scholarly journals MIMO Active Vibration Control of Magnetically Suspended Flywheels for Satellite IPAC Service

2008 ◽  
Vol 130 (4) ◽  
Author(s):  
Junyoung Park ◽  
Alan Palazzolo ◽  
Raymond Beach
Keyword(s):  
Vibration Control ◽  
Attitude Control ◽  
High Frequency ◽  
Active Vibration Control ◽  
Control Algorithms ◽  
Control Law ◽  
Frequency Noise ◽  
Active Vibration ◽  
Simulation Results ◽  
And Control

Theory and simulation results have demonstrated that four, variable speed flywheels could potentially provide the energy storage and attitude control functions of existing batteries and control moment gyros on a satellite. Past modeling and control algorithms were based on the assumption of rigidity in the flywheel’s bearings and the satellite structure. This paper provides simulation results and theory, which eliminates this assumption utilizing control algorithms for active vibration control (AVC), flywheel shaft levitation, and integrated power transfer and attitude control (IPAC), that are effective even with low stiffness active magnetic bearings (AMBs) and flexible satellite appendages. The flywheel AVC and levitation tasks are provided by a multiple input–multiple output control law that enhances stability by reducing the dependence of the forward and backward gyroscopic poles with changes in flywheel speed. The control law is shown to be effective even for (1) large polar to transverse inertia ratios, which increases the stored energy density while causing the poles to become more speed dependent, and for (2) low bandwidth controllers shaped to suppress high frequency noise. Passive vibration dampers are designed to reduce the vibrations of flexible appendages of the satellite. Notch, low-pass, and bandpass filters are implemented in the AMB system to reduce and cancel high frequency, dynamic bearing forces and motor torques due to flywheel mass imbalance. Successful IPAC simulation results are presented with a 12% initial attitude error, large polar to transverse inertia ratio (IP∕IT), structural flexibility, and unbalance mass disturbance.

Substructuring Dynamic Modeling and Active Vibration Control of a Smart Parallel Platform

2004 ◽  
Author(s):  
Xiaoyun Wang ◽  
James K. Mills
Keyword(s):  
Vibration Control ◽  
Dynamic Model ◽  
Motion Control ◽  
Dynamic Models ◽  
Active Vibration Control ◽  
System Dynamic ◽  
Control Law ◽  
Active Vibration ◽  
Parallel Platform ◽  
Simulation Results

A substructuring approach to derive dynamic models for closed-loop mechanisms is applied to model a flexible-link planar parallel platform with Lead Zirconate Titanate (PZT) transducers. The Lagrangian Finite Element (FE) formulation is used to model flexible linkages, in which translational and rotary degrees of freedom exist. Craig-Bampton mode sets are extracted from these FE models and then used to assemble the dynamic model of the planar parallel platform through the application of Lagrange’s equation and the Lagrange multiplier method. Electromechanical coupling models of surface-bonded PZT transducers with the host flexible linkages are introduced to the reduced order dynamic models of flexible linkages. The assembled system dynamic model with moderate model order can represent essential system dynamic behavior and maintain kinematic relationships of the planar parallel platform. A Proportional, Integral, and Derivative (PID) control law is used as the motion control law. Strain rate feedback (SRF) active vibration control is selected as the vibration control law. Motion control simulation results with active vibration control and simulation results without active vibration control are compared. The comparison shows the effectiveness of active vibration control.

Frequency Shaped Semi-Active Control for Magnetorheological Fluid-Based Vibration Control Systems

2013 ◽  
Author(s):  
Young-Tai Choi ◽  
Norman M. Wereley ◽  
Gregory J. Hiemenz
Keyword(s):  
Vibration Control ◽  
Control Systems ◽  
Active Control ◽  
Control Algorithm ◽  
Active Vibration Control ◽  
Control Algorithms ◽  
Model Parameters ◽  
Mr Fluid ◽  
Control Current ◽  
Active Vibration

Novel semi-active vibration controllers are developed in this study for magnetorheological (MR) fluid-based vibration control systems, including: (1) a band-pass frequency shaped semi-active control algorithm, (2) a narrow-band frequency shaped semi-active control algorithm. These semi-active vibration control algorithms designed without resorting to the implementation of an active vibration control algorithms upon which is superposed the energy dissipation constraint. These new Frequency Shaped Semi-active Control (FSSC) algorithms require neither an accurate damper (or actuator) model, nor system identification of damper model parameters for determining control current input. In the design procedure for the FSSC algorithms, the semi-active MR damper is not treated as an active force producing actuator, but rather is treated in the design process as a semi-active dissipative device. The control signal from the FSSC algorithms is a control current, and not a control force as is typically done for active controllers. In this study, two FSSC algorithms are formulated and performance of each is assessed via simulation. Performance of the FSSC vibration controllers is evaluated using a single-degree-of-freedom (DOF) MR fluid-based engine mount system. To better understand the control characteristics and advantages of the two FSSC algorithms, the vibration mitigation performance of a semi-active skyhook control algorithm, which is the classical semi-active controller used in base excitation problems, is compared to the two FSSC algorithms.

scholarly journals A Review of Low-Frequency Active Vibration Control of Seat suspension Systems

2019 ◽  
Vol 9 (16) ◽  
pp. 3326 ◽  
Author(s):  
Zhao ◽  
Wang
Keyword(s):  
Vibration Control ◽  
Active Vibration Control ◽  
Low Frequency ◽  
Control Algorithms ◽  
Seat Suspension ◽  
Suspension Systems ◽  
Low Frequency Vibration ◽  
Recent Developments ◽  
Active Vibration ◽  
Artificial Neural Network Ann

As a major device for reducing vibration and protecting passengers, the low-frequency vibration control performance of commercial vehicle seating systems has become an attractive research topic in recent years. This article reviews the recent developments in active seat suspensions for vehicles. The features of active seat suspension actuators and the related control algorithms are described and discussed in detail. In addition, the vibration control and reduction performance of active seat suspension systems are also reviewed. The article also discusses the prospects of the application of machine learning, including artificial neural network (ANN) control algorithms, in the development of active seat suspension systems for vibration control.

scholarly journals A Comparative Study Based on Different Control Algorithms for Suppressing Multistage Gear Transmission System Vibrations

2018 ◽  
Vol 2018 ◽  
pp. 1-16
Author(s):  
Wenhao Sun ◽  
Feng Zhang ◽  
Weidong Zhu ◽  
Han Wang ◽  
Shunan Luo ◽  
...  
Keyword(s):  
Vibration Control ◽  
Active Vibration Control ◽  
Transmission System ◽  
Gear Transmission ◽  
Control Algorithms ◽  
Control Force ◽  
The Finite Element Method ◽  
Control Schemes ◽  
Gear Transmission System ◽  
Active Vibration

A modal analysis (MA) was preconsidered to determine a novel active vibration control (AVC) structure of multistage gear transmission system (MGTS) and an appropriate actuating position for the piezoelectric actuator (PZT); the results of the calculating method and the finite element method (FEM) were compared to validate the reliability of MA. The controllers based on different control algorithms were designed to drive the PZTs to output the control force for suppressing the host structure vibrations. To analyze the feasibility of the applied control schemes and discuss the control effects dominated by the different control algorithms, a series of active vibration control numerical simulations were studied. The cosimulation results validate the practicability of the proposed control schemes and provide a forcible guidance for the further experimental works.

Active Vibration Control for Lathe Based Neural Network

2011 ◽  
Vol 84-85 ◽  
pp. 183-187 ◽  
Author(s):  
Jin Hua Wang ◽  
Wen Juan Huang ◽  
Hong Yan Zhang ◽  
Yao Gang Li
Keyword(s):  
Neural Network ◽  
Control System ◽  
Vibration Control ◽  
Active Vibration Control ◽  
System Model ◽  
Matlab Simulation ◽  
Model Based ◽  
Active Vibration ◽  
Simulation Results ◽  
Control System Model

In this paper, we took lathe as the research object, and established an active vibration control system model based on neural network AVC (Active Vibration Control) system, and the Matlab simulation results showed that the AVC system can reduce vibration effectively and improve the lathe’s accuracy.

Vibration Control of Parallel Identical Flexible Structures Using Interactive Force

2001 ◽  
Author(s):  
Shigeru Kougo ◽  
Hiroshi Fujihara ◽  
Katsuhiko Yoshida ◽  
Hiroyuki Tanaka ◽  
Toru Watanabe ◽  
...  
Keyword(s):  
Vibration Control ◽  
Control Experiment ◽  
Natural Frequencies ◽  
Control Mechanism ◽  
Reaction Force ◽  
Active Vibration Control ◽  
Flexible Structures ◽  
Control Performance ◽  
Active Vibration ◽  
And Control

Abstract This paper deals with active vibration control of two identical flexible structures arranged in parallel. One of the authors had presented a vibration control mechanism so that two or more structures are connected via non-contact actuators in which one structure is utilized as a reaction wall for another structure’s control mutually. However, in such a mechanism, the control performance reduces as the natural frequencies of structures become closer. In this report, authors present a modified mechanism in which actuators are connected to the structures with long arms so that the direction of vibration in a mode differs on each structure. In this way, the reaction force from the actuator on structure is introduced to another structure for dissipative force even if the properties of structures are identical. Computer simulation and control experiment are carried out and the effectiveness of presented mechanism is confirmed.

Active Vibration Control of the Axially Moving String by Wave Cancellation

1993 ◽  
Author(s):  
C. H. Chung ◽  
C. A. Tan
Keyword(s):  
Vibration Control ◽  
Active Vibration Control ◽  
Closed Form Expression ◽  
Control Law ◽  
Closed Loop System ◽  
Controlled System ◽  
Axially Moving String ◽  
Active Vibration ◽  
Axially Moving ◽  
Actuation Devices

Abstract Active vibration control of an axially moving string by wave cancellation is presented. The control problem is formulated in the frequency domain. An exact, closed-form expression for the transfer function of the closed-loop system, consisting of the flexible structure, a feedback control law and the dynamics of the sensing and actuation devices, is derived. It is shown that all vibration modes can be stabilized and that the controlled system has no resonance. Moreover, the designed controller is applicable to the control of the string transverse vibration under various kinds of loading and constraint conditions. Results for the response of the controlled string under different excitations are presented and discussed along with the wave propagation and cancellation characteristics.

Vibration Control of a Beam Using the Nearly Optimal Control Algorithm with a Disturbance Force Observer

2001 ◽  
Vol 17 (4) ◽  
pp. 173-177
Author(s):  
Der-An Wang ◽  
Yii-Mai Huang
Keyword(s):  
Optimal Control ◽  
Feedback Control ◽  
Vibration Control ◽  
Feedforward Control ◽  
Active Vibration Control ◽  
Asymptotic Properties ◽  
Control Law ◽  
Flexible Beam ◽  
Active Vibration ◽  
Modal Space

ABSTRACTActive vibration control of a flexible beam subjected to arbitrary, unmeasurable disturbance forces is investigated in this paper. The concept of independent modal space control is adopted. Both the feedforward and feedback control is implemented here to reduce the beam vibration. Because of the existence of the disturbance forces, the feedforward control is applied by employing the idea of force cancellation. A modal space disturbance force observer is then established in this paper to observe the disturbance modal forces for the feedforward control. For obtaining the feedforward and feedback control gains with the optimal sense, the nearly optimal control law is derived, where the modal disturbance forces are regarded as additional states. The vibration control performances and the asymptotic properties of the control law are discussed.

Sign in / Sign up

Export Citation Format

Share Document