Particle-Level Investigation of Densification During Uniaxial Hot Pressing: Continuum Modeling and Experiments

1992 ◽  
Vol 114 (1) ◽  
pp. 105-110 ◽  
Author(s):  
R. L. Williamson ◽  
J. R. Knibloe ◽  
R. N. Wright
Keyword(s):  
Hot Pressing ◽  
Composite System ◽  
Microstructural Development ◽  
Stress And Strain ◽  
Densification Rate ◽  
Strain Fields ◽  
Particle Distributions ◽  
Particle Level ◽  
Modeling And Experiments ◽  
Individual Particles

A combination of continuum models and experiments is used to investigate the deformation of individual particles during hot pressing. Results are described for both monosized and bimodal particle distributions, including a simple bimodal composite system. The effects of pressure and temperature on the densification rate, particle shape, and stress and strain fields are described. The detailed strain fields calculated by the model are useful for predicting microstructural development during the pressing process and thus can aid in the design of optimal pressing cycles.

Processing and characterization of YBa2Cu3O7−x/Ag composites

1990 ◽  
Vol 48 (4) ◽  
pp. 46-47
Author(s):  
Jafar Javadpour ◽  
Bradley L. Thiel ◽  
Sarikaya Mehmet ◽  
Ilhan A. Aksay
Keyword(s):  
Composite System ◽  
Precursor Solution ◽  
Microstructural Development ◽  
Superconducting Properties ◽  
Practical Applications ◽  
Nitrate Precursor ◽  
Cold Pressed ◽  
Tape Cast ◽  
Composite Samples

Practical applications of bulk YBa2Cu3O7−x materials have been limited because of their inadequate critical current density (jc) and poor mechanical properties. Several recent reports have indicated that the addition of Ag to the YBa2Cu3O7−x system is beneficial in improving both mechanical and superconducting properties. However, detailed studies concerning the effect of Ag on the microstructural development of the cermet system have been lacking. Here, we present some observations on the microstructural evolution in the YBa2Cu3O7−x/Ag composite system.The composite samples were prepared by mixing various amounts (2.5 - 50 wt%) AgNO3 in the YBa2Cu3O7−x nitrate precursor solution. These solutions were then spray dried and the resulting powders were either cold pressed or tape cast. The microstructures of the sintered samples were analyzed using SEM (Philips 515) and an analytical TEM (Philips 430T).The SEM micrographs of the compacts with 2.5 and 50 wt% Ag addition sintered at 915°C (below the melting point of Ag) for 1 h in air are displayed in Figs. 1 and 2, respectively.

Mathematical Model of the Effective Properties of a Fiber Reinforced Composite with a Linearly Graded Transition Zone

2010 ◽  
Vol 38 (4) ◽  
pp. 286-307
Author(s):  
Carey F. Childers
Keyword(s):  
Mathematical Model ◽  
Transition Zone ◽  
Effective Properties ◽  
Local Stress ◽  
Stress And Strain ◽  
Fiber Reinforced ◽  
Strain Fields ◽  
Shear Moduli ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite

Abstract Tires are fabricated using single ply fiber reinforced composite materials, which consist of a set of aligned stiff fibers of steel material embedded in a softer matrix of rubber material. The main goal is to develop a mathematical model to determine the local stress and strain fields for this isotropic fiber and matrix separated by a linearly graded transition zone. This model will then yield expressions for the internal stress and strain fields surrounding a single fiber. The fields will be obtained when radial, axial, and shear loads are applied. The composite is then homogenized to determine its effective mechanical properties—elastic moduli, Poisson ratios, and shear moduli. The model allows for analysis of how composites interact in order to design composites which gain full advantage of their properties.

scholarly journals Crystalline shielding mitigates structural rearrangement and localizes memory in jammed systems under oscillatory shear

2021 ◽  
Vol 7 (20) ◽  
pp. eabe3392
Author(s):  
Erin G. Teich ◽  
K. Lawrence Galloway ◽  
Paulo E. Arratia ◽  
Danielle S. Bassett
Keyword(s):  
Local Structure ◽  
Disordered Systems ◽  
Amorphous Materials ◽  
Structural Rearrangement ◽  
Oscillatory Shear ◽  
Disordered Materials ◽  
Rheological Measurements ◽  
Particle Level ◽  
Individual Particles

The nature of yield in amorphous materials under stress has yet to be fully elucidated. In particular, understanding how microscopic rearrangement gives rise to macroscopic structural and rheological signatures in disordered systems is vital for the prediction and characterization of yield and the study of how memory is stored in disordered materials. Here, we investigate the evolution of local structural homogeneity on an individual particle level in amorphous jammed two-dimensional (athermal) systems under oscillatory shear and relate this evolution to rearrangement, memory, and macroscale rheological measurements. We define the structural metric crystalline shielding, and show that it is predictive of rearrangement propensity and structural volatility of individual particles under shear. We use this metric to identify localized regions of the system in which the material’s memory of its preparation is preserved. Our results contribute to a growing understanding of how local structure relates to dynamic response and memory in disordered systems.

The stress and strain fields in the neighbourhood of a notch in polyethylene

Polymer ◽  
1989 ◽  
Vol 30 (8) ◽  
pp. 1456-1461 ◽  
Author(s):  
Xue-qin Wang ◽  
Norman Brown
Keyword(s):  
Stress And Strain ◽  
Strain Fields

Endochronic Analysis of Cyclic Elastoplastic Strain Fields in a Notched Plate

1983 ◽  
Vol 50 (4a) ◽  
pp. 789-794 ◽  
Author(s):  
K. C. Valanis ◽  
J. Fan
Keyword(s):  
Residual Stress ◽  
Numerical Scheme ◽  
External Loading ◽  
Stress And Strain ◽  
Elastoplastic Strain ◽  
Residual Stress Field ◽  
Progressive Change ◽  
Strain Fields ◽  
Cyclic Tension ◽  
Cyclic Elastoplastic Strain

In this paper we present an analytical cum-numerical scheme, based on endochronic plasticity and the finite element formalism. The scheme is used to calculate the stress and elastoplastic strain fields in a plate loaded cyclically in its own plane along its outer edges and bearing two symmetrically disposed edge notches. One most important result that stands out is that while the external loading conditions are symmetric and periodic, the histories of stress and strain at the notch tip are neither symmetric nor periodic in character. In cyclic tension ratcheting phenomena at the tip of the notches prevail and a progressive change of the residual stress field at the notch line is shown to occur.

scholarly journals Biomechanical Aspects of Closing Approaches in Postcarotid Endarterectomy

2018 ◽  
Vol 2018 ◽  
pp. 1-10
Author(s):  
Idit Avrahami ◽  
Dafna Raz ◽  
Oranit Bash
Keyword(s):  
Carotid Bifurcation ◽  
Stress And Strain ◽  
Surgery Complications ◽  
Artery Wall ◽  
Strain Fields ◽  
Structure Interaction ◽  
Cerebral Blood Supply ◽  
Patch Angioplasty ◽  
Alternative Approach ◽  
The Common

The carotid bifurcation tends to develop atherosclerotic stenoses which might interfere with cerebral blood supply. In cases of arterial blockage, the common clinical solution is to remove the plaque via carotid endarterectomy (CEA) surgery. Artery closure after surgery using primary closures along the cutting edge might lead to artery narrowing and restrict blood flow. An alternative approach is patch angioplasty which takes longer time and leads to more during-surgery complications. The present study uses numerical methods with fluid-structure interaction (FSI) to explore and compare the two solutions in terms of hemodynamics and stress and strain fields developed in the artery wall.

Sign in / Sign up

Export Citation Format

Share Document