scholarly journals Piezoelectric Pushers for Active Vibration Control of Rotating Machinery

1989 ◽  
Vol 111 (3) ◽  
pp. 298-305 ◽  
Author(s):  
A. B. Palazzolo ◽  
R. R. Lin ◽  
R. M. Alexander ◽  
A. F. Kascak ◽  
J. Montague
Keyword(s):  
Feedback Control ◽  
Vibration Control ◽  
Active Control ◽  
Active Vibration Control ◽  
Rotating Machinery ◽  
Nasa Lewis Research ◽  
Control Methods ◽  
Test Rig ◽  
Related Theory ◽  
Active Vibration

The active control of rotordynamic vibrations and stability by magnetic bearings and electromagnetic shakers has been discussed extensively in the literature. These devices, though effective, are usually large in volume and add significant weight to the stator. The use of piezoelectric pushers may provide similar degrees of effectiveness in light, compact packages. This paper contains analyses which extend quadratic regulator and derivative feedback control methods to the “prescribed displacement” character of piezoelectric pushers. The structrual stiffness of the pusher is also included in the theory. Tests are currently being conducted at NASA Lewis Research Center with piezoelectric pusher-based active vibration control. The paper presents results performed on the NASA test rig as preliminary verification of the related theory.

Active Vibration Control Methods of Axially Moving Materials - A Review

2004 ◽  
Vol 10 (4) ◽  
pp. 475-491 ◽  
Author(s):  
Jianjun Wang ◽  
Qihan Li
Keyword(s):  
Transfer Function ◽  
Vibration Control ◽  
Active Control ◽  
Control Method ◽  
Active Vibration Control ◽  
Control Methods ◽  
The Past ◽  
Active Vibration ◽  
Axially Moving ◽  
Active Wave

In this paper we provide a review of the state of the art for active vibration control of axially moving materials (string and beam, etc.) in the past ten years, with particular regard to the subjects of some important active control methods of axially moving strings. First, an introduction is given to explain the aims and scope of this paper. This is followed by a comprehensive discussion of the active wave control methods presented by many investigators in the past ten years, including feedback control methods (such as the modal control method, the direct velocity feedback control method and the control method via transfer function formulation), active wave control methods combining transfer function, boundary control methods using the Lyapunov function, the variable structure control method, the adaptive control method, the vibration control of an axially moving beam and the active control of a moving material with arbitrarily varying length, etc. Finally, we conclude with a discussion of several issues for future research in this area.

Frequency Shaped Semi-Active Control for Magnetorheological Fluid-Based Vibration Control Systems

2013 ◽  
Author(s):  
Young-Tai Choi ◽  
Norman M. Wereley ◽  
Gregory J. Hiemenz
Keyword(s):  
Vibration Control ◽  
Control Systems ◽  
Active Control ◽  
Control Algorithm ◽  
Active Vibration Control ◽  
Control Algorithms ◽  
Model Parameters ◽  
Mr Fluid ◽  
Control Current ◽  
Active Vibration

Novel semi-active vibration controllers are developed in this study for magnetorheological (MR) fluid-based vibration control systems, including: (1) a band-pass frequency shaped semi-active control algorithm, (2) a narrow-band frequency shaped semi-active control algorithm. These semi-active vibration control algorithms designed without resorting to the implementation of an active vibration control algorithms upon which is superposed the energy dissipation constraint. These new Frequency Shaped Semi-active Control (FSSC) algorithms require neither an accurate damper (or actuator) model, nor system identification of damper model parameters for determining control current input. In the design procedure for the FSSC algorithms, the semi-active MR damper is not treated as an active force producing actuator, but rather is treated in the design process as a semi-active dissipative device. The control signal from the FSSC algorithms is a control current, and not a control force as is typically done for active controllers. In this study, two FSSC algorithms are formulated and performance of each is assessed via simulation. Performance of the FSSC vibration controllers is evaluated using a single-degree-of-freedom (DOF) MR fluid-based engine mount system. To better understand the control characteristics and advantages of the two FSSC algorithms, the vibration mitigation performance of a semi-active skyhook control algorithm, which is the classical semi-active controller used in base excitation problems, is compared to the two FSSC algorithms.

The Design and Application of Piezoelectric Friction Damper with Self-Powered and Sensing Control System

2010 ◽  
Vol 163-167 ◽  
pp. 2477-2481
Author(s):  
Na Xin Dai ◽  
Ping Tan ◽  
Fu Lin Zhou
Keyword(s):  
Control System ◽  
Vibration Control ◽  
Active Control ◽  
Mechanical Energy ◽  
Active Vibration Control ◽  
Friction Damper ◽  
Active Vibration ◽  
Self Powered ◽  
Control Equation ◽  
Converse Piezoelectric Effect

To make the active and semi-active vibration control system in civil engineering get rid of external power supply, a new piezoelectric friction damper with self-power and sensing is designed in this paper and a semi-active control system based on this damper is presented. This system includes three key parts: a piezoelectric friction damper, a power generator based on the piezoelectric stack electro-mechanical energy conversion and a control circuit. It makes full use of the direct and converse piezoelectric effect. At the same time, it also overcomes the deficiency that the frictional force as damping can not be accurately desired in semi-active vibration control system. On the basis of it, the control equation of PFD is formulated. Numerical simulations for seismic protection of story isolation equipped with this system excited by a historical earthquake are conducted by MATLAB. Skyhook control is used to command a piezoelectric friction damper in the semi-active control. It is noticed that only one accelerometer is needed to monitor the response to realize the skyhook control, which greatly simplifies the classical semi-active vibration control system.

Use of piezoelectric actuators in active vibration control of rotating machinery

1990 ◽  
Author(s):  
Reng R. Lin ◽  
Alan B. Palazzolo ◽  
Albert F. Kascak ◽  
Gerald Montague
Keyword(s):  
Vibration Control ◽  
Active Vibration Control ◽  
Piezoelectric Actuators ◽  
Rotating Machinery ◽  
Active Vibration
Sign in / Sign up

Export Citation Format

Share Document