage and handling, it is necessary to decrease its moisture content that represents 80% of PHWWC. The present paper is devoted to studying the conductive drying of PHWWC. Drying experiments were conducted in a laboratory pilot. Afterwards, the experiment results were implemented in a one-dimensional numerical model of heat and mass transfer in a porous media to identify the drying parameters and performances. It was found that most of the water contained in PHWWC is free water that is removed with a constant drying rate. The volume reduction with a marked cracks phenomenon attained 65% without any significant effect of drying temperature and sample thickness. The effective moisture diffusivity of the PHWWC for a conductive drying process is ranged between 10−9 and 1.1 × 10−8 m2·s−1. The thermal efficiency of the drying system is up to 86%. The results could be used for the purpose of design and scale-up of the industrial dryer based on laboratory-scale experiments.

scholarly journals Study on the Variable-Temperature Drying Process of Corn Drying in an Industrial Corn-Drying System Equipped with a Self-Adaptive Control Heat Exchanger

2021 ◽  
Vol 11 (6) ◽  
pp. 2772
Author(s):  
Bin Li ◽  
Zhiheng Zeng ◽  
Xuefeng Zhang ◽  
Ye Zhang
Keyword(s):  
Adaptive Control ◽  
Energy Consumption ◽  
Heat Loss ◽  
Thermal Performance ◽  
Variable Temperature ◽  
The Other ◽  
Drying Process ◽  
Drying Kinetic ◽  
Drying System ◽  
Self Adaptive

To realize energy-saving and efficient industrial grain drying, the present work studied the variable-temperature drying process of corn drying in a novel industrial corn-drying system with a heat recycling and self-adaptive control function. The drying kinetics, thermal performance, heat-loss characteristics and the heat-recycling performance of the drying system under different allocations between flue gas and hot air were investigated, and the optimized drying process was proposed and compared with two constant drying processes. The results showed that the optimized drying process exhibited better drying kinetic and thermal performance than the two constant drying processes. More specifically, the total heat loss, total energy consumption and specific energy consumption of the optimized drying process were ascertained to be 36,132.85 MJ, 48,803.99 MJ and 7290.27 kJ/kg, respectively, which were lower than those of the other two processes. On the other hand, the thermal efficiency of the drying chamber for the optimized drying process was ascertained to be varied within the range of 6.81–41.71%. Overall, the validation results showed that the optimized drying process can significantly improve the drying performance of the drying system.

scholarly journals Analysis of the Particulate Matter Pollution in the Urban Areas of Croatia, EU

2020 ◽  
Vol 4 (1) ◽  
pp. 9
Author(s):  
Martina Habulan ◽  
Bojan Đurin ◽  
Anita Ptiček Siročić ◽  
Nikola Sakač
Keyword(s):  
Particulate Matter ◽  
Urban Areas ◽  
Fossil Fuels ◽  
Negative Impact ◽  
Electric Energy ◽  
Two Cities ◽  
Adriatic Coast ◽  
Pm2.5 And Pm10 ◽  
Autumn And Winter ◽  
Particulate Matter Pollution

Particulate matter (PM) comprises a mixture of chemical compounds and water particles found in the air. The size of suspended particles is directly related to the negative impact on human health and the environment. In this paper, we present an analysis of the PM pollution in urban areas of Croatia. Data on PM10 and PM2.5 concentrations were measured with nine instruments at seven stationary measuring units located in three continental cities, namely Zagreb (the capital), Slavonski Brod, and Osijek, and two cities on the Adriatic coast, namely Rijeka and Dubrovnik. We analyzed an hourly course of PM2.5 and PM10 concentrations and average seasonal PM2.5 and PM10 concentrations from 2017 to 2019. At most measuring stations, maximum concentrations were recorded during autumn and winter, which can be explained by the intensive use of fossil fuels and traffic. Increases in PM concentrations during the summer months at measuring stations in Rijeka and Dubrovnik may be associated with the intensive arrival of tourists by air during the tourist season, and lower PM concentrations during the winter periods may be caused by a milder climate consequently resulting in lower consumption of fossil fuels and use of electric energy for heating.

scholarly journals Use of diesel and emulsified diesel in CI engine: A comparative analysis of engine characteristics

2021 ◽  
Vol 104 (2) ◽  
pp. 003685042110209
Author(s):  
Zain Ul Hassan ◽  
Muhammad Usman ◽  
Muhammad Asim ◽  
Ali Hussain Kazim ◽  
Muhammad Farooq ◽  
...  
Keyword(s):  
Comparative Analysis ◽  
Alternative Fuels ◽  
Fossil Fuels ◽  
Negative Impact ◽  
Water Injection ◽  
Load Range ◽  
Performance And Emission ◽  
Injection Methods ◽  
Ci Engine ◽  
Ci Engines

Despite a number of efforts to evaluate the utility of water-diesel emulsions (WED) in CI engine to improve its performance and reduce its emissions in search of alternative fuels to combat the higher prices and depleting resources of fossil fuels, no consistent results are available. Additionally, the noise emissions in the case of WED are not thoroughly discussed which motivated this research to analyze the performance and emission characteristics of WED. Brake thermal efficiency (BTE) and brake specific fuel consumption (BSFC) were calculated at 1600 rpm within 15%–75% of the load range. Similarly, the contents of NOx, CO, and HC, and level of noise and smoke were measured varying the percentage of water from 2% to 10% gradually for all values of loads. BTE in the case of water emulsified diesel was decreased gradually as the percentage of water increased accompanied by a gradual increase in BSFC. Thus, WED10 showed a maximum 13.08% lower value of BTE while BSFC was increased by 32.28%. However, NOx emissions (21.8%) and smoke (48%) were also reduced significantly in the case of WED10 along with an increase in the emissions of HC and CO and noise. The comparative analysis showed that the emulsified diesel can significantly reduce the emission of NOx and smoke, but it has a negative impact on the performance characteristics and HC, CO, and noise emissions which can be mitigated by trying more fuels variations such as biodiesel and using different water injection methods to decrease dependency on fossil fuels and improve the environmental impacts of CI engines.

Sign in / Sign up

Export Citation Format

Share Document