Design of Compact Coupled-Line Complex Impedance Transformers With the Series Susceptance Component

2020 ◽  
Vol 67 (11) ◽  
pp. 2482-2486
Author(s):  
Shaojun Fang ◽  
Xiao Jia ◽  
Hongmei Liu ◽  
Zhongbao Wang
Author(s):  
Kittipong Nithiporndecha ◽  
Chatrpol Pakasiri

Background: A compact complex impedance-transforming balun for UHF frequencies, which is based on a coupled-line structure that matched all ports and provided high output port isolation, was designed in this paper. Methods: A lumped component transformation was used to minimize circuit size. The implemented circuit operated at 433 MHz with the reflection coefficients less than -16 dB at all ports, 0.22 dB amplitude balance and 180° phase balance at the output ports. The signal coupling between the output ports was -16.8 dB. The circuit size is small at 0.032λ. Results: Complex impedance-transforming baluns were designed to operate at 433 MHz. The source impedance at port 1 was set at Zs = 12 - j12Ω and the load impedances at port 2 and 3 were set at ZL = 80 + j30Ω. Conclusion: A compact complex impedance-transforming balun at UHF frequency, with all ports matched and high isolations, was designed and illustrated in this paper.


2014 ◽  
Vol 48 ◽  
pp. 123-128 ◽  
Author(s):  
Weiwei Zhang ◽  
Yuanan Liu ◽  
Yongle Wu ◽  
Weimin Wang ◽  
Ming Su ◽  
...  

2020 ◽  
Vol 92 (1) ◽  
pp. 10901
Author(s):  
Saloua El Asri ◽  
Hamid Ahamdane ◽  
Lahoucine Hajji ◽  
Mohamed El Hadri ◽  
Moulay Ahmed El Idrissi Raghni ◽  
...  

Forsterite single phase powder Mg2SiO4 was synthesized by sol–gel method alongside with heat treatment, using two different cation alkaline salts MCl as mineralizers (M = Na, K) with various mass percentages (2.5, 5, 7.5, and 10 wt.%). In this work, we report on the effect of the cation type and the added amount of used mineralizer on microstructure and electrical conductivity of Mg2SiO4. The formation of forsterite started at 680–740  °C and at 630–700  °C with KCl and NaCl respectively, as shown by TG-DTA and confirmed by XRD. Furthermore, the Fourier transform infrared (FTIR) transmission spectra indicated bands corresponding to vibrations of forsterite structure. The morphology and elemental composition of sintered ceramics were examined by SEM-EDX analyses, while their densities, which were measured by Archimedes method, increased with addition of both alkaline salts. The electrical measurements were performed by Complex Impedance Spectroscopy. The results showed that electrical conductivity increased with the addition of both mineralizers, which was higher for samples prepared with NaCl than those prepared with KCl.


PIERS Online ◽  
2007 ◽  
Vol 3 (6) ◽  
pp. 948-950 ◽  
Author(s):  
Maria del Castillo Velazquez-Ahum ◽  
Jesus Martel-Villagr ◽  
Francisco Medina
Keyword(s):  

1988 ◽  
Vol 59 (1) ◽  
pp. 77-89 ◽  
Author(s):  
E. Puil ◽  
B. Gimbarzevsky ◽  
I. Spigelman

1. The complex impedances and impedance magnitude functions were obtained from neurons in in vitro slices of trigeminal root ganglia using frequency-domain analyses of intracellularly recorded voltage responses to specified oscillatory input currents. A neuronal model derived from linearized Hodgkin-Huxley-like equations was used to fit the complex impedance data. This procedure yielded estimates for membrane electrical properties. 2. Membrane resonance was observed in the impedance magnitude functions of all investigated neurons at their initial resting membrane potentials and was similar to that reported previously for trigeminal root ganglion neurons in vivo. Tetrodotoxin (10(-6) M), a Na+-channel blocker, applied in the bathing medium for 20 min produced only minor changes, if any, in the resonance, although gross impairment of Na+-spike electrogenesis was apparent in most of the neurons. Brief applications (1-5 min) of a K+-channel blocker, tetraethylammonium (TEA; 10(-2) M), increased the impedance magnitude and abolished, in a reversible manner, the resonant behavior. In all cases, the resonant frequency was decreased by TEA administration prior to total blockade of resonance. 3. The TEA-induced blockade of resonance was associated with decreases in the estimates of the membrane conductances, without significant alterations of input capacitance. A particularly large decrease was observed in Gr, the time-invariant resting conductance that includes a lumped leak conductance component. The voltage- and time-dependent conductance, GL, and associated relaxation time constant, tau u, also declined progressively during administration of TEA. 4. Systematic variations in the membrane potentials of trigeminal root ganglion neurons were produced by intracellular injections of long-lasting step currents with superposition of the oscillatory current stimuli, in order to assess the effects of TEA on the relationship of the electrical properties to the membrane potential. Applications of TEA led to a depolarizing shift in the dependence of the membrane property estimates, suggesting voltage-dependence of the effects of TEA on presumed K+ channels in the membrane. 5. These data suggest a primary involvement of K+ conductance in the genesis of membrane resonance. This electrical behavior or its ionic mechanism is a major modulator of the subthreshold electrical responsiveness of trigeminal root ganglion neurons.


Author(s):  
E. Faghand ◽  
S. Karimian ◽  
E. Mehrshahi ◽  
N. Karimian

Abstract A new simple computational tool is proposed for the synthesis of multi-section coupled-line filters based on combined modified planar circuit method (MPCM) and transmission line method (TLM) analysis, referred to as MPCM-TLM. Due to its fundamentally simple architecture, the presented tool offers significantly faster optimization of coupled-line filters – for exactly the same initial simulation set-up – than other costly commercially-available tools, giving equally reliable results. Validity and accuracy of the proposed tool have been verified through the design of 3rd, 5th, and 7th order coupled-line filters and comparative analysis between results obtained from the proposed approach and the high-frequency structure simulator. A remarkable 99% time reduction in the analysis is recorded in the case of 7th order filter using the proposed tool, for almost identical results to HFSS. Therefore, it can be confidently claimed that the proposed technique can be used as a reliable alternative to existing complex, costly, processor-intensive CAD tools.


2021 ◽  
Vol 11 (6) ◽  
pp. 2788
Author(s):  
Petr Polovodov ◽  
Didier Théron ◽  
Clément Lenoir ◽  
Dominique Deresmes ◽  
Sophie Eliet ◽  
...  

The main objectives of this work are the development of fundamental extensions to existing scanning microwave microscopy (SMM) technology to achieve quantitative complex impedance measurements at the nanoscale. We developed a SMM operating up to 67 GHz inside a scanning electron microscope, providing unique advantages to tackle issues commonly found in open-air SMMs. Operating in the millimeter-wave frequency range induces high collimation of the evanescent electrical fields in the vicinity of the probe apex, resulting in high spatial resolution and enhanced sensitivity. Operating in a vacuum allows for eliminating the water meniscus on the tip apex, which remains a critical issue to address modeling and quantitative analysis at the nanoscale. In addition, a microstrip probing structure was developed to ensure a transverse electromagnetic mode as close as possible to the tip apex, drastically reducing radiation effects and parasitic apex-to-ground capacitances with available SMM probes. As a demonstration, we describe a standard operating procedure for instrumentation configuration, measurements and data analysis. Measurement performance is exemplarily shown on a staircase microcapacitor sample at 30 GHz.


Sign in / Sign up

Export Citation Format

Share Document