Volumetric Three-Componential Velocity Measurements (V3v) of Flow Structure Behind Mangrove-Root Type Models

2021 ◽  
Author(s):  
Amirkhosro Kazemi ◽  
Eduardo Castillo ◽  
Ruben Hortensius ◽  
Stamatios Pothos ◽  
Oscar Curet
1995 ◽  
Vol 117 (1) ◽  
pp. 17-23 ◽  
Author(s):  
G. Papadopoulos ◽  
M. V. O¨tu¨gen

The incompressible turbulent flow over a backward-facing step in a rectangular duct was investigated experimentally. The side wall effects on the core flow were determined by varying the aspect ratio (defined as the step span-to-height ratio) from 1 to 28. The Reynolds number, based on the step height and the oncoming free-stream velocity, was 26,500. Detailed velocity measurements were made, including the turbulent stresses, in a region which extended past the flow reattachment zone. Wall static pressure was also measured on both the step and flat walls. In addition, surface visualizations were obtained on all four walls surrounding the separated flow to supplement near-wall velocity measurements. The results show that the aspect ratio has an influence on both the velocity and wall pressure even for relatively large aspect ratios. For example, in the redevelopment region downstream of reattachment, the recovery pressure decreases with smaller aspect ratios. The three-dimensional side wall effects tend to slow down the relaxation downstream of reattachment for smaller aspect ratios as evidenced by the evolution of the velocity field. For the two smallest aspect ratios investigated, higher centerplane streamwise and transverse velocities were obtained which indicate a three-dimensional mean flow structure along the full span of the duct.


Author(s):  
Amirkhosro Kazemi ◽  
Eduardo E. Castillo ◽  
Oscar Curet ◽  
Ruben Hortensius ◽  
Pothos Stamatios

Abstract Mangrove roots produce complex flow structure interactions with their environment, which affect the nutrient, habitat and aquatic animals. Analysis of the flow structure behind the roots extends to a broad range of mangrove-inspired applications that provides understanding into complex flows encountered in unidirectional riverine flows. In this work, we modeled the mangrove roots with a cluster of rigid circular cylinders to investigate the vortex structure downstream of the models. The vortex organization of the patch of cylinder wakes was studied experimentally by time-resolved volumetric three-componential volumetric velocimetry (V3V) at Reynolds numbers 1014 and 3549. The results show that the vortex structure in the 3-D flow field reveals a regular shedding at Re = 1014, forming von Kármán vortices dominating the 3D motion. The flow structure behind rigid patches is coherent and the streamwise velocity remains unchanged. The regime for a flexible patch at Re = 3549 produces an intricate pattern where the multiple counter-rotating vortexes distorted substantially and forming a chain of rhombus-like vortex cells in the near wake. The information for the 3D flow feature provides useful information to a robust structure for Seawall erosion.


2006 ◽  
Vol 10 (2) ◽  
pp. 113-125 ◽  
Author(s):  
Dejan Cvetinovic ◽  
Munenori Ukai ◽  
Kazuyoshi Nakabe ◽  
Kenjiro Suzuki

Author(s):  
Hidekazu No ◽  
Michel Call ◽  
Akira T. Tokuhiro

An experimental study was conducted on the flow structure in the near-wake of a hollow cap with an air bubble attached underneath and a solid object possessing a bubble-like shape. The objective of the study was to elucidate distinguishing wake flow characteristics of the capped bubble relative to the solid. The experiment was performed in a square channel, 80×80mm2 in cross section. The bubble and solid were separately suspended in downward flow of purified water. Both the capped bubble and the solid were ellipsoidal in shape (the cap was shaped to represent the front of an ellipsoidal bubble) and had an approximate volume of 0.8ml. The Reynolds number for the flow, based on the objects’ equivalent diameter and average downward flow velocity (U = 25cm/s), was Re ≅ 2800. Velocity measurements were taken using Particle Image Velocimetry. The obtained velocity data were analyzed to deduce vorticity, turbulent kinetic energy, production, and Reynolds stress. Graphic and numerical comparisons between the two cases were made. The results to date are discussed.


2007 ◽  
Vol 2007 ◽  
pp. 1-17 ◽  
Author(s):  
S. Kliem ◽  
B. Hemström ◽  
Y. Bezrukov ◽  
T. Höhne ◽  
U. Rohde

Coolant mixing is an important mitigative mechanism against reactivity accidents caused by local boron dilution. Experiments on coolant mixing were carried out at three different test facilities representing three different reactor types. These are the ROCOM test facility modelling a German KONVOI-type reactor, the Vattenfall test facility being a model of a Westinghouse three-loop PWR, and the Gidropress test facility modelling a VVER-1000 PWR. The scenario of the start-up of the first main coolant pump was investigated in all three facilities. The experiments were accompanied by velocity measurements in the downcomer for the same scenario in the ROCOM and the Vattenfall test facilities. A similar flow structure was found in these measurements in both cases. A maximum of the velocity is measured at the opposite side in regard to the position of the loop with the starting-up pump whilst a recirculation area was found just below this inlet nozzle in both facilities. The analysis of the slug mixing experiments showed also comparable flow behaviour. In accordance with the velocity measurements, the first part of the deboration is also found on the opposite side. In this region, the maximum deboration is measured in all three cases. These maximum values are in the same order of magnitude for nearly identical initial slug volumes.


Author(s):  
V. Gilard ◽  
L.-E. Brizzi

Velocity measurements by PIV are realized in order to compare a slot jet and round jets impinging a curved surface. A statistical data processing allows us to obtain the mean velocity fields and the Reynolds stresses. For the two jet geometries, the flow structure is described. Some velocity distributions according to different axis are extracted of the mean velocity fields and are also described.


1980 ◽  
Vol 99 (1) ◽  
pp. 111-127 ◽  
Author(s):  
J. M. Owen ◽  
J. R. Pincombe

Flow visualization and laser-doppler anemometry have been used to determine the flow structure and measure the velocity distribution inside a rotating cylindrical cavity with an outer to inner radius ratio of 10, and an axial spacing to inner radius ratio of 2·67. A flow structure comprising an inner layer, Ekman layers, an outer layer and an interior potential core has been confirmed for the cases where the inlet air enters the cavity either axially, through a central hole, or radially, through a central gauze tube, and leaves radially through a series of holes in the peripheral shroud. Velocity measurements in the laminar Ekman layers agree well with the ‘modified linear theory’, and long-and short-wavelength disturbances (which have been reported by other experimenters) have been observed on the Ekman layers when the radial Reynolds number exceeds a critical value. The phenomenon of reverse flow in the Ekman layers and the possibility of ingress of external fluid through the holes in the shroud have also been observed.


Sign in / Sign up

Export Citation Format

Share Document