Wetting of Ceramic Oxides by Molten Metals Under Ultrahigh Vacuum

1970 ◽  
Vol 53 (2) ◽  
pp. 87-90 ◽  
Author(s):  
F. L. HARDING ◽  
D. R. ROSSINGTON
Author(s):  
V. K. Bazylev ◽  
◽  
A. M. Zhidkov ◽  
V. A. Korotchenko ◽  
V. E. Skvortsov ◽  
...  
Keyword(s):  

2001 ◽  
Vol 7 (S2) ◽  
pp. 920-921
Author(s):  
Yukihito Kondo ◽  
Kimiharu Okamoto ◽  
Mikio Naruse ◽  
Toshikazu Honda ◽  
Mike Kersker

Ultrahigh-vacuum transmission electron microscopy (UHVTEM) has become increasingly popular for the direct observation of nanostructures having clean surfaces, since industrial requirements to make and research nano-scale materials have been rapidly growing for quantum or nanoscale electronic devices. Since we have first developed high resolution UHVTEM in 1986, the UHVTEMs have been evolved with steady advances such as UHV compatible goniometer, field emission gun or etc. Furthermore, the UHVTEM started to combine analytical capabilities such as energy dispersive X-ray spectrometer, in-column type energy filter and etc., and to combine STM (scanning tunneling microscope). The UHV technology is essential for the analysis, because the portion of contaminant in a nano-scale specimen increases as the size of the specimen goes down. This paper reports the results of gold nanostructures by recently the developed UHVTEM.Figure 1 shows recently developed UHVTEM with Schottky type field emission gun.


2015 ◽  
Vol 772 ◽  
pp. 250-256 ◽  
Author(s):  
Hideto Harada ◽  
Shin Ichi Nishida ◽  
Mayumi Suzuki ◽  
Hisaki Watari ◽  
T. Haga

This paper describes direct cladding of magnesium (Mg) and aluminum (Al) alloys using a tandem horizontal twin roll caster that has three pairs of upper and lower rolls. Manufacturing conditions that are appropriate for fabricating Al/Mg and Al/Mg/Al cladded material were investigated. The surface condition of the cladded cast strip was examined. An electron probe micro analyzer was used to observe the interface between Al alloy and Mg alloy. The thickness of the mixed layer of Al and Mg alloy was 15μm, and how the materials were connected was clarified. Microscopic observation and backscattered electron analysis were used to investigate the cladding mechanisms of the Al and Mg alloy layers. Average hardness was determined using the Vickers hardness test at the Al layer and at the diffused layer between Mg and Al alloys. Cladding of Al/Mg alloy and A/Mg/Al alloy was possible using a tandem twin-roll caster. In addition, Al3Mg2 and Al12Mg17 phase precipitation at the interface of the Al and Mg alloys was confirmed during direct cladding from molten metals.


Sign in / Sign up

Export Citation Format

Share Document