Ultrahigh-Vacuum Electron Microscopy for Gold Nanostructures

2001 ◽  
Vol 7 (S2) ◽  
pp. 920-921
Author(s):  
Yukihito Kondo ◽  
Kimiharu Okamoto ◽  
Mikio Naruse ◽  
Toshikazu Honda ◽  
Mike Kersker

Ultrahigh-vacuum transmission electron microscopy (UHVTEM) has become increasingly popular for the direct observation of nanostructures having clean surfaces, since industrial requirements to make and research nano-scale materials have been rapidly growing for quantum or nanoscale electronic devices. Since we have first developed high resolution UHVTEM in 1986, the UHVTEMs have been evolved with steady advances such as UHV compatible goniometer, field emission gun or etc. Furthermore, the UHVTEM started to combine analytical capabilities such as energy dispersive X-ray spectrometer, in-column type energy filter and etc., and to combine STM (scanning tunneling microscope). The UHV technology is essential for the analysis, because the portion of contaminant in a nano-scale specimen increases as the size of the specimen goes down. This paper reports the results of gold nanostructures by recently the developed UHVTEM.Figure 1 shows recently developed UHVTEM with Schottky type field emission gun.

2019 ◽  
Vol 25 (6) ◽  
pp. 1466-1470 ◽  
Author(s):  
Rituparna Chatterjee ◽  
Subhajit Saha ◽  
Karamjyoti Panigrahi ◽  
Uttam Kumar Ghorai ◽  
Gopes Chandra Das ◽  
...  

AbstractIn this work, strongly blue emitting Ce3+-activated BaAl2O4 nanophosphors were successfully synthesized by a sol–gel technique. The crystal structure, morphology, and microstructure of the nanophosphors have been studied by X-ray powder diffraction, field emission scanning electron microscopy, and high-resolution transmission electron microscopy. The photoluminescence spectra show the impact of concentration variation of Ce3+ on the photoluminescence emission of the phosphor. These nanophosphors display intense blue emission peaking at 422 nm generated by the Ce3+ 5d → 4f transition under 350 nm excitation. Our results reveal that this nanophosphor has the capability to take part in the emergent domain of solid-state lighting and field-emission display devices.


1993 ◽  
Vol 311 ◽  
Author(s):  
W.W. Hsieh ◽  
J.J. Lin ◽  
M.M. Wang ◽  
L.L. Chen

ABSTRACTSimultaneous occurrence of multiphases was observed in the interfacial reactions of ultrahigh vacuum deposited Ti, Hf and Cr thin films on (111)Si by high resolution transmission electron microscopy in conjunction with fast Fourier transform diffraction analysis and image simulation. For the three systems, an amorphous interlayer as well as a number of crystalline phase were found to form simultaneously in the early stages of interfacial reactions. The formation of multiphases appeared to be quite general in the initial stages of interfacial reactions of UHV deposited refractory thin films. The results called for a reexamination of generally accepted “difference” in reaction sequence between bulk and thin film couples.


Author(s):  
В.Ф. Кабанов ◽  
А.И. Михайлов ◽  
М.В. Гавриков

In this work, we studied the influence of the shape of the indium antimonide quantum dots of on some important electrophysical parameters by spectral characteristics analysis, transmission electron microscopy, scanning tunneling microscopy, a laser particle size analyzer, and scanning electron microscopy. It is shown that the real form of quantum dots (spherical and cubic models) at the same characteristic size will noticeably affect the energy spectrum of the investigated objects and, accordingly, their electrophysical and optical properties.


2021 ◽  
Vol 59 (6) ◽  
pp. 1755-1773
Author(s):  
José María González-Jiménez ◽  
Irina Tretiakova ◽  
Marco Fiorentini ◽  
Vladimir Malkovets ◽  
Laure Martin ◽  
...  

ABSTRACT This paper focuses on a nanoscale study of nano- and micrometer-size Os-rich mineral particles hosted in a Ni-Fe-Cu sulfide globule found in an olivine megacryst from the Udachnaya pipe (Yakutia, Russia). These platinum-group element mineral particles and their host sulfide matrices were investigated using a combination of techniques, including field emission gun electron probe microanalyzer, field emission scanning electron microscopy, and focused ion beam and high-resolution transmission electron microscopy. The sulfide globule is of mantle origin, as it is hosted in primitive olivine (Fo90–93), very likely derived from the crystallization of Ni-Fe-Cu sulfide melt droplets segregated by liquid immiscibility from a basaltic melt in a volume of depleted subcontinental lithospheric mantle. Microscopic observations by means of field emission scanning electron microscopy and single-spot analysis and mapping by field emission gun electron probe microanalyzer reveal that the sulfide globule comprises a core of pyrrhotite with flame-like exsolutions (usually <10 μm thickness) of pentlandite, which is irregularly surrounded by a rim of granular pentlandite and chalcopyrite. Elemental mapping by energy dispersive spectroscopy (acquired using the high-resolution transmission electron microscopy) of the pyrrhotite (+ pentlandite) core reveals that pentlandite exsolution in pyrrhotite is still observable at the nanoscale as fringes of 100 to 500 nm thicknesses. The sulfide matrices of pyrrhotite, pentlandite, and chalcopyrite contain abundant nano- and micrometer-size platinum group element mineral particles. A careful inspection of eight of these platinum group element particles under focused ion beam and high-resolution transmission electron microscopy showed that they are crystalline erlichmanite (OsS2) with well-developed crystal faces that are distinctively oriented relative to their sulfide host matrices. We propose that the core of the Ni-Fe-Cu sulfide globule studied here was derived from a precursor monosulfide solid solution originally crystallized from a sulfide melt at >1100 °C, which later decomposed into pyrrhotite and the pentlandite flame-like exsolutions upon cooling at <600 °C. Once solidified, the solid monosulfide solid solution reacted with non-equilibrium Cu-and Ni-rich sulfide melt(s), giving rise to the granular pentlandite in equilibrium with chalcopyrite now forming the rim of the sulfide globule. Meanwhile, nano- to micron-sized crystals of erlichmanite crystallized directly from or slightly before monosulfide solid solution from the sulfide melt. Thus, Os, and to a lesser extent Ir and Ru, were physically partitioned by preferential uptake via early formation of nanoparticles at high temperature instead of low-temperature exsolution from solid Ni-Fe-Cu sulfides. The new data provided in this paper highlight the necessity of studying platinum group element mineral particles in Ni-Fe-Cu sulfides using analytical techniques that can image nanoscale textural features in order to better understand the mechanisms of platinum group element fractionation in magmatic systems. These processes may play a crucial role in controlling the background geochemical budgets for siderophile and chalcophile elements in a wide range of mantle-derived magmas.


Minerals ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 206 ◽  
Author(s):  
James Hower ◽  
Dali Qian ◽  
Nicolas Briot ◽  
Eduardo Santillan-Jimenez ◽  
Madison Hood ◽  
...  

Fly ash from the combustion of eastern Kentucky Fire Clay coal in a southeastern United States pulverized-coal power plant was studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and selected area electron diffraction (SAED). TEM combined with elemental analysis via energy dispersive X-ray spectroscopy (EDS) showed that rare earth elements (REE; specifically, La, Ce, Nd, Pr, and Sm) were distributed within glassy particles. In certain cases, the REE were accompanied by phosphorous, suggesting a monazite or similar mineral form. However, the electron diffraction patterns of apparent phosphate minerals were not definitive, and P-lean regions of the glass consisted of amorphous phases. Therefore, the distribution of the REE in the fly ash seemed to be in the form of TEM-visible nano-scale crystalline minerals, with additional distributions corresponding to overlapping ultra-fine minerals and even true atomic dispersion within the fly ash glass.


2019 ◽  
Vol 34 (01n03) ◽  
pp. 2040005 ◽  
Author(s):  
Congzhi Zhang ◽  
Tao Han ◽  
Wei Wang ◽  
Jin Zhang

Dried plum-like ZnO assemblies consisting ZnO nanoparticles were synthesized by an ultrasonic spray pyrolysis method (USP). ZnO assemblies were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS) and field-emission transmission electron microscopy (TEM). The results show the size of ZnO assemblies is in the range of 300–870 nm, and that of ZnO nanoparticles is from 33 nm to 39 nm. The microstructure and size of ZnO assemblies were successfully controlled by the concentration of the precursor solution.


Sign in / Sign up

Export Citation Format

Share Document