Theoretical study on the phase sensitivity of condenser type acoustic transducers at low frequencies

The phase sensitivity of the condenser type acoustic transducers at low frequencies is crucial for locating large-scale natural and manmade activities, but is now commonly calibrated based on comparison methods. Although the primary method, which traces its sensitivity back to the international standard unit is few studied. Recently, the explicit sensitivity models of the condenser type acoustic transducers based on the laser-pistonphone technique are built, and can be used to study the phase responses of acoustic transducers at infrasonic frequencies. So that, in this paper, the phase sensitivities of acoustic transducers when its rear vent connected to the calibrating sound field or outside atmosphere are studied in detail. Secondly, time domain analysis of generated sound pressures by displacement excitation are derived to reveal the mechanism of phase variation. Calculations show two distinct sensitivities with 90° phase lead and −10° phase lag limits for vent in field and vent out field calibrations, which are dominated by the pressure leakage and heat conduction effects at infrasonic frequencies.

A Current Control Algorithm to Improve Command Tracking Performance and Resilience of a Grid-Connected Inverter

This paper presents a stationary reference frame grid current control algorithm for a grid-connected inverter (GCI) to improve command tracking performance and resilience in response to disturbances, i.e., a grid voltage incident in a GCI current control system. In the proposed algorithm, disturbance rejection is applied to reduce the overcurrent at the GCI in response to a grid fault. Disturbances to the GCI current control system are estimated using a grid current observer, and the estimate applied to the grid current controller to activate the disturbance rejection. The stationary reference frame current of a GCI system is also controlled to avoid cross-coupling issues at a synchronous reference frame model, reference transformation and dependency to phase locked loop (PLL) performance. However, the phase lead or lag and steady-state response error, which are drawbacks of AC signal control based on stationary reference frame proportional-integral (PI) controller, must be eliminated in order to secure competition with the synchronous reference PI (SRFPI) controller that was mainly used in the GCI system. Hence, to compensate for command tracking the AC current, such as steady-state response error and phase lead or lag, command feedforward control is applied in the proposed control system. The theory behind the proposed GCI current control algorithm is analyzed, and the proposed algorithm is tested via simulation and experimentation.