Temperature and mass scaling affect cutaneous and pulmonary respiratory performance in a diving frog

2021 ◽  
Author(s):  
Ryan B. MCWHINNIE ◽  
Jason P. SCKRABULIS ◽  
Thomas R. RAFFEL
Keyword(s):  
Author(s):  
Benjamin L. Davis ◽  
Alister W. Graham

Abstract Recent X-ray observations by Jiang et al. have identified an active galactic nucleus (AGN) in the bulgeless spiral galaxy NGC 3319, located just $14.3\pm 1.1$ Mpc away, and suggest the presence of an intermediate-mass black hole (IMBH; $10^2\leq M_\bullet/\textrm{M}_{\odot}\leq 10^5$ ) if the Eddington ratios are as high as 3 to $3\times10^{-3}$ . In an effort to refine the black hole mass for this (currently) rare class of object, we have explored multiple black hole mass scaling relations, such as those involving the (not previously used) velocity dispersion, logarithmic spiral arm pitch angle, total galaxy stellar mass, nuclear star cluster mass, rotational velocity, and colour of NGC 3319, to obtain 10 mass estimates, of differing accuracy. We have calculated a mass of $3.14_{-2.20}^{+7.02}\times10^4\,\textrm{M}_\odot$ , with a confidence of 84% that it is $\leq $ $10^5\,\textrm{M}_\odot$ , based on the combined probability density function from seven of these individual estimates. Our conservative approach excluded two black hole mass estimates (via the nuclear star cluster mass and the fundamental plane of black hole activity—which only applies to black holes with low accretion rates) that were upper limits of ${\sim}10^5\,{\textrm M}_{\odot}$ , and it did not use the $M_\bullet$ – $L_{\textrm 2-10\,\textrm{keV}}$ relation’s prediction of $\sim$ $10^5\,{\textrm M}_{\odot}$ . This target provides an exceptional opportunity to study an IMBH in AGN mode and advance our demographic knowledge of black holes. Furthermore, we introduce our novel method of meta-analysis as a beneficial technique for identifying new IMBH candidates by quantifying the probability that a galaxy possesses an IMBH.


1991 ◽  
Vol 147 ◽  
pp. 407-408
Author(s):  
R. C. Fleck

The observed flattening of the initial stellar mass function at low mass can be accounted for in terms of the different interstellar cloud size-mass scaling and different ambipolar diffusion time scaling for small, thermally-supported clouds and larger clouds supported primarily by turbulent pressure.


Author(s):  
R. M. T. Connors ◽  
S. Markoff ◽  
M. A. Nowak ◽  
J. Neilsen ◽  
C. Ceccobello ◽  
...  

2014 ◽  
Vol 18 (suppl.1) ◽  
pp. 139-148
Author(s):  
Tarek Aburuga ◽  
Aleksandar Sedmak ◽  
Zoran Radakovic

The effect of the residual stresses and strains is one of the most important parameter in the structure integrity assessment. A finite element model is constructed in order to simulate the multi passes mismatched submerged arc welding SAW which used in the welded tensile test specimen. Sequentially coupled thermal mechanical analysis is done by using ABAQUS software for calculating the residual stresses and distortion due to welding. In this work, three main issues were studied in order to reduce the time consuming during welding simulation which is the major problem in the computational welding mechanics (CWM). The first issue is dimensionality of the problem. Both two- and three-dimensional models are constructed for the same analysis type, shell element for two dimension simulation shows good performance comparing with brick element. The conventional method to calculate residual stress is by using implicit scheme that because of the welding and cooling time is relatively high. In this work, the author shows that it could use the explicit scheme with the mass scaling technique, and time consuming during the analysis will be reduced very efficiently. By using this new technique, it will be possible to simulate relatively large three dimensional structures.


Author(s):  
Timo Saksala ◽  
Reijo Kouhia ◽  
Ahmad Mardoukhi ◽  
Mikko Hokka

This paper presents a numerical study on thermal jet drilling of granite rock that is based on a thermal spallation phenomenon. For this end, a numerical method based on finite elements and a damage–viscoplasticity model are developed for solving the underlying coupled thermo-mechanical problem. An explicit time-stepping scheme is applied in solving the global problem, which in the present case is amenable to extreme mass scaling. Rock heterogeneity is accounted for as random clusters of finite elements representing rock constituent minerals. The numerical approach is validated based on experiments on thermal shock weakening effect of granite in a dynamic Brazilian disc test. The validated model is applied in three-dimensional simulations of thermal jet drilling with a short duration (0.2 s) and high intensity (approx. 3 MW m −2 ) thermal flux. The present numerical approach predicts the spalling as highly (tensile) damaged rock. Finally, it was shown that thermal drilling exploiting heating-forced cooling cycles is a viable method when drilling in hot rock mass. This article is part of the theme issue ‘Fracture dynamics of solid materials: from particles to the globe’.


2018 ◽  
Vol 869 (2) ◽  
pp. 113 ◽  
Author(s):  
Benjamin L. Davis ◽  
Alister W. Graham ◽  
Ewan Cameron

1996 ◽  
Vol 77 (5) ◽  
pp. 822-825 ◽  
Author(s):  
L. Phair ◽  
L. G. Moretto ◽  
G. J. Wozniak ◽  
R. T. de Souza ◽  
D. R. Bowman ◽  
...  

2021 ◽  
Author(s):  
Monica Daniela IORDACHE ◽  
Claudiu BADULESCU ◽  
Malick DIAKHATE ◽  
Adrian CONSTANTIN ◽  
Eduard Laurentiu NITU ◽  
...  

Abstract Determining the optimal parameters of the Friction Stir Welding (FSW) process, which are suitable for a given joint configuration, remains a great challenge and is often achieved through extremely time-consuming and costly experimental investigations. The present paper aims to propose a strategy for the identification of the optimal parameters for a butt-welded joint of 3-mm thick quasi-pure copper plates. This strategy is based on FEM (finite elements method) simulations and the optimal temperature that is supposedly known. A robust and efficient finite element model that is based on the Coupled Eulerian-Lagrangian (CEL) approach has been adopted and a temperature-dependent friction coefficient has been used. Besides, the mass scaling technique has been used to significantly reduce the simulation time. The thermo-mechanical behavior of the butt-welded joint was modeled using a Johnson-Cook plasticity model that was identified through lab tests at different temperatures. The results of the parametric study help to define the numerical surface response, and based on this latter one can found the optimal parameters, advancing (υa) and rotational (υr) speeds, of the FSW process. This numerical surface response has been validated with good agreement between the numerical prediction of the model and the experimental results. Furthermore, experimental investigations involving x-ray radiography, digital image correlation method, and fracture surface analysis have helped a better understanding of the effects of FSW parameters on the welded joint quality.


2008 ◽  
Vol 681 (2) ◽  
pp. 905-924 ◽  
Author(s):  
Sera Markoff ◽  
Michael Nowak ◽  
Andrew Young ◽  
Herman L. Marshall ◽  
Claude R. Canizares ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document