scholarly journals The Physical Properties of Polymer Concrete for Ultra Thin Bridge Deck Pavement

Author(s):  
Hyeon Jun Kim ◽  
Yeong Hyo Son ◽  
Bum Jin Han ◽  
Ji Eun Jung ◽  
Sun Kyu Park
2021 ◽  
Vol 291 ◽  
pp. 123366
Author(s):  
Yang Liu ◽  
Zhendong Qian ◽  
Xijun Shi ◽  
Yuheng Zhang ◽  
Haisheng Ren

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 565
Author(s):  
Changbo Liu ◽  
Zhendong Qian ◽  
Yang Liao ◽  
Haisheng Ren

This study aims to evaluate the economy of a steel bridge deck pavement scheme (SBDPS) using a comprehensive life-cycle cost (LCC) analysis approach. The SBDPS are divided into the “epoxy asphalt concrete system”(EA system) and“ Gussasphalt concrete system”(GA system) according to the difference in the material in the lower layer of the SBDPS. A targeted LCC checklist, including manager cost and user cost was proposed, and a Markov-based approach was applied to establish a life-cycle performance model with clear probability characteristics for SBDPS. Representative traffic conditions were designed using a uniform design method, and the LCC of SBDPS under representative traffic conditions and different credibility (construction quality as a random factor) was compared. The reliability of the LCC analysis approach was verified based on the uncertainty analysis method. Based on an expert-scoring approach, a user cost weight was obtained to ensure it is considered reasonably in the LCC analysis. Compared with the cumulative traffic volume, the cumulative equivalent single axle loads (CESAL) have a closer relationship with the LCC. The GA system has better LCC when the CESAL is less, while the EA system is just the opposite. The breaking point of CESAL for the LCC of the EA system and the GA system is 15 million times. The LCC analysis of SBDPS should consider the influence of random factors such as construction quality. The comprehensive LCC analysis approach in this paper can provide suggestions for bridge-management departments to make a reasonable selection on SBDPS.


2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Wei Wang ◽  
Shuo Liu ◽  
Qizhi Wang ◽  
Wei Yuan ◽  
Mingzhang Chen ◽  
...  

Based on forced vibration tests for high-performance concrete (HPC), the influence of bridge vibration induced by traveling vehicle on compressive strength and durability of HPC has been studied. It is concluded that 1 d and 2 d compressive strength of HPC decreased significantly, and the maximum reduction rate is 9.1%, while 28 d compressive strength of HPC had a slight lower with a 3% maximal drop under the action of two simple harmonic vibrations with 2 Hz, 3 mm amplitude, and 4 Hz, 3 mm amplitude. Moreover, the vibration had a slight effect on the compressive strength of HPC when the simple harmonic vibration had 4 Hz and 1 mm amplitude; it is indicated that the amplitude exerts a more prominent influence on the earlier compressive strength with the comparison of the frequency. In addition, the impact of simple harmonic vibration on durability of HPC can be ignored; this shows the self-healing function of concrete resulting from later hydration reaction. Thus, the research achievements mentioned above can contribute to learning the laws by which bridge vibration affects the properties of concrete and provide technical support for the design and construction of the bridge deck pavement maintenance.


2009 ◽  
Vol 24 (2) ◽  
pp. 318-320 ◽  
Author(s):  
Shaopeng Wu ◽  
Guang Zhang ◽  
Jun Han ◽  
Gang Liu ◽  
Jie Zhou

2018 ◽  
Vol 2018 ◽  
pp. 1-8
Author(s):  
Fei Han ◽  
Dan-hui Dan ◽  
Hu Wang

In order to study the coupled influence of deck pavement roughness and velocity on dynamic amplification factor, a 2-DOF 1/4 vehicle model is employed to establish the vehicle-bridge-coupled vibration system. The random dynamic load of running vehicle simulated by software MATLAB is applied on bridge deck pavement (BDP) through ANSYS software. Besides, the influence of BDP parameters on control stress under static load and random vibration load is analyzed. The results show that if the surface of BDP is smooth, the dynamic magnification coefficient would first increase and then decrease with increasing of vehicle velocity and reach its maximum value when v = 20 m/s; if the surface of BDP is rough, the maximal and minimum values of the dynamic amplification coefficient (DAC) occur, respectively, when the velocity reaches 10 m/s and 15 m/s. For a composite bridge deck with the cushion layer, the thickness of asphalt pavement should be not too thick or thin and better to be controlled for about 10 cm; with the increasing of cushion layer thickness, the control stress of deck pavement is all decreased and show similar change regularity under effect of different loads. In view of self-weight of structure, the thickness of the cushion layer is recommended to be controlled for about 4 cm.


1977 ◽  
Vol 103 (9) ◽  
pp. 1887-1887
Author(s):  
Tse-Yung P. Chang ◽  
Howard L. Stephens

Sign in / Sign up

Export Citation Format

Share Document