FORCE APPROPRIATION METHOD FOR TWO DEGREES OF FREEDOM NONLINEAR SYSTEM

2015 ◽  
Vol 76 (8) ◽  
Author(s):  
Mohd Shahrir Mohd Sani ◽  
Muhamad Norhisham Abdul Rani ◽  
Mohd Azmi Yunus ◽  
Ahmad Azlan Mat Isa ◽  
Liyana Roslan
Keyword(s):  
Degrees Of Freedom ◽  
Indicator Function ◽  
Modal Testing ◽  
Modal Parameters ◽  
Nonlinear Structures ◽  
High Quality ◽  
Mode Identification ◽  
Multivariate Mode ◽  
Two Degree Of Freedom

In this paper, the vibrations of structures are investigated via force appropriation method in which modes are excited individually by forces. Multivariate mode indicator function (MMIF) is used in the modal testing for investigating the prospective nonlinearities in the structures. The method is applied to simulate two degree of freedom with simple nonlinearities. The results are presented and evaluated to indicate that the method has advantages when it comes to involving in mode by mode identification. Results calculated from modal assurance criteria (MAC) and modal purity indicator (MPI) show that the qualities of evaluating a pure normal mode are in satisfactory. This suggests that force appropriation method for nonlinear structures is reliable and efficient, particularly in terms of the isolation of individual modes and determination of high quality modal parameters.

scholarly journals Analytical and Experimental Study Using Output-Only Modal Testing for On-Orbit Satellite Appendages

2009 ◽  
Vol 2009 ◽  
pp. 1-10 ◽  
Author(s):  
Mashiul Alam ◽  
Ramin Sedaghati ◽  
Yvan Soucy ◽  
Rama B. Bhat
Keyword(s):  
Experimental Study ◽  
Model Updating ◽  
Flexible Structures ◽  
Modal Testing ◽  
Modal Parameters ◽  
Operational Conditions ◽  
Orbit Satellite ◽  
Potential Applications ◽  
Output Only

Output-only modal testing is an effective technique to identify the modal parameters of structural systems under ambient or operational conditions and has potential applications in civil, mechanical, and aerospace engineering. It may effectively be used for model validation, model updating, quality control, and health monitoring through the determination of modal characteristics of the structures. This approach to modal testing has great potential for ground and on-orbit modal testing of space hardware, especially for flexible structures such as membrane payloads where the operating and ambient excitations, such as firing of AC thrusters and ambient thermal shock, are difficult or impossible to measure. The main objective of this work is to conduct analytical and experimental study on output-only modal testing and to demonstrate its potential application to effectively extract modal parameters of an on-orbit satellite appendage.

Disability as a social phenomenon

2020 ◽  
pp. 22-38
Author(s):  
Natalia Guseva ◽  
Vitaliy Berdutin
Keyword(s):  
Social Protection ◽  
Russian Society ◽  
Stage Model ◽  
High Quality ◽  
Rehabilitation Programs ◽  
Current State ◽  
The Social ◽  
Consistent Solution ◽  
First Time

At present, the problem of establishing disability is a point at issue in Russia. Despite the fact that medical criteria for disability are being developed very actively, high-quality methods for assessing social hallmarks are still lacking. Since disability is a phenomenon inherent in any society, each state forms a social and economic policy for people with disabilities in accordance with its level of development, priorities and opportunities. We have proposed a three-stage model, which includes a system for the consistent solution of the main tasks aimed at studying the causes and consequences of the problems encountered today in the social protection of citizens with health problems. The article shows why the existing approaches to the determination of disability and rehabilitation programs do not correspond to the current state of Russian society and why a decrease in the rate of persons recognized as disabled for the first time does not indicate an improvement in the health of the population. The authors proposed a number of measures with a view to correcting the situation according to the results of the study.

scholarly journals Development of new total RNA isolation method for tissues with rich phenolic compounds

2020 ◽  
Vol 45 (4) ◽  
pp. 343-350
Author(s):  
Zafer Seçgin ◽  
Gökhan Gökdemir ◽  
Elif Seda Atabay ◽  
Aslıhan Kurt Kızıldoğan ◽  
Musa Kavas
Keyword(s):  
Phenolic Compounds ◽  
Rna Sequencing ◽  
Rna Isolation ◽  
Wall Structure ◽  
Isolation Method ◽  
High Quality ◽  
Ctab Method ◽  
Total Rna Isolation

AbstractBackgroundRNAs to be used in transcriptome analysis must be of high quality and pure in order to ensure maximum representation of the expressed genes. RNA isolation is difficult in hazelnut tissues containing large amounts of secondary metabolite, phenolic compounds and the cell wall structure. Commonly used protocols for RNA isolation are those that require a lot of labor and time and also do not allow sufficient RNA isolation when applied to tissues rich in phenolic compounds. This study was aimed to develop an efficient method for isolation of total RNAs from bud of hazelnut to be used in RNA sequencing.Materials and methodsAn optimized new method was successfully applied on three different hazelnuts genotypes (Çakıldak, Palaz, Tombul) and about 25 times higher amount of total RNAs per mg fresh tissues were obtained compared to classical CTAB method. Different methods have been tried for the isolation of RNA from hazelnut tissues and the determination of the quality of the obtained RNAs.ResultsThe quality and quantity of isolalated total RNAs were determined by spectrophotometer, electrophoresis and PCR. This success has been caught without any compromise of purity since A260/A280 ratios ranged from 1.90 to 2.04 and A260/A230 ratios were >2.0 in all purified RNAs.ConclusionThe total RNAs isolated with new protocol was found to be suitable for RNA sequencing and other molecular applications.

Determination of the Workspace of a Three-Degrees-of-Freedom Parallel Manipulator Using a Three-Dimensional Computer-Aided-Design Software Package and the Concept of Virtual Chains1

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Andrew Johnson ◽  
Xianwen Kong ◽  
James Ritchie
Keyword(s):  
Computer Aided Design ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Graphical Representation ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Workspace Analysis ◽  
Computer Aided ◽  
Aided Design

The determination of workspace is an essential step in the development of parallel manipulators. By extending the virtual-chain (VC) approach to the type synthesis of parallel manipulators, this technical brief proposes a VC approach to the workspace analysis of parallel manipulators. This method is first outlined before being illustrated by the production of a three-dimensional (3D) computer-aided-design (CAD) model of a 3-RPS parallel manipulator and evaluating it for the workspace of the manipulator. Here, R, P and S denote revolute, prismatic and spherical joints respectively. The VC represents the motion capability of moving platform of a manipulator and is shown to be very useful in the production of a graphical representation of the workspace. Using this approach, the link interferences and certain transmission indices can be easily taken into consideration in determining the workspace of a parallel manipulator.

scholarly journals Nonlinear Behavior of a Magnetic Bearing System

1995 ◽  
Vol 117 (3) ◽  
pp. 582-588 ◽  
Author(s):  
L. N. Virgin ◽  
T. F. Walsh ◽  
J. D. Knight
Keyword(s):  
Degrees Of Freedom ◽  
Initial Conditions ◽  
Nonlinear Behavior ◽  
Analytical Techniques ◽  
Magnetic Bearing ◽  
Forced Response ◽  
The Mathematical Model ◽  
Two Degree Of Freedom ◽  
Sensitivity To Initial Conditions ◽  
Bearing System

This paper describes the results of a study into the dynamic behavior of a magnetic bearing system. The research focuses attention on the influence of nonlinearities on the forced response of a two-degree-of-freedom rotating mass suspended by magnetic bearings and subject to rotating unbalance and feedback control. Geometric coupling between the degrees of freedom leads to a pair of nonlinear ordinary differential equations, which are then solved using both numerical simulation and approximate analytical techniques. The system exhibits a variety of interesting and somewhat unexpected phenomena including various amplitude driven bifurcational events, sensitivity to initial conditions, and the complete loss of stability associated with the escape from the potential well in which the system can be thought to be oscillating. An approximate criterion to avoid this last possibility is developed based on concepts of limiting the response of the system. The present paper may be considered as an extension to an earlier study by the same authors, which described the practical context of the work, free vibration, control aspects, and derivation of the mathematical model.

Investigation of Train Dynamics in Passing Through Curves Using a Full Model

Joint Rail ◽  
2004 ◽  
Author(s):  
Mohammad Durali ◽  
Mohammad Mehdi Jalili Bahabadi
Keyword(s):  
Degrees Of Freedom ◽  
Equations Of Motion ◽  
Three Dimensional ◽  
Full Model ◽  
Bogie Frame ◽  
Nonlinear Characteristics ◽  
Train Derailment ◽  
Train Dynamics

In this article a train model is developed for studying train derailment in passing through bends. The model is three dimensional, nonlinear, and considers 43 degrees of freedom for each wagon. All nonlinear characteristics of suspension elements as well as flexibilities of wagon body and bogie frame, and the effect of coupler forces are included in the model. The equations of motion for the train are solved numerically for different train conditions. A neural network was constructed as an element in solution loop for determination of wheel-rail contact geometry. Derailment factor was calculated for each case. The results are presented and show the major role of coupler forces on possible train derailment.

A NUCLEAR MANY-BODY THEORY AT FINITE TEMPERATURE APPLIED TO A PROTONEUTRON STAR

2002 ◽  
Vol 11 (02) ◽  
pp. 83-104 ◽  
Author(s):  
GUILHERME F. MARRANGHELLO ◽  
CESAR A. Z. VASCONCELLOS ◽  
MANFRED DILLIG ◽  
J. A. DE FREITAS PACHECO
Keyword(s):  
Phase Transition ◽  
Nuclear Matter ◽  
Finite Temperature ◽  
Degrees Of Freedom ◽  
Many Body ◽  
Many Body Theory ◽  
The Masses ◽  
Protoneutron Stars ◽  
Protoneutron Star

Thermodynamical properties of nuclear matter are studied in the framework of an effective many-body field theory at finite temperature, considering the Sommerfeld approximation. We perform the calculations by using the nonlinear Boguta and Bodmer model, extended by the inclusion of the fundamental baryon octet and leptonic degrees of freedom. Trapped neutrinos are also included in order to describe protoneutron star properties through the integration of the Tolman–Oppenheimer–Volkoff equations, from which we obtain, beyond the standard relations for the masses and radii of protoneutron stars as functions of the central density, new results of these quantities as functions of temperature. Our predictions include: the determination of an absolute value for the limiting mass of protoneutron stars; new structural aspects on the nuclear matter phase transition via the behavior of the specific heat and, through the inclusion of quark degrees of freedom, the properties of a hadron-quark phase transition and hybrid protoneutron stars

Sign in / Sign up

Export Citation Format

Share Document