Oxygen‐vacancy‐mediated microstructure and thermophysical properties in Zr 3 Ln 4 O 12 for high‐temperature applications

Author(s):  
Meng Zhao ◽  
Wei Pan ◽  
Tianjun Li ◽  
Muzhang Huang ◽  
Yujia Huang ◽  
...  
2006 ◽  
Vol 50 (2) ◽  
pp. 69-76 ◽  
Author(s):  
By Yoshihiro Terada ◽  
Kenji Ohkubo ◽  
Seiji Miura ◽  
Mohri Tetsuo

Author(s):  
R. E. Franck ◽  
J. A. Hawk ◽  
G. J. Shiflet

Rapid solidification processing (RSP) is one method of producing high strength aluminum alloys for elevated temperature applications. Allied-Signal, Inc. has produced an Al-12.4 Fe-1.2 V-2.3 Si (composition in wt pct) alloy which possesses good microstructural stability up to 425°C. This alloy contains a high volume fraction (37 v/o) of fine nearly spherical, α-Al12(Fe, V)3Si dispersoids. The improved elevated temperature strength and stability of this alloy is due to the slower dispersoid coarsening rate of the silicide particles. Additionally, the high v/o of second phase particles should inhibit recrystallization and grain growth, and thus reduce any loss in strength due to long term, high temperature annealing.The focus of this research is to investigate microstructural changes induced by long term, high temperature static annealing heat-treatments. Annealing treatments for up to 1000 hours were carried out on this alloy at 500°C, 550°C and 600°C. Particle coarsening and/or recrystallization and grain growth would be accelerated in these temperature regimes.


Alloy Digest ◽  
1952 ◽  
Vol 1 (2) ◽  

Abstract Flylite ZRE-1 is a creep resistant magnesium-base alloy primarily designed for jet engine components and other high temperature applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Mg-2. Producer or source: Howard Foundry Company.


Alloy Digest ◽  
1978 ◽  
Vol 27 (6) ◽  

Abstract THERMALLOY 63W is a cast nickel-chromium-tungsten-iron alloy produced for service at temperature up to 1900 F. Centrifugally cast reformer tubes comprise one of its high-temperature applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-352. Producer or source: Abex Corporation, Engineered Products Division.


2010 ◽  
Vol 25 (11) ◽  
pp. 1169-1174 ◽  
Author(s):  
Xiang-Ping JIANG ◽  
Qing YANG ◽  
Chao CHEN ◽  
Na TU ◽  
Zu-Deng YU ◽  
...  

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Lei Li ◽  
Guoxujia Chen ◽  
He Zheng ◽  
Weiwei Meng ◽  
Shuangfeng Jia ◽  
...  

AbstractFrom the mechanical perspectives, the influence of point defects is generally considered at high temperature, especially when the creep deformation dominates. Here, we show the stress-induced reversible oxygen vacancy migration in CuO nanowires at room temperature, causing the unanticipated anelastic deformation. The anelastic strain is associated with the nucleation of oxygen-deficient CuOx phase, which gradually transforms back to CuO after stress releasing, leading to the gradual recovery of the nanowire shape. Detailed analysis reveals an oxygen deficient metastable CuOx phase that has been overlooked in the literatures. Both theoretical and experimental investigations faithfully predict the oxygen vacancy diffusion pathways in CuO. Our finding facilitates a better understanding of the complicated mechanical behaviors in materials, which could also be relevant across multiple scientific disciplines, such as high-temperature superconductivity and solid-state chemistry in Cu-O compounds, etc.


Author(s):  
Richard A. Michi ◽  
Alex Plotkowski ◽  
Amit Shyam ◽  
Ryan R. Dehoff ◽  
Sudarsanam Suresh Babu

Sign in / Sign up

Export Citation Format

Share Document